Hello All, I spent the last 4 days reading mailing lists and testing stuff in my Mythbuntu installation. I have a x86 machine running the latest Mythbuntu version, attached a DM1105 PCI DVB-S card. I read other trails from people having different kind of problems to tune or lock a freq on this card... I am having similar problems, I try to tune to well known and tested frequesncies and S Rates, with out luck This is what I get tuninmg to a tested freq, there is an unencrypted channel on this tp: *************************************************************************************** master@Main:~/DVB$ dvbtune -f 12092000 -s 28888 -p H Using DVB card "ST STV0299 DVB-S" tuning DVB-S to L-Band:0, Pol:H Srate=28888000, 22kHz=off ERROR setting tone : Connection timed out polling.... Getting frontend event FE_STATUS: polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL polling.... polling.... polling.... polling.... *************************************************************************************** In a different terminal, I ran dvbsnoop to check parameters, and here what I get: *************************************************************************************** master@Main:~/DVB$ dvbsnoop -s feinfo dvbsnoop V1.4.50 -- http://dvbsnoop.sourceforge.net/ --------------------------------------------------------- FrontEnd Info... --------------------------------------------------------- Device: /dev/dvb/adapter0/frontend0 Basic capabilities: Name: "ST STV0299 DVB-S" Frontend-type: QPSK (DVB-S) Frequency (min): 950.000 MHz Frequency (max): 2150.000 MHz Frequency stepsiz: 0.125 MHz Frequency tolerance: 0.000 MHz Symbol rate (min): 1.000000 MSym/s Symbol rate (max): 45.000000 MSym/s Symbol rate tolerance: 500 ppm Notifier delay: 0 ms Frontend capabilities: auto inversion FEC 1/2 FEC 2/3 FEC 3/4 FEC 5/6 FEC 7/8 FEC AUTO QPSK Current parameters: Frequency: 1492.000 MHz Inversion: ON Symbol rate: 37.334000 MSym/s FEC: FEC 2/3 ********************************************************************* Looks like the frequency parameter set by dvbtune are not taken by the card. I also tested with szap, with well known freq,SR, VPID, etc, with the same result, nothing appears in /dev/dvb/adapter0/dvr0 Any ideas about what to test is highly appreacited.... Greetings from Ecuador... -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
