Add binding document for Venus video encoder/decoder driver
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
---
Changes since previous v5:
* dropped rproc phandle (remoteproc is not used anymore)
* added subnodes paragraph with descrition of three subnodes:
- video-decoder and video-encoder - describes decoder (core0) and
encoder (core1) power-domains and clocks (applicable for msm8996
Venus core).
- video-firmware - needed to get reserved memory region where the
firmware is stored.
.../devicetree/bindings/media/qcom,venus.txt | 112 +++++++++++++++++++++
1 file changed, 112 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/qcom,venus.txt
diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt
new file mode 100644
index 000000000000..4427af3ca5a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,venus.txt
@@ -0,0 +1,112 @@
+* Qualcomm Venus video encode/decode accelerator
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Value should contain one of:
+ - "qcom,msm8916-venus"
+ - "qcom,msm8996-venus"
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Register base address and length of the register map.
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Should contain interrupt line number.
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A List of phandle and clock specifier pairs as listed
+ in clock-names property.
+- clock-names:
+ Usage: required for msm8916
+ Value type: <stringlist>
+ Definition: Should contain the following entries:
+ - "core" Core video accelerator clock
+ - "iface" Video accelerator AHB clock
+ - "bus" Video accelerator AXI clock
+- clock-names:
+ Usage: required for msm8996
+ Value type: <stringlist>
+ Definition: Should contain the following entries:
+ - "core" Core video accelerator clock
+ - "iface" Video accelerator AHB clock
+ - "bus" Video accelerator AXI clock
+ - "mbus" Video MAXI clock
+- power-domains:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A phandle and power domain specifier pairs to the
+ power domain which is responsible for collapsing
+ and restoring power to the peripheral.
+- iommus:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A list of phandle and IOMMU specifier pairs.
+
+* Subnodes
+The Venus node must contain three subnodes representing video-decoder,
+video-encoder and video-firmware.
+
+Every of video-encoder or video-decoder subnode should have:
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Value should contain "venus-decoder" or "venus-encoder"
+- clocks:
+ Usage: required for msm8996
+ Value type: <prop-encoded-array>
+ Definition: A List of phandle and clock specifier pairs as listed
+ in clock-names property.
+- clock-names:
+ Usage: required for msm8996
+ Value type: <stringlist>
+ Definition: Should contain the following entries:
+ - "core" Subcore video accelerator clock
+
+- power-domains:
+ Usage: required for msm8996
+ Value type: <prop-encoded-array>
+ Definition: A phandle and power domain specifier pairs to the
+ power domain which is responsible for collapsing
+ and restoring power to the subcore.
+
+The video-firmware subnode should contain:
+
+- memory-region:
+ Usage: required
+ Value type: <phandle>
+ Definition: reference to the reserved-memory for the memory region
+
+* An Example
+ video-codec@1d00000 {
+ compatible = "qcom,msm8916-venus";
+ reg = <0x01d00000 0xff000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+ <&gcc GCC_VENUS0_AHB_CLK>,
+ <&gcc GCC_VENUS0_AXI_CLK>;
+ clock-names = "core", "iface", "bus";
+ power-domains = <&gcc VENUS_GDSC>;
+ iommus = <&apps_iommu 5>;
+
+ video-decoder {
+ compatible = "venus-decoder";
+ clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+ clock-names = "core";
+ power-domains = <&mmcc VENUS_CORE0_GDSC>;
+ };
+
+ video-encoder {
+ compatible = "venus-encoder";
+ clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+ clock-names = "core";
+ power-domains = <&mmcc VENUS_CORE1_GDSC>;
+ };
+
+ video-firmware {
+ memory-region = <&venus_mem>;
+ };
+ };
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
