Re: [PATCH 5/6] mx31moboard: camera support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sascha Hauer wrote:
On Mon, Oct 19, 2009 at 06:41:13PM +0200, Valentin Longchamp wrote:
Hi Guennadi,

Guennadi Liakhovetski wrote:
Hi

On Thu, 15 Oct 2009, Valentin Longchamp wrote:

We have two mt9t031 cameras that have a muxed bus on the robot.
We can control which one we are using with gpio outputs. This
currently is not optimal
So, what prevents you from registering two platform devices for your two cameras? Is there a problem with that?
The lack of time until now to do it properly. I sent those patches as initial RFC (and by the way thanks for your comment).

I would like to have one video interface only and that I can switch between the two physical camera using a quite simple system call. Would that be compatible with registering the two platform devices ?

Wouldn't it be better to have /dev/video[01] for two cameras? How do
keep the registers synchron between both cameras otherwise?


Well, from my experimentations, most initializations are done when you open the device. So if you close the device, switch camera and open it again, the registers are initialized with the need values. Of course there is a problem is you switch camera while the device is open.

It could be ok with /dev/video[01], but I would need something that would prevent one device to be opened when the other already is open (a mutex, but where ?).

Besides, I have read a slide from Dongsoo Kim (http://www.celinuxforum.org/CelfPubWiki/ELC2009Presentations?action=AttachFile&do=get&target=Framework_for_digital_camera_in_linux-in_detail.ppt slides 41-47) and the cleanest solution would be to have the two chips enumerated with VIDIOC_ENUMINPUT as proposed. What would then be the v4l2 call to switch from one device to each other ? How to "link" it with the kernel code that make the real hardware switching ?

Thanks for your inputs.

Val

--
Valentin Longchamp, PhD Student, EPFL-STI-LSRO1
valentin.longchamp@xxxxxxx, Phone: +41216937827
http://people.epfl.ch/valentin.longchamp
MEA3485, Station 9, CH-1015 Lausanne
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux