Hi,
Just to point it here - there is one more one-line correction needed below:
On 11/14/2016 12:24 PM, Todor Tomov wrote:
> The ov5645 sensor from Omnivision supports up to 2592x1944
> and CSI2 interface.
>
> The driver adds support for the following modes:
> - 1280x960
> - 1920x1080
> - 2592x1944
>
> Output format is packed 8bit UYVY.
>
> Signed-off-by: Todor Tomov <todor.tomov@xxxxxxxxxx>
> ---
> drivers/media/i2c/Kconfig | 12 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/ov5645.c | 1352 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 1365 insertions(+)
> create mode 100644 drivers/media/i2c/ov5645.c
>
<snip>
> diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
> new file mode 100644
> index 0000000..2b33bc6
> --- /dev/null
> +++ b/drivers/media/i2c/ov5645.c
> @@ -0,0 +1,1352 @@
<snip>
> +static int ov5645_entity_init_cfg(struct v4l2_subdev *subdev,
> + struct v4l2_subdev_pad_config *cfg)
> +{
> + struct v4l2_subdev_format fmt = { 0 };
> + struct ov5645 *ov5645 = to_ov5645(subdev);
This variable is unused and should be removed.
> +
> + fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
> + fmt.format.width = 1920;
> + fmt.format.height = 1080;
> +
> + ov5645_set_format(subdev, cfg, &fmt);
> +
> + return 0;
> +}
<snip>
--
Best regards,
Todor Tomov
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
