Hi Hans,
Thanks for the review!
On 09-03-2017 12:29, Hans Verkuil wrote:
> On 07/03/17 17:48, Jose Abreu wrote:
>> HDMI Receivers receive video modes which, according to
>> CEA specification, can have different frames per second
>> (fps) values.
>>
>> This patch introduces a helper function in the media core
>> which can calculate the expected video mode fps given the
>> pixel clock value and the horizontal/vertical values. HDMI
>> video receiver drivers are expected to use this helper so
>> that they can correctly fill the v4l2_streamparm structure
>> which is requested by vidioc_g_parm callback.
>>
>> We could also use a lookup table for this but it wouldn't
>> correctly handle 60Hz vs 59.94Hz situations as this all
>> depends on the pixel clock value.
>>
>> Signed-off-by: Jose Abreu <joabreu@xxxxxxxxxxxx>
>> Cc: Carlos Palminha <palminha@xxxxxxxxxxxx>
>> Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
>> Cc: Hans Verkuil <hans.verkuil@xxxxxxxxx>
>> Cc: Charles-Antoine Couret <charles-antoine.couret@xxxxxxxxxxxx>
>> Cc: linux-media@xxxxxxxxxxxxxxx
>> Cc: linux-kernel@xxxxxxxxxxxxxxx
>> ---
>> drivers/media/v4l2-core/v4l2-dv-timings.c | 29 +++++++++++++++++++++++++++++
>> include/media/v4l2-dv-timings.h | 8 ++++++++
>> 2 files changed, 37 insertions(+)
>>
>> diff --git a/drivers/media/v4l2-core/v4l2-dv-timings.c b/drivers/media/v4l2-core/v4l2-dv-timings.c
>> index 5c8c49d..19946c6 100644
>> --- a/drivers/media/v4l2-core/v4l2-dv-timings.c
>> +++ b/drivers/media/v4l2-core/v4l2-dv-timings.c
>> @@ -814,3 +814,32 @@ struct v4l2_fract v4l2_calc_aspect_ratio(u8 hor_landscape, u8 vert_portrait)
>> return aspect;
>> }
>> EXPORT_SYMBOL_GPL(v4l2_calc_aspect_ratio);
>> +
>> +struct v4l2_fract v4l2_calc_fps(const struct v4l2_dv_timings *t)
>> +{
>> + const struct v4l2_bt_timings *bt = &t->bt;
>> + struct v4l2_fract fps_fract = { 1, 1 };
>> + unsigned long n, d;
>> + unsigned long mask = GENMASK(BITS_PER_LONG - 1, 0);
> This is wrong since v4l2_fract uses u32, and LONG can be 64 bits.
Yes, its wrong. I will remove the variable and just use fps, 100
instead of mask, mask.
>
>> + u32 htot, vtot, fps;
>> + u64 pclk;
>> +
>> + if (t->type != V4L2_DV_BT_656_1120)
>> + return fps_fract;
>> +
>> + htot = V4L2_DV_BT_FRAME_WIDTH(bt);
>> + vtot = V4L2_DV_BT_FRAME_HEIGHT(bt);
>> + pclk = bt->pixelclock;
>> + if (bt->interlaced)
>> + htot /= 2;
> This can be dropped. This is the timeperframe, not timeperfield. So for interleaved
> formats the time is that of two fields (aka one frame).
Ok, but then there is something not correct in
v4l2_dv_timings_presets structure field values because I get
wrong results in double clocked modes. I checked the definition
and the modes that are double clocked are defined with half the
clock, i.e., V4L2_DV_BT_CEA_720X480I59_94 is defined with a pixel
clock of 13.5MHz but in CEA spec this mode is defined with pixel
clock of 27MHz.
>
>> +
>> + fps = (htot * vtot) > 0 ? div_u64((100 * pclk), (htot * vtot)) : 0;
>> +
>> + rational_best_approximation(fps, 100, mask, mask, &n, &d);
> I think you can just use fps, 100 instead of mask, mask.
>
> What is returned if fps == 0?
I will add a check for this.
>
> I don't have a problem as such with this function, but just be aware that the
> pixelclock is never precise: there are HDMI receivers that are unable to report
> the pixelclock with enough precision to even detect if it is 60 vs 59.94 Hz.
>
> And even for those that can, it is often not reliable.
My initial intention for this function was that it should be used
with v4l2_find_dv_timings_cea861_vic, when possible. That is,
HDMI receivers have access to AVI infoframe contents. Then they
should get the vic, call v4l2_find_dv_timings_cea861_vic, get
timings and then call v4l2_calc_fps to get fps. If no AVI
infoframe is available then it should resort to pixel clock and
H/V measures as last resort.
>
> In order for me to merge this it also should be used in a driver. Actually the
> cobalt and vivid drivers would be suitable: you can test the vivid driver yourself,
> and if you have a patch for the cobalt driver, then I can test that for you.
>
> Would be nice for the cobalt driver, since g_parm always returns 60 fps :-)
Ok, I will check what I can do :)
Best regards,
Jose Miguel Abreu
>
> Regards,
>
> Hans
>
>> +
>> + fps_fract.numerator = d;
>> + fps_fract.denominator = n;
>> + return fps_fract;
>> +}
>> +EXPORT_SYMBOL_GPL(v4l2_calc_fps);
>> +
>> diff --git a/include/media/v4l2-dv-timings.h b/include/media/v4l2-dv-timings.h
>> index 61a1889..d23b168 100644
>> --- a/include/media/v4l2-dv-timings.h
>> +++ b/include/media/v4l2-dv-timings.h
>> @@ -196,6 +196,14 @@ bool v4l2_detect_gtf(unsigned frame_height, unsigned hfreq, unsigned vsync,
>> struct v4l2_fract v4l2_calc_aspect_ratio(u8 hor_landscape, u8 vert_portrait);
>>
>> /**
>> + * v4l2_calc_fps - calculate the frames per seconds based on the
>> + * v4l2_dv_timings information.
>> + *
>> + * @t: the timings data.
>> + */
>> +struct v4l2_fract v4l2_calc_fps(const struct v4l2_dv_timings *t);
>> +
>> +/**
>> * v4l2_dv_timings_aspect_ratio - calculate the aspect ratio based on the
>> * v4l2_dv_timings information.
>> *
>>
