CbYCrY has been identified by looking into the tvp5150 driver and the saa7115 datasheet. YUV formats have been verified with em2765 + ov2640 (VAD Laplace webcam). RGB8 formats have been verified with em2710/em2820 + mt9v011 (Silvercrest webcam 1.3mpix). I also did some cross-checking with these two camera devices and 0x08-0x0b are at least 16 bits per pixel formats on em2710/em2820, too, and 0x0c-0x0f are at least 8 bits per pixel formats on em2765, too. Signed-off-by: Frank Schäfer <fschaefer.oss@xxxxxxxxxxxxxx> --- drivers/media/usb/em28xx/em28xx-camera.c | 10 ++++------ drivers/media/usb/em28xx/em28xx-reg.h | 18 ++++++++++++++++++ drivers/media/usb/em28xx/em28xx-video.c | 2 +- 3 files changed, 23 insertions(+), 7 deletions(-) diff --git a/drivers/media/usb/em28xx/em28xx-camera.c b/drivers/media/usb/em28xx/em28xx-camera.c index d43f630050bb..95eaa55356a9 100644 --- a/drivers/media/usb/em28xx/em28xx-camera.c +++ b/drivers/media/usb/em28xx/em28xx-camera.c @@ -364,8 +364,7 @@ int em28xx_init_camera(struct em28xx *dev) v4l2_i2c_new_subdev_board(&v4l2->v4l2_dev, adap, &mt9v011_info, NULL)) return -ENODEV; - /* probably means GRGB 16 bit bayer */ - v4l2->vinmode = 0x0d; + v4l2->vinmode = EM28XX_VINMODE_RGB8_GRBG; v4l2->vinctl = 0x00; break; @@ -376,8 +375,7 @@ int em28xx_init_camera(struct em28xx *dev) em28xx_initialize_mt9m001(dev); - /* probably means BGGR 16 bit bayer */ - v4l2->vinmode = 0x0c; + v4l2->vinmode = EM28XX_VINMODE_RGB8_BGGR; v4l2->vinctl = 0x00; break; @@ -389,7 +387,7 @@ int em28xx_init_camera(struct em28xx *dev) em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk); em28xx_initialize_mt9m111(dev); - v4l2->vinmode = 0x0a; + v4l2->vinmode = EM28XX_VINMODE_YUV422_UYVY; v4l2->vinctl = 0x00; break; @@ -430,7 +428,7 @@ int em28xx_init_camera(struct em28xx *dev) /* NOTE: for UXGA=1600x1200 switch to 12MHz */ dev->board.xclk = EM28XX_XCLK_FREQUENCY_24MHZ; em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk); - v4l2->vinmode = 0x08; + v4l2->vinmode = EM28XX_VINMODE_YUV422_YUYV; v4l2->vinctl = 0x00; break; diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h index afe7a66d7dc8..747525ca7ed5 100644 --- a/drivers/media/usb/em28xx/em28xx-reg.h +++ b/drivers/media/usb/em28xx/em28xx-reg.h @@ -93,6 +93,24 @@ #define EM28XX_XCLK_FREQUENCY_24MHZ 0x0b #define EM28XX_R10_VINMODE 0x10 + /* used by all non-camera devices: */ +#define EM28XX_VINMODE_YUV422_CbYCrY 0x10 + /* used by camera devices: */ +#define EM28XX_VINMODE_YUV422_YUYV 0x08 +#define EM28XX_VINMODE_YUV422_YVYU 0x09 +#define EM28XX_VINMODE_YUV422_UYVY 0x0a +#define EM28XX_VINMODE_YUV422_VYUY 0x0b +#define EM28XX_VINMODE_RGB8_BGGR 0x0c +#define EM28XX_VINMODE_RGB8_GRBG 0x0d +#define EM28XX_VINMODE_RGB8_GBRG 0x0e +#define EM28XX_VINMODE_RGB8_RGGB 0x0f + /* + * apparently: + * bit 0: swap component 1+2 with 3+4 + * => e.g.: YUYV => YVYU, BGGR => GRBG + * bit 1: swap component 1 with 2 and 3 with 4 + * => e.g.: YUYV => UYVY, BGGR => GBRG + */ #define EM28XX_R11_VINCTRL 0x11 diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c index 3cbc3d4270a3..aaa83f9e5c1a 100644 --- a/drivers/media/usb/em28xx/em28xx-video.c +++ b/drivers/media/usb/em28xx/em28xx-video.c @@ -2459,7 +2459,7 @@ static int em28xx_v4l2_init(struct em28xx *dev) /* * Default format, used for tvp5150 or saa711x output formats */ - v4l2->vinmode = 0x10; + v4l2->vinmode = EM28XX_VINMODE_YUV422_CbYCrY; v4l2->vinctl = EM28XX_VINCTRL_INTERLACED | EM28XX_VINCTRL_CCIR656_ENABLE; -- 2.12.2
