Hi Ulrich, On Thursday 20 Oct 2016 10:49:11 Simon Horman wrote: > On Tue, Oct 18, 2016 at 05:02:20PM +0200, Ulrich Hecht wrote: > > Hi! > > > > This is a by-the-datasheet implementation of analog and digital video > > input on the Gose board. > > > > I have tried to address all concerns raised by reviewers, with the > > exception of the composite input patch, which has been left as is for > > now. > > > > CU > > Uli > > > > > > Changes since v1: > > - r8a7793.dtsi: added VIN2 > > - modeled HDMI decoder input/output and connector > > - added "renesas,rcar-gen2-vin" compat strings > > - removed unnecessary "remote" node and aliases > > - set ADV7612 interrupt to GP4_2 > > > > Ulrich Hecht (3): > > ARM: dts: r8a7793: Enable VIN0-VIN2 > > I have queued up the above patch with Laurent and Geert's tags. > > > ARM: dts: gose: add HDMI input > > ARM: dts: gose: add composite video input > > Please address the review of the above two patches and repost. Could you please do so ? Feedback on 2/3 should be easy to handle. For 3/3, you might need to ping the DT maintainers. > > arch/arm/boot/dts/r8a7793-gose.dts | 100 +++++++++++++++++++++++++++++++ > > arch/arm/boot/dts/r8a7793.dtsi | 27 ++++++++++ > > 2 files changed, 127 insertions(+) -- Regards, Laurent Pinchart
