Version 5 gives me no v4l2 controls exposed through the video device interface. Just like with version 4, version 5 is completely useless with IMX219: imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000200 ipu1_csi0: pipeline start failed with -110 imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000200 ipu1_csi0: pipeline start failed with -110 imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000200 ipu1_csi0: pipeline start failed with -110 So, like v4, I can't do any further testing. On Thu, Mar 09, 2017 at 08:52:40PM -0800, Steve Longerbeam wrote: > In version 5: > > - ov5640: renamed "pwdn-gpios" to "powerdown-gpios" > > - ov5640: add mutex lock around the subdev op entry points. > > - ov5640: don't attempt to program the new mode in ov5640_set_fmt(). > Instead set a new flag, pending_mode_change, and program the new > mode at s_stream() if flag is set. > > - ov5640: implement [gs]_frame_interval. As part of that, create > ov5640_try_frame_interval(), which is used by both [gs]_frame_interval > and [gs]_parm. > > - ov5640: don't attempt to set controls in ov5640_s_ctrl(), or at > mode change, do it instead after first power-up. > > - video-multiplexer: include link_validate in media_entity_operations. > > - video-multiplexer: enforce that output pad frame interval must match > input pad frame interval in vidsw_s_frame_interval(). > > - video-multiplexer: initialize frame interval to a default 30 fps. > > - mipi csi-2: renamed "cfg" clock name property to "ref". This is the > 27 MHz mipi csi-2 PLL reference clock. > > - mipi csi-2: create a hsfreq_map[] table based on > https://community.nxp.com/docs/DOC-94312. Use it to select > a hsfreqrange_sel value when programming the D-PHY, based on > a max Mbps per lane. This is computed from the source subdev > via V4L2_CID_LINK_FREQ control, and if the subdev doesn't implement > that control, use a default hard-coded max Mbps per lane. > > - added required ports property description to imx-media binding doc. > > - removed event V4L2_EVENT_FRAME_TIMEOUT. On a frame timeout, which > is always unrecoverable, call vb2_queue_error() instead. > > - export the remaining custom events to V4L2_EVENT_FRAME_INTERVAL_ERROR > and V4L2_EVENT_NEW_FRAME_BEFORE_EOF. > > - vdic: use V4L2_CID_DEINTERLACING_MODE for motion compensation control > instead of a custom control. > > - add v4l2_subdev_link_validate_frame_interval(). Call this in the > link_validate imx-media subdev callbacks and video-multiplexer. > > - fix subdev event registration: implementation of subscribe_event() > and unsubscribe_event() subdev ops were missing. > > - all calls from the pipeline to the sensor subdev have been removed. > Only the CSI subdev still refers to a sensor, and only to retrieve > its media bus config, which is necessary to setup the CSI interface. > > - add mutex locks around the imx-media subdev op entry points. > > - completed the propagation of all pad format parameters from sink > pads to source pads within every imx-media subdev. > > - implement [gs]_frame_interval in all the imx-media subdevs. > > - imx-ic-prpencvf: there isn't necessarily a CSI subdev in the pipeline > in the future, so make sure this is optional when calling the CSI's > FIM. > > - the source pads that attach to capture device nodes now require the > IPU internal pixel codes. The capture device translates these to > v4l2 fourcc memory formats. > > - fix control inheritance to the capture device. When the pipeline > was modified, the inherited controls were not being refreshed. > v4l2_pipeline_inherit_controls() is now called only in imx-media > link_notify() callback when a pipelink link is disabled or modified. > imx_media_find_pipeline_video_device() is created to locate the > capture device in the pipeline. > > - fix a possible race when propagating formats to the capture device. > The subdevs and capture device use different mutex locks when setting > formats. imx_media_capture_device_set_format() is created which acquires > the capture device mutex when updating the capture device format. > > - verify all subdevs were bound in the async completion callback. > > > Philipp Zabel (7): > [media] dt-bindings: Add bindings for video-multiplexer device > ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their > connections > add mux and video interface bridge entity functions > platform: add video-multiplexer subdevice driver > media: imx: csi: fix crop rectangle changes in set_fmt > media: imx: csi: add frame skipping support > media: imx: csi: fix crop rectangle reset in sink set_fmt > > Russell King (4): > media: imx: add support for bayer formats > media: imx: csi: add support for bayer formats > media: imx: mipi-csi2: enable setting and getting of frame rates > media: imx: csi/fim: add support for frame intervals > > Steve Longerbeam (28): > [media] dt-bindings: Add bindings for i.MX media driver > [media] dt/bindings: Add bindings for OV5640 > ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node > ARM: dts: imx6qdl: add capture-subsystem device > ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround > ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors > ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors > ARM: dts: imx6-sabreauto: create i2cmux for i2c3 > ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b > ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture > ARM: dts: imx6-sabreauto: add the ADV7180 video decoder > [media] v4l2: add a frame interval error event > [media] v4l2: add a new-frame before end-of-frame event > [media] v4l2-mc: add a function to inherit controls from a pipeline > [media] v4l: subdev: Add function to validate frame interval > [media] add Omnivision OV5640 sensor driver > UAPI: Add media UAPI Kbuild file > media: Add userspace header file for i.MX > media: Add i.MX media core driver > media: imx: Add Capture Device Interface > media: imx: Add CSI subdev driver > media: imx: Add VDIC subdev driver > media: imx: Add IC subdev drivers > media: imx: Add MIPI CSI-2 Receiver subdev driver > ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers > media: imx: csi: add __csi_get_fmt > media: imx: redo pixel format enumeration and negotiation > media: imx: propagate sink pad formats to source pads > > .../devicetree/bindings/media/i2c/ov5640.txt | 45 + > Documentation/devicetree/bindings/media/imx.txt | 74 + > .../bindings/media/video-multiplexer.txt | 59 + > Documentation/media/uapi/mediactl/media-types.rst | 22 + > Documentation/media/uapi/v4l/vidioc-dqevent.rst | 12 + > Documentation/media/v4l-drivers/imx.rst | 560 +++++ > Documentation/media/videodev2.h.rst.exceptions | 2 + > arch/arm/boot/dts/imx6dl-sabrelite.dts | 5 + > arch/arm/boot/dts/imx6dl-sabresd.dts | 5 + > arch/arm/boot/dts/imx6dl.dtsi | 185 ++ > arch/arm/boot/dts/imx6q-sabrelite.dts | 5 + > arch/arm/boot/dts/imx6q-sabresd.dts | 5 + > arch/arm/boot/dts/imx6q.dtsi | 121 ++ > arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 144 +- > arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 152 +- > arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 114 +- > arch/arm/boot/dts/imx6qdl.dtsi | 17 +- > arch/arm/configs/imx_v6_v7_defconfig | 11 + > drivers/media/i2c/Kconfig | 7 + > drivers/media/i2c/Makefile | 1 + > drivers/media/i2c/ov5640.c | 2231 ++++++++++++++++++++ > drivers/media/platform/Kconfig | 8 + > drivers/media/platform/Makefile | 2 + > drivers/media/platform/video-multiplexer.c | 498 +++++ > drivers/media/v4l2-core/v4l2-mc.c | 48 + > drivers/media/v4l2-core/v4l2-subdev.c | 50 + > drivers/staging/media/Kconfig | 2 + > drivers/staging/media/Makefile | 1 + > drivers/staging/media/imx/Kconfig | 20 + > drivers/staging/media/imx/Makefile | 12 + > drivers/staging/media/imx/TODO | 17 + > drivers/staging/media/imx/imx-ic-common.c | 113 + > drivers/staging/media/imx/imx-ic-prp.c | 497 +++++ > drivers/staging/media/imx/imx-ic-prpencvf.c | 1236 +++++++++++ > drivers/staging/media/imx/imx-ic.h | 38 + > drivers/staging/media/imx/imx-media-capture.c | 694 ++++++ > drivers/staging/media/imx/imx-media-csi.c | 1595 ++++++++++++++ > drivers/staging/media/imx/imx-media-dev.c | 522 +++++ > drivers/staging/media/imx/imx-media-fim.c | 463 ++++ > drivers/staging/media/imx/imx-media-internal-sd.c | 349 +++ > drivers/staging/media/imx/imx-media-of.c | 267 +++ > drivers/staging/media/imx/imx-media-utils.c | 1009 +++++++++ > drivers/staging/media/imx/imx-media-vdic.c | 949 +++++++++ > drivers/staging/media/imx/imx-media.h | 311 +++ > drivers/staging/media/imx/imx6-mipi-csi2.c | 725 +++++++ > include/media/imx.h | 15 + > include/media/v4l2-mc.h | 25 + > include/media/v4l2-subdev.h | 10 + > include/uapi/Kbuild | 1 + > include/uapi/linux/media.h | 6 + > include/uapi/linux/v4l2-controls.h | 4 + > include/uapi/linux/videodev2.h | 2 + > include/uapi/media/Kbuild | 2 + > include/uapi/media/imx.h | 21 + > 54 files changed, 13262 insertions(+), 27 deletions(-) > create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5640.txt > create mode 100644 Documentation/devicetree/bindings/media/imx.txt > create mode 100644 Documentation/devicetree/bindings/media/video-multiplexer.txt > create mode 100644 Documentation/media/v4l-drivers/imx.rst > create mode 100644 drivers/media/i2c/ov5640.c > create mode 100644 drivers/media/platform/video-multiplexer.c > create mode 100644 drivers/staging/media/imx/Kconfig > create mode 100644 drivers/staging/media/imx/Makefile > create mode 100644 drivers/staging/media/imx/TODO > create mode 100644 drivers/staging/media/imx/imx-ic-common.c > create mode 100644 drivers/staging/media/imx/imx-ic-prp.c > create mode 100644 drivers/staging/media/imx/imx-ic-prpencvf.c > create mode 100644 drivers/staging/media/imx/imx-ic.h > create mode 100644 drivers/staging/media/imx/imx-media-capture.c > create mode 100644 drivers/staging/media/imx/imx-media-csi.c > create mode 100644 drivers/staging/media/imx/imx-media-dev.c > create mode 100644 drivers/staging/media/imx/imx-media-fim.c > create mode 100644 drivers/staging/media/imx/imx-media-internal-sd.c > create mode 100644 drivers/staging/media/imx/imx-media-of.c > create mode 100644 drivers/staging/media/imx/imx-media-utils.c > create mode 100644 drivers/staging/media/imx/imx-media-vdic.c > create mode 100644 drivers/staging/media/imx/imx-media.h > create mode 100644 drivers/staging/media/imx/imx6-mipi-csi2.c > create mode 100644 include/media/imx.h > create mode 100644 include/uapi/media/Kbuild > create mode 100644 include/uapi/media/imx.h > > -- > 2.7.4 > -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net.
