From: Hans Verkuil <hans.verkuil@xxxxxxxxx> When the OMAP4 CEC support is enabled the CEC pin should always be on. So keep ls_oe_gpio high when CONFIG_OMAP4_DSS_HDMI_CEC is set. Background: even if the HPD is low it should still be possible to use CEC. Some displays will set the HPD low when they go into standby or when they switch to another input, but CEC is still available and able to wake up/change input for such a display. This is explicitly allowed by the CEC standard. Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx> --- drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c b/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c index 58276a48112e..757554e6d62f 100644 --- a/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c +++ b/drivers/gpu/drm/omapdrm/displays/encoder-tpd12s015.c @@ -46,6 +46,9 @@ static int tpd_connect(struct omap_dss_device *dssdev, dssdev->dst = dst; gpiod_set_value_cansleep(ddata->ct_cp_hpd_gpio, 1); +#ifdef CONFIG_OMAP4_DSS_HDMI_CEC + gpiod_set_value_cansleep(ddata->ls_oe_gpio, 1); +#endif /* DC-DC converter needs at max 300us to get to 90% of 5V */ udelay(300); @@ -64,6 +67,7 @@ static void tpd_disconnect(struct omap_dss_device *dssdev, return; gpiod_set_value_cansleep(ddata->ct_cp_hpd_gpio, 0); + gpiod_set_value_cansleep(ddata->ls_oe_gpio, 0); dst->src = NULL; dssdev->dst = NULL; @@ -146,11 +150,15 @@ static int tpd_read_edid(struct omap_dss_device *dssdev, if (!gpiod_get_value_cansleep(ddata->hpd_gpio)) return -ENODEV; +#ifndef CONFIG_OMAP4_DSS_HDMI_CEC gpiod_set_value_cansleep(ddata->ls_oe_gpio, 1); +#endif r = in->ops.hdmi->read_edid(in, edid, len); +#ifndef CONFIG_OMAP4_DSS_HDMI_CEC gpiod_set_value_cansleep(ddata->ls_oe_gpio, 0); +#endif return r; } -- 2.11.0
