Em Wed, 3 May 2017 09:53:03 -0300 Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx> escreveu: > Hi Gregor, > > Em Tue, 2 May 2017 22:30:29 +0200 > Gregor Jasny <gjasny@xxxxxxxxxxxxxx> escreveu: > > > Hello Clemens, > > > > On 4/1/17 5:50 PM, Clemens Ladisch wrote: > > > ETSI EN 300 468 V1.11.1 § 6.4.4.2 defines the bandwith field as having > > > four bits. > > > > I just used your patch and another to hopefully fix > > https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=859008 > > > > But I'm a little bit hesitant to merge it to v4l-utils git without > > Mauros acknowledgement. > > Patches look correct, but the T2 parser has a more serious issue that > will require breaking ABI/API compatibility. > > Let me explain a little more about te T2 delivery descriptor. > > Such descriptor is present on DVB-T2 streams, but the specs allow > a "simplified" version of it, with just 4 bytes: > 16 bytes for system ID; > 16 bytes for bit field. > > By the time this descriptor parser was written, the existing > DVB-T2 streams I got access were using this simplified version. > > After those 4 bytes, the DVB spec[1] allows a variable number of elements, > controlled by a C-like code, defined at the spec as[2]: > > for (i = 0; i < N, i++){ > cell_id // 16 bits > if (tfs_flag == 1) { > frequency_loop_length // 8 bits > for (j = 0; j < frequency_loop_length; j++) { > centre_frequency // 32 bis > } > } else { > centre_frequency // 32 bis > } > subcell_info_loop_length // 8 bits > for (k = 0; k < subcell_info_loop_length; k++) { > cell_id_extension // 8 bits > transposer_frequency // 32 bits > } > } > > where "N" is dynamically discovered, e. g. the logic checks if > there is still bytes left inside the descriptor, it will run the > loop. So, this is actually something like: > while (pos < size) { > // handle cell_ID logic > pos += number_of_bytes_parsed; > } > > > [1] https://www.dvb.org/resources/public/standards/a38_dvb-si_specification.pdf > [2] The code is not an exact copy of what's at the spec, as, at spec, all > loops use "N" instead of the name of the real variable that controls > the loop. > > There are two problems with the current code: > > 1) This struct that stores the subcell data is wrong. It is currently > defined as: > > struct dvb_desc_t2_delivery_subcell { > uint8_t cell_id_extension; > uint16_t transposer_frequency; > } __attribute__((packed)); > > However, the transposer frequency is actually 32 bits. From the specs: > > "transposer_frequency: This 32 bit field indicates the > centre frequency that is used by a transposer in the sub-cell > indicated. It is encoded in the same way as the centre_frequency > field." > > 2) Right now, the code assumes just one table of centre_frequency. > According with the specs (at least v1.13.1 - with is the latest > documentation), multiple tables can exist. > > I remember I tested it some years after the initial version, with a > DVB-T2 stream. On that time, there was just one frequency table, > e. g. just one cell ID. > > Yet, as now DVB-T2 is spreading, I won't doubt that we'll find some > places that use multiple cell IDs. > > At the end of the day, what really matters for a DVB scan program > is that all center_frequency and transposer_frequency to be > added to the frequencies that will be scanned. > > So, I'm thinking on a way to make a patch that would be > backward-compatible, e. g. adding both "centre_frequency" and > "transposer_frequency" at the centre_frequency table, and not > filling the subcell IDs, as the additional field there (the > subcell ID) is useless without the cell ID, and its parsing is > broken, anyway. > > We may latter add a way to store the cell ID and subcell ID at the > end of the structure. Ok, I added the above logic and merged the corresponding patch upstream. Unfortunately, the only DVB-T2 signal I have is simple: it doesn't have any subcel IDs. Yet, the first transport (4061) has two cell IDs (I added an extra debug prints to identify it (as, currently, we're not storing the cell ID anywhere): CELL ID= 6101 freq = 64200000 CELL ID= 0457 freq = 65000000 So, except for the subcel parsing, patch looks OK: NIT | table_id 0x40 | section_length 135 | one 3 | zero 1 | syntax 1 | transport_stream_id 12352 | current_next 1 | version 9 | one2 3 | section_number 0 | last_section_number 0 | desc_length 45 | 0x40: network_name_descriptor | network name: 'MEDIA BROADCAST' | 0x4a: linkage_descriptor | 40 71 21 14 42 4c 09 12 60 74 8d 0e 00 f6 00 05 @q!.BL..`t...... | 00 00 01 68 00 00 00 07 07 00 ...h...... |- transport 4061 network 2114 | 0x7f: extension_descriptor | descriptor T2_delivery_system_descriptor type 0x04 | plp_id 0 | system_id 7766 | tfs_flag 0 | other_frequency_flag 0 | transmission_mode 5 | guard_interval 1 | reserved 3 | bandwidth 0 | SISO MISO 0 | centre frequency[0] 64200000 | centre frequency[1] 65000000 | 0x41: Unknown descriptor | 03 01 1f 42 41 1f 42 42 1f 42 43 1f 42 44 1f 42 ...BA.BB.BC.BD.B | 45 1f E. |- transport 4071 network 2114 | 0x7f: extension_descriptor | descriptor T2_delivery_system_descriptor type 0x04 | plp_id 1 | system_id 7766 | tfs_flag 0 | other_frequency_flag 0 | transmission_mode 5 | guard_interval 1 | reserved 3 | bandwidth 0 | SISO MISO 0 | centre frequency[0] 72200000 |_ 2 transports Gregor, I'll cherry-pick the corresponding patches to the stable branch. Thanks, Mauro
