Hi Steve, I have just tested the imx-media-staging-md-wip branch on a Nitrogen6X with a tc358743 (BD_HDMI_MIPI HDMI to MIPI CSI-2 receiver board). Some observations: # Link pipeline media-ctl -l "'tc358743 1-000f':0->'imx6-mipi-csi2':0[1]" media-ctl -l "'imx6-mipi-csi2':1->'ipu1_csi0_mux':0[1]" media-ctl -l "'ipu1_csi0_mux':2->'ipu1_csi0':0[1]" media-ctl -l "'ipu1_csi0':2->'ipu1_csi0 capture':0[1]" # Provide an EDID to the HDMI source v4l2-ctl -d /dev/v4l-subdev2 --set-edid=file=edid-1080p.hex # At this point the HDMI source is enabled and sends a 1080p60 signal # Configure detected DV timings media-ctl --set-dv "'tc358743 1-000f':0" # Set pad formats media-ctl --set-v4l2 "'tc358743 1-000f':0[fmt:UYVY/1920x1080]" media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/1920x1080]" media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/1920x1080]" media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/1920x1080]" v4l2-ctl -d /dev/video4 -V # This still is configured to 640x480, which is inconsistent with # the 'ipu1_csi0':2 pad format. The pad set_fmt above should # have set this, too. v4l2-ctl --list-formats -d /dev/video4 # This lists all the RGB formats, which it shouldn't. There is # no CSC in this pipeline, so we should be limited to YUV formats # only. # Set capture format v4l2-ctl -d /dev/video4 -v width=1920,height=1080,pixelformat=UYVY v4l2-ctl -d /dev/video4 -V # Now the capture format is correctly configured to 1920x1080. v4l2-ctl -d 4 --list-frameintervals=width=1920,height=1080,pixelformat=UYVY # This lists nothing. We should at least provide the 'ipu1_csi0':2 pad # frame interval. In the future this should list fractions achievable # via frame skipping. v4l2-compliance -d /dev/video4 # This fails two tests: # fail: v4l2-test-input-output.cpp(383): std == 0 # fail: v4l2-test-input-output.cpp(449): invalid attributes for input 0 # test VIDIOC_G/S/ENUMINPUT: FAIL # and # fail: v4l2-test-controls.cpp(782): subscribe event for control 'User Controls' failed # test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL # (Slowly) stream JPEG images to a display host: gst-launch-1.0 -v v4l2src device=/dev/video4 ! jpegenc ! rtpjpegpay ! udpsink I've done this a few times, and sometimes I only get a "ipu1_csi0: EOF timeout" message when starting streaming. regards Philipp -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
