As platform data isn't supported anymore, there's no reason to maintain a
separate header under include/. Merge its contents to the one under
drivers/media/i2c/smiapp.
Signed-off-by: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
---
MAINTAINERS | 1 -
drivers/media/i2c/smiapp/smiapp.h | 49 +++++++++++++++++++++++-
include/media/i2c/smiapp.h | 78 ---------------------------------------
3 files changed, 48 insertions(+), 80 deletions(-)
delete mode 100644 include/media/i2c/smiapp.h
diff --git a/MAINTAINERS b/MAINTAINERS
index cfff2c9..869196d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11416,7 +11416,6 @@ M: Sakari Ailus <sakari.ailus@xxxxxx>
L: linux-media@xxxxxxxxxxxxxxx
S: Maintained
F: drivers/media/i2c/smiapp/
-F: include/media/i2c/smiapp.h
F: drivers/media/i2c/smiapp-pll.c
F: drivers/media/i2c/smiapp-pll.h
F: include/uapi/linux/smiapp.h
diff --git a/drivers/media/i2c/smiapp/smiapp.h b/drivers/media/i2c/smiapp/smiapp.h
index f74d695..5ed37af 100644
--- a/drivers/media/i2c/smiapp/smiapp.h
+++ b/drivers/media/i2c/smiapp/smiapp.h
@@ -22,13 +22,21 @@
#include <linux/mutex.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-subdev.h>
-#include <media/i2c/smiapp.h>
#include "smiapp-pll.h"
#include "smiapp-reg.h"
#include "smiapp-regs.h"
#include "smiapp-quirk.h"
+#define SMIAPP_NAME "smiapp"
+
+#define SMIAPP_DFL_I2C_ADDR (0x20 >> 1) /* Default I2C Address */
+#define SMIAPP_ALT_I2C_ADDR (0x6e >> 1) /* Alternate I2C Address */
+
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK 0
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE 1
+#define SMIAPP_CSI_SIGNALLING_MODE_CSI2 2
+
/*
* Standard SMIA++ constants
*/
@@ -54,6 +62,45 @@
struct smiapp_quirk;
+/*
+ * Sometimes due to board layout considerations the camera module can be
+ * mounted rotated. The typical rotation used is 180 degrees which can be
+ * corrected by giving a default H-FLIP and V-FLIP in the sensor readout.
+ * FIXME: rotation also changes the bayer pattern.
+ */
+enum smiapp_module_board_orient {
+ SMIAPP_MODULE_BOARD_ORIENT_0 = 0,
+ SMIAPP_MODULE_BOARD_ORIENT_180,
+};
+
+struct smiapp_flash_strobe_parms {
+ u8 mode;
+ u32 strobe_width_high_us;
+ u16 strobe_delay;
+ u16 stobe_start_point;
+ u8 trigger;
+};
+
+struct smiapp_hwconfig {
+ /*
+ * Change the cci address if i2c_addr_alt is set.
+ * Both default and alternate cci addr need to be present
+ */
+ unsigned short i2c_addr_dfl; /* Default i2c addr */
+ unsigned short i2c_addr_alt; /* Alternate i2c addr */
+
+ uint32_t nvm_size; /* bytes */
+ uint32_t ext_clk; /* sensor external clk */
+
+ unsigned int lanes; /* Number of CSI-2 lanes */
+ uint32_t csi_signalling_mode; /* SMIAPP_CSI_SIGNALLING_MODE_* */
+ uint64_t *op_sys_clock;
+
+ enum smiapp_module_board_orient module_board_orient;
+
+ struct smiapp_flash_strobe_parms *strobe_setup;
+};
+
#define SMIAPP_MODULE_IDENT_FLAG_REV_LE (1 << 0)
struct smiapp_module_ident {
diff --git a/include/media/i2c/smiapp.h b/include/media/i2c/smiapp.h
deleted file mode 100644
index 635007e..0000000
--- a/include/media/i2c/smiapp.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/media/i2c/smiapp.h
- *
- * Generic driver for SMIA/SMIA++ compliant camera modules
- *
- * Copyright (C) 2011--2012 Nokia Corporation
- * Contact: Sakari Ailus <sakari.ailus@xxxxxx>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __SMIAPP_H_
-#define __SMIAPP_H_
-
-#include <media/v4l2-subdev.h>
-
-#define SMIAPP_NAME "smiapp"
-
-#define SMIAPP_DFL_I2C_ADDR (0x20 >> 1) /* Default I2C Address */
-#define SMIAPP_ALT_I2C_ADDR (0x6e >> 1) /* Alternate I2C Address */
-
-#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK 0
-#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE 1
-#define SMIAPP_CSI_SIGNALLING_MODE_CSI2 2
-
-/*
- * Sometimes due to board layout considerations the camera module can be
- * mounted rotated. The typical rotation used is 180 degrees which can be
- * corrected by giving a default H-FLIP and V-FLIP in the sensor readout.
- * FIXME: rotation also changes the bayer pattern.
- */
-enum smiapp_module_board_orient {
- SMIAPP_MODULE_BOARD_ORIENT_0 = 0,
- SMIAPP_MODULE_BOARD_ORIENT_180,
-};
-
-struct smiapp_flash_strobe_parms {
- u8 mode;
- u32 strobe_width_high_us;
- u16 strobe_delay;
- u16 stobe_start_point;
- u8 trigger;
-};
-
-struct smiapp_hwconfig {
- /*
- * Change the cci address if i2c_addr_alt is set.
- * Both default and alternate cci addr need to be present
- */
- unsigned short i2c_addr_dfl; /* Default i2c addr */
- unsigned short i2c_addr_alt; /* Alternate i2c addr */
-
- uint32_t nvm_size; /* bytes */
- uint32_t ext_clk; /* sensor external clk */
-
- unsigned int lanes; /* Number of CSI-2 lanes */
- uint32_t csi_signalling_mode; /* SMIAPP_CSI_SIGNALLING_MODE_* */
- uint64_t *op_sys_clock;
-
- enum smiapp_module_board_orient module_board_orient;
-
- struct smiapp_flash_strobe_parms *strobe_setup;
-};
-
-#endif /* __SMIAPP_H_ */
--
2.1.4
