Using Mygica T230 <2016 model on (Arch) Linux 4.9.11 with latest openelec-firmware installed.: [ 1950.636574] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 1950.770804] usb 1-1: language id specifier not provided by device, defaulting to English [ 1950.773837] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state. [ 1950.909942] dvb-usb: recv bulk message failed: -11 [ 1951.016674] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1951.016920] DVB: registering new adapter (Mygica T230 DVB-T/T2/C) [ 1951.021056] dvb-usb: recv bulk message failed: -11 [ 1951.021071] si2168: probe of 10-0064 failed with error -121 [ 1951.021077] dvb-usb: no frontend was attached by 'Mygica T230 DVB-T/T2/C' [ 1951.021316] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/input/input29 [ 1951.021687] dvb-usb: schedule remote query interval to 100 msecs. Working state on Linux 4.8.14: [ 7999.575183] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 7999.575233] DVB: registering new adapter (Mygica T230 DVB-T/T2/C) [ 7999.583571] i2c i2c-5: Added multiplexed i2c bus 6 [ 7999.583573] si2168 5-0064: Silicon Labs Si2168-B40 successfully identified [ 7999.583574] si2168 5-0064: firmware version: B 4.0.2 [ 7999.585032] media: Linux media interface: v0.10 [ 7999.587312] si2157 6-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 7999.587317] usb 1-7: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 7999.587453] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-7/input/input16 [ 7999.587529] dvb-usb: schedule remote query interval to 100 msecs. [ 7999.587563] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected. [ 7999.587578] usbcore: registered new interface driver dvb_usb_cxusb [ 8006.865027] si2168 5-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 8007.577512] si2168 5-0064: firmware version: B 4.0.11 [ 8007.591030] si2157 6-0060: found a 'Silicon Labs Si2158-A20' [ 8007.591587] si2157 6-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw' [ 8008.793732] si2157 6-0060: firmware version: 2.1.9 The latest released model (with serial 2016) doesn't start at all on Linux 4.9.11. I don't know if this is because of the module changes in si2168 or other changes in dvb-usb. Thanks and let me know if more info is needed.
