Add these misspellings to scripts/spelling.txt too
Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 2 +-
drivers/net/ethernet/hisilicon/hns/hns_enet.c | 2 +-
drivers/net/ethernet/qlogic/qed/qed_int.c | 2 +-
drivers/net/ethernet/qlogic/qed/qed_main.c | 2 +-
drivers/net/ethernet/qlogic/qed/qed_sriov.c | 2 +-
include/linux/mlx4/device.h | 2 +-
scripts/spelling.txt | 3 +++
8 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h b/drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h
index 354ec07eae87..23ae72468025 100644
--- a/drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h
+++ b/drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h
@@ -70,7 +70,7 @@
* (3) both long and short but short preferred and long only when necesarry
*
* These modes must be selected compile time via compile switches.
-* Compile switch settings for the diffrent modes:
+* Compile switch settings for the different modes:
* (1) DRXDAPFASI_LONG_ADDR_ALLOWED=0, DRXDAPFASI_SHORT_ADDR_ALLOWED=1
* (2) DRXDAPFASI_LONG_ADDR_ALLOWED=1, DRXDAPFASI_SHORT_ADDR_ALLOWED=0
* (3) DRXDAPFASI_LONG_ADDR_ALLOWED=1, DRXDAPFASI_SHORT_ADDR_ALLOWED=1
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index cea6bdcde33f..8baf9d3eb4b1 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -1591,7 +1591,7 @@ static int __bnx2x_vlan_mac_execute_step(struct bnx2x *bp,
if (rc != 0) {
__bnx2x_vlan_mac_h_pend(bp, o, *ramrod_flags);
- /* Calling function should not diffrentiate between this case
+ /* Calling function should not differentiate between this case
* and the case in which there is already a pending ramrod
*/
rc = 1;
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
index fca37e2c7f01..e70324f4fe84 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -1207,7 +1207,7 @@ static void hns_set_irq_affinity(struct hns_nic_priv *priv)
if (!alloc_cpumask_var(&mask, GFP_KERNEL))
return;
- /*diffrent irq banlance for 16core and 32core*/
+ /* different irq balance for 16core and 32core */
if (h->q_num == num_possible_cpus()) {
for (i = 0; i < h->q_num * 2; i++) {
rd = &priv->ring_data[i];
diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c
index 84310b60849b..c6b348f00e7b 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.c
@@ -3057,7 +3057,7 @@ int qed_int_igu_read_cam(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
/* There's a possibility the igu_sb_cnt_iov doesn't properly reflect
* the number of VF SBs [especially for first VF on engine, as we can't
- * diffrentiate between empty entries and its entries].
+ * differentiate between empty entries and its entries].
* Since we don't really support more SBs than VFs today, prevent any
* such configuration by sanitizing the number of SBs to equal the
* number of VFs.
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index d4edb993b1b0..b595f7dd4a58 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -951,7 +951,7 @@ static int qed_slowpath_start(struct qed_dev *cdev,
if (rc)
goto err2;
- /* First Dword used to diffrentiate between various sources */
+ /* First Dword used to differentiate between various sources */
data = cdev->firmware->data + sizeof(u32);
qed_dbg_pf_init(cdev);
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
index 18fc6e62ca41..a69774b19712 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c
@@ -625,7 +625,7 @@ int qed_iov_hw_info(struct qed_hwfn *p_hwfn)
* - If !ARI, VFs would start on next device.
* so offset - (256 - pf_id) would provide the number.
* Utilize the fact that (256 - pf_id) is achieved only by later
- * to diffrentiate between the two.
+ * to differentiate between the two.
*/
if (p_hwfn->cdev->p_iov_info->offset < (256 - p_hwfn->abs_pf_id)) {
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 1beb1ec2fbdf..eb1a51a6617b 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -108,7 +108,7 @@ enum {
MLX4_MFUNC_EQE_MASK = (MLX4_MFUNC_MAX_EQES - 1)
};
-/* Driver supports 3 diffrent device methods to manage traffic steering:
+/* Driver supports 3 different device methods to manage traffic steering:
* -device managed - High level API for ib and eth flow steering. FW is
* managing flow steering tables.
* - B0 steering mode - Common low level API for ib and (if supported) eth.
diff --git a/scripts/spelling.txt b/scripts/spelling.txt
index 412f576ba4d7..e9cea4c5b6a1 100644
--- a/scripts/spelling.txt
+++ b/scripts/spelling.txt
@@ -174,6 +174,7 @@ bakup||backup
baloon||balloon
baloons||balloons
bandwith||bandwidth
+banlance||balance
batery||battery
beacuse||because
becasue||because
@@ -365,6 +366,8 @@ dictionnary||dictionary
didnt||didn't
diferent||different
differrence||difference
+diffrent||different
+diffrentiate||differentiate
difinition||definition
diplay||display
direectly||directly
--
2.10.0.rc2.1.g053435c
