On Wed, Mar 29, 2017 at 11:56:08AM +0200, Sylwester Nawrocki wrote:
> On 12/13/2016 06:44 AM, Nicholas Mc Guire wrote:
> >The Depends on: tag in Kconfig for CONFIG_VIDEO_M5MOLS does not list
> >VIDEO_IR_I2C so Kconfig displays the dependencies needed so the M-5MOLS
> >driver can not be found.
> >
> >Fixes: commit cb7a01ac324b ("[media] move i2c files into drivers/media/i2c")
> >Signed-off-by: Nicholas Mc Guire <hofrat@xxxxxxxxx>
> >---
> >
> >searching for VIDEO_M5MOLS in menuconfig currently shows the following
> >dependencies
> > Depends on: MEDIA_SUPPORT [=m] && I2C [=y] && VIDEO_V4L2 [=m] && \
> > VIDEO_V4L2_SUBDEV_API [=y] && MEDIA_CAMERA_SUPPORT [=y]
> >but as the default settings include MEDIA_SUBDRV_AUTOSELECT=y the
> >"I2C module for IR" submenu (CONFIG_VIDEO_IR_I2C) is not displayed
> >adding the VIDEO_IR_I2C to the dependency list makes this clear
>
> > drivers/media/i2c/m5mols/Kconfig | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> >diff --git a/drivers/media/i2c/m5mols/Kconfig b/drivers/media/i2c/m5mols/Kconfig
> >index dc8c250..6847a1b 100644
> >--- a/drivers/media/i2c/m5mols/Kconfig
> >+++ b/drivers/media/i2c/m5mols/Kconfig
> >@@ -1,6 +1,6 @@
> > config VIDEO_M5MOLS
> > tristate "Fujitsu M-5MOLS 8MP sensor support"
> >- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
> >+ depends on I2C && VIDEO_IR_I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
>
> There should be no need to enable the "I2C module for IR" to use m5mols
> driver, so the bug fix needs to be somewhere else.
>
yup - my bad - not clear how I came to that conclusion, guess it was due
to the indirection of VIDEO_M5MOLS needing !CONFIG_MEDIA_SUBDRV_AUTOSELECT
Step-by-step its:
0) x86_64_defconfig
Depends on: MEDIA_SUPPORT [=n] && I2C [=y] && VIDEO_V4L2 [=n] && VIDEO_V4L2_SUBDEV_API [=n] && MEDIA_CAMERA_SUPPORT [=n]
1) <M> Multimedia support --->
Depends on: MEDIA_SUPPORT [=m] && I2C [=y] && VIDEO_V4L2 [=n] && VIDEO_V4L2_SUBDEV_API [=n] && MEDIA_CAMERA_SUPPORT [=n]
2) [*] Cameras/video grabbers support
Depends on: MEDIA_SUPPORT [=m] && I2C [=y] && VIDEO_V4L2 [=m] && VIDEO_V4L2_SUBDEV_API [=n] && MEDIA_CAMERA_SUPPORT [=y]
3) [*] Media Controller API (NEW)
[*] V4L2 sub-device userspace API (NEW)
Depends on: MEDIA_SUPPORT [=m] && I2C [=y] && VIDEO_V4L2 [=m] && VIDEO_V4L2_SUBDEV_API [=y] && MEDIA_CAMERA_SUPPORT [=y]
So now all listed dependencies are satisfied but the M-5MOLS drive is not
visible du to default CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
Not sure how I ended up with the VIDEO_IR_I2C dependency - which as you
state - is wrong. though VIDEO_M5MOLS probably needs a
!CONFIG_MEDIA_SUBDRV_AUTOSELECT in the dependency list though.
thx!
hofrat
