On Tue, Mar 07, 2017 at 02:37:50PM +0000, Ramiro Oliveira wrote:
> Create device tree bindings documentation for the CSI-2 Host Video
> platform.
>
> Signed-off-by: Ramiro Oliveira <roliveir@xxxxxxxxxxxx>
> ---
> .../devicetree/bindings/media/snps,plat-csi2.txt | 77 ++++++++++++++++++++++
> 1 file changed, 77 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/snps,plat-csi2.txt
>
> diff --git a/Documentation/devicetree/bindings/media/snps,plat-csi2.txt b/Documentation/devicetree/bindings/media/snps,plat-csi2.txt
> new file mode 100644
> index 000000000000..f559257a0a44
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/snps,plat-csi2.txt
> @@ -0,0 +1,77 @@
> +Synopsys DesignWare CSI-2 Host Video Platform
> +
> +The Synopsys DesignWare CSI-2 Host Video Device subsystem comprises of multiple
> +sub-devices represented by separate device tree nodes. Currently this includes:
> +plat-csi2, video-device, and dw-mipi-csi.
> +
> +The sub-subdevices are defined as child nodes of the common 'camera'.
> +
> +Common 'camera' node
> +--------------------
> +
> +Required properties:
> +
> +- compatible: must be "snps,plat-csi2", "simple-bus"
> +
> +The 'camera' node must include at least one 'video-device' and one 'dw-mipi-csi'
> +child node.
> +
> +'video-device' device nodes
> +-------------------
> +
> +Required properties:
> +
> +- compatible: "snps,video-device"
> +- dmas, dma-names: List of one DMA specifier and identifier string (as defined
> + in Documentation/devicetree/bindings/dma/dma.txt) per port. Each port
> + requires a DMA channel with the identifier string set to "vdma" followed by
> + the port index.
> +
> +Image sensor nodes
> +------------------
> +
> +The sensor device nodes should be added to their control bus controller (e.g.
> +I2C0) nodes and linked to a port node in the dw-mipi-csi,using the common video
> +interfaces bindings, defined in video-interfaces.txt.
> +
> +Example:
> +
> +
> + camera {
> + compatible = "snps,plat-csi2", "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + video_device: video-device@0x10000 {
Drop the '0x' and any leading 0s on unit addresses.
> + compatible = "snps,video-device";
> + dmas = <&axi_vdma_0 0>;
> + dma-names = "vdma0";
> + };
If video-device is not a real device, then you shouldn't need a DT node.
I need a better explanation or diagram of what the h/w blocks and
connections look like here.
>From the looks of this, you can just move dmas to the csi2 node. But I
don't think that is right, because you can't generally just use an
external DMA controller with camera data (maybe for validation, but it's
not something you see in SoCs).
> +
> + csi2: csi2@0x03000 {
> + compatible = "snps,dw-mipi-csi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = < 0x03000 0x7FF>;
> + interrupts = <2>;
> + phys = <&mipi_phy_ctrl1 0>;
> + resets = <&csi2_rst 1>;
> +
> + output-type = <2>;
> + ipi-mode = <0>;
> + ipi-color-mode = <0>;
> + ipi-auto-flush = <1>;
> + virtual-channel = <0>;
> +
> + port@1 {
> + reg = <1>;
> + csi1_ep1: endpoint {
> + remote-endpoint = <&camera>;
> + data-lanes = <1 2>;
> + };
> + };
> + };
> + };
> + };
> +
> +The dw-mipi-csi device binding is defined in snps,dw-mipi-csi.txt.
> --
> 2.11.0
>
>
