Internal MFC driver device structure contains two entries for keeping addresses of the DMA memory banks. Replace them with the dma_base[] array and use defines for accessing particular banks. This will help to simplify code in the next patches. Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx> Tested-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx> Acked-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx> Tested-by: Smitha T Murthy <smitha.t@xxxxxxxxxxx> --- drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 6 ++-- drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 27 +++++++++++------- drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c | 38 +++++++++++++------------ drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 10 +++---- 4 files changed, 43 insertions(+), 38 deletions(-) diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h index 27d4c864e06e..da601a2dba2f 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h @@ -273,8 +273,7 @@ struct s5p_mfc_priv_buf { * @queue: waitqueue for waiting for completion of device commands * @fw_size: size of firmware * @fw_virt_addr: virtual firmware address - * @bank1: address of the beginning of bank 1 memory - * @bank2: address of the beginning of bank 2 memory + * @dma_base[]: address of the beginning of memory banks * @hw_lock: used for hardware locking * @ctx: array of driver contexts * @curr_ctx: number of the currently running context @@ -315,8 +314,7 @@ struct s5p_mfc_dev { wait_queue_head_t queue; size_t fw_size; void *fw_virt_addr; - dma_addr_t bank1; - dma_addr_t bank2; + dma_addr_t dma_base[BANK_CTX_NUM]; unsigned long hw_lock; struct s5p_mfc_ctx *ctx[MFC_NUM_CONTEXTS]; int curr_ctx; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c index cd1406c75d9a..c9bff3d0655f 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c @@ -38,8 +38,8 @@ int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev) } dev->fw_virt_addr = dma_alloc_coherent(dev->mem_dev[BANK1_CTX], - dev->fw_size, &dev->bank1, GFP_KERNEL); - + dev->fw_size, &dev->dma_base[BANK1_CTX], + GFP_KERNEL); if (!dev->fw_virt_addr) { mfc_err("Allocating bitprocessor buffer failed\n"); return -ENOMEM; @@ -52,7 +52,8 @@ int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev) if (!bank2_virt) { mfc_err("Allocating bank2 base failed\n"); dma_free_coherent(dev->mem_dev[BANK1_CTX], dev->fw_size, - dev->fw_virt_addr, dev->bank1); + dev->fw_virt_addr, + dev->dma_base[BANK1_CTX]); dev->fw_virt_addr = NULL; return -ENOMEM; } @@ -61,7 +62,7 @@ int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev) * should not have address of bank2 - MFC will treat it as a null frame. * To avoid such situation we set bank2 address below the pool address. */ - dev->bank2 = bank2_dma_addr - align_size; + dev->dma_base[BANK2_CTX] = bank2_dma_addr - align_size; dma_free_coherent(dev->mem_dev[BANK2_CTX], align_size, bank2_virt, bank2_dma_addr); @@ -70,7 +71,7 @@ int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev) /* In this case bank2 can point to the same address as bank1. * Firmware will always occupy the beginning of this area so it is * impossible having a video frame buffer with zero address. */ - dev->bank2 = dev->bank1; + dev->dma_base[BANK2_CTX] = dev->dma_base[BANK1_CTX]; } return 0; } @@ -125,7 +126,7 @@ int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev) if (!dev->fw_virt_addr) return -EINVAL; dma_free_coherent(dev->mem_dev[BANK1_CTX], dev->fw_size, - dev->fw_virt_addr, dev->bank1); + dev->fw_virt_addr, dev->dma_base[BANK1_CTX]); dev->fw_virt_addr = NULL; return 0; } @@ -211,13 +212,17 @@ int s5p_mfc_reset(struct s5p_mfc_dev *dev) static inline void s5p_mfc_init_memctrl(struct s5p_mfc_dev *dev) { if (IS_MFCV6_PLUS(dev)) { - mfc_write(dev, dev->bank1, S5P_FIMV_RISC_BASE_ADDRESS_V6); - mfc_debug(2, "Base Address : %pad\n", &dev->bank1); + mfc_write(dev, dev->dma_base[BANK1_CTX], + S5P_FIMV_RISC_BASE_ADDRESS_V6); + mfc_debug(2, "Base Address : %pad\n", + &dev->dma_base[BANK1_CTX]); } else { - mfc_write(dev, dev->bank1, S5P_FIMV_MC_DRAMBASE_ADR_A); - mfc_write(dev, dev->bank2, S5P_FIMV_MC_DRAMBASE_ADR_B); + mfc_write(dev, dev->dma_base[BANK1_CTX], + S5P_FIMV_MC_DRAMBASE_ADR_A); + mfc_write(dev, dev->dma_base[BANK2_CTX], + S5P_FIMV_MC_DRAMBASE_ADR_B); mfc_debug(2, "Bank1: %pad, Bank2: %pad\n", - &dev->bank1, &dev->bank2); + &dev->dma_base[BANK1_CTX], &dev->dma_base[BANK2_CTX]); } } diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c index 65dd3e64b4db..32ce9ade2edb 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c @@ -30,8 +30,8 @@ #include <linux/mm.h> #include <linux/sched.h> -#define OFFSETA(x) (((x) - dev->bank1) >> MFC_OFFSET_SHIFT) -#define OFFSETB(x) (((x) - dev->bank2) >> MFC_OFFSET_SHIFT) +#define OFFSETA(x) (((x) - dev->dma_base[BANK1_CTX]) >> MFC_OFFSET_SHIFT) +#define OFFSETB(x) (((x) - dev->dma_base[BANK2_CTX]) >> MFC_OFFSET_SHIFT) /* Allocate temporary buffers for decoding */ static int s5p_mfc_alloc_dec_temp_buffers_v5(struct s5p_mfc_ctx *ctx) @@ -41,8 +41,8 @@ static int s5p_mfc_alloc_dec_temp_buffers_v5(struct s5p_mfc_ctx *ctx) int ret; ctx->dsc.size = buf_size->dsc; - ret = s5p_mfc_alloc_priv_buf(dev->mem_dev[BANK1_CTX], dev->bank1, - &ctx->dsc); + ret = s5p_mfc_alloc_priv_buf(dev->mem_dev[BANK1_CTX], + dev->dma_base[BANK1_CTX], &ctx->dsc); if (ret) { mfc_err("Failed to allocate temporary buffer\n"); return ret; @@ -174,7 +174,7 @@ static int s5p_mfc_alloc_codec_buffers_v5(struct s5p_mfc_ctx *ctx) if (ctx->bank1.size > 0) { ret = s5p_mfc_alloc_priv_buf(dev->mem_dev[BANK1_CTX], - dev->bank1, &ctx->bank1); + dev->dma_base[BANK1_CTX], &ctx->bank1); if (ret) { mfc_err("Failed to allocate Bank1 temporary buffer\n"); return ret; @@ -184,7 +184,7 @@ static int s5p_mfc_alloc_codec_buffers_v5(struct s5p_mfc_ctx *ctx) /* Allocate only if memory from bank 2 is necessary */ if (ctx->bank2.size > 0) { ret = s5p_mfc_alloc_priv_buf(dev->mem_dev[BANK2_CTX], - dev->bank2, &ctx->bank2); + dev->dma_base[BANK2_CTX], &ctx->bank2); if (ret) { mfc_err("Failed to allocate Bank2 temporary buffer\n"); s5p_mfc_release_priv_buf(ctx->dev->mem_dev[BANK1_CTX], @@ -216,8 +216,8 @@ static int s5p_mfc_alloc_instance_buffer_v5(struct s5p_mfc_ctx *ctx) else ctx->ctx.size = buf_size->non_h264_ctx; - ret = s5p_mfc_alloc_priv_buf(dev->mem_dev[BANK1_CTX], dev->bank1, - &ctx->ctx); + ret = s5p_mfc_alloc_priv_buf(dev->mem_dev[BANK1_CTX], + dev->dma_base[BANK1_CTX], &ctx->ctx); if (ret) { mfc_err("Failed to allocate instance buffer\n"); return ret; @@ -230,8 +230,8 @@ static int s5p_mfc_alloc_instance_buffer_v5(struct s5p_mfc_ctx *ctx) /* Initialize shared memory */ ctx->shm.size = buf_size->shm; - ret = s5p_mfc_alloc_priv_buf(dev->mem_dev[BANK1_CTX], dev->bank1, - &ctx->shm); + ret = s5p_mfc_alloc_priv_buf(dev->mem_dev[BANK1_CTX], + dev->dma_base[BANK1_CTX], &ctx->shm); if (ret) { mfc_err("Failed to allocate shared memory buffer\n"); s5p_mfc_release_priv_buf(dev->mem_dev[BANK1_CTX], &ctx->ctx); @@ -239,7 +239,7 @@ static int s5p_mfc_alloc_instance_buffer_v5(struct s5p_mfc_ctx *ctx) } /* shared memory offset only keeps the offset from base (port a) */ - ctx->shm.ofs = ctx->shm.dma - dev->bank1; + ctx->shm.ofs = ctx->shm.dma - dev->dma_base[BANK1_CTX]; BUG_ON(ctx->shm.ofs & ((1 << MFC_BANK1_ALIGN_ORDER) - 1)); memset(ctx->shm.virt, 0, buf_size->shm); @@ -538,10 +538,10 @@ static void s5p_mfc_get_enc_frame_buffer_v5(struct s5p_mfc_ctx *ctx, { struct s5p_mfc_dev *dev = ctx->dev; - *y_addr = dev->bank2 + (mfc_read(dev, S5P_FIMV_ENCODED_Y_ADDR) - << MFC_OFFSET_SHIFT); - *c_addr = dev->bank2 + (mfc_read(dev, S5P_FIMV_ENCODED_C_ADDR) - << MFC_OFFSET_SHIFT); + *y_addr = dev->dma_base[BANK2_CTX] + + (mfc_read(dev, S5P_FIMV_ENCODED_Y_ADDR) << MFC_OFFSET_SHIFT); + *c_addr = dev->dma_base[BANK2_CTX] + + (mfc_read(dev, S5P_FIMV_ENCODED_C_ADDR) << MFC_OFFSET_SHIFT); } /* Set encoding ref & codec buffer */ @@ -1218,7 +1218,8 @@ static int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx) } if (list_empty(&ctx->src_queue)) { /* send null frame */ - s5p_mfc_set_enc_frame_buffer_v5(ctx, dev->bank2, dev->bank2); + s5p_mfc_set_enc_frame_buffer_v5(ctx, dev->dma_base[BANK2_CTX], + dev->dma_base[BANK2_CTX]); src_mb = NULL; } else { src_mb = list_entry(ctx->src_queue.next, struct s5p_mfc_buf, @@ -1226,8 +1227,9 @@ static int s5p_mfc_run_enc_frame(struct s5p_mfc_ctx *ctx) src_mb->flags |= MFC_BUF_FLAG_USED; if (src_mb->b->vb2_buf.planes[0].bytesused == 0) { /* send null frame */ - s5p_mfc_set_enc_frame_buffer_v5(ctx, dev->bank2, - dev->bank2); + s5p_mfc_set_enc_frame_buffer_v5(ctx, + dev->dma_base[BANK2_CTX], + dev->dma_base[BANK2_CTX]); ctx->state = MFCINST_FINISHING; } else { src_y_addr = vb2_dma_contig_plane_dma_addr( diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c index e23ca08e88c5..f1a6a3539549 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c @@ -240,7 +240,7 @@ static int s5p_mfc_alloc_codec_buffers_v6(struct s5p_mfc_ctx *ctx) /* Allocate only if memory from bank 1 is necessary */ if (ctx->bank1.size > 0) { ret = s5p_mfc_alloc_priv_buf(dev->mem_dev[BANK1_CTX], - dev->bank1, &ctx->bank1); + dev->dma_base[BANK1_CTX], &ctx->bank1); if (ret) { mfc_err("Failed to allocate Bank1 memory\n"); return ret; @@ -292,8 +292,8 @@ static int s5p_mfc_alloc_instance_buffer_v6(struct s5p_mfc_ctx *ctx) break; } - ret = s5p_mfc_alloc_priv_buf(dev->mem_dev[BANK1_CTX], dev->bank1, - &ctx->ctx); + ret = s5p_mfc_alloc_priv_buf(dev->mem_dev[BANK1_CTX], + dev->dma_base[BANK1_CTX], &ctx->ctx); if (ret) { mfc_err("Failed to allocate instance buffer\n"); return ret; @@ -322,8 +322,8 @@ static int s5p_mfc_alloc_dev_context_buffer_v6(struct s5p_mfc_dev *dev) mfc_debug_enter(); dev->ctx_buf.size = buf_size->dev_ctx; - ret = s5p_mfc_alloc_priv_buf(dev->mem_dev[BANK1_CTX], dev->bank1, - &dev->ctx_buf); + ret = s5p_mfc_alloc_priv_buf(dev->mem_dev[BANK1_CTX], + dev->dma_base[BANK1_CTX], &dev->ctx_buf); if (ret) { mfc_err("Failed to allocate device context buffer\n"); return ret; -- 1.9.1