Hi,
This is the latest incarnation of R-Car MIPI CSI-2 receiver driver. It's
based on top of v4.10-rc1 and are tested on Renesas Salvator-X together
with the out of tree patches for rcar-vin to add support for Gen3 VIN
and a prototype driver for ADV7482. If anyone is interested to test
video grabbing using these out of tree patches please see [1].
Changes since v4:
- Match SoC part numbers and drop trailing space in documentation,
thanks Geert for pointing this out.
- Clarify that the driver is a CSI-2 receiver by supervised
s/interface/receiver/, thanks Laurent.
- Add entries in Kconfig and Makefile alphabetically instead of append.
- Rename struct rcar_csi2 member swap to lane_swap.
- Remove macros to wrap calls to dev_{dbg,info,warn,err}.
- Add wrappers for ioread32 and iowrite32.
- Remove unused interrupt handler, but keep checking in probe that there
are a interrupt define in DT.
- Rework how to wait for LP-11 state, thanks Laurent for the great idea!
- Remove unneeded delay in rcar_csi2_reset()
- Remove check for duplicated lane id:s from DT parsing. Broken out to a
separate patch adding this check directly to v4l2_of_parse_endpoint().
- Fixed rcar_csi2_start() to ask it's source subdevice for information
about pixel rate and frame format. With this change having
{set,get}_fmt operations became redundant, it was only used for
figuring out this out so dropped them.
- Tabulated frequency settings map.
- Dropped V4L2_SUBDEV_FL_HAS_DEVNODE it should never have been set.
- Switched from MEDIA_ENT_F_ATV_DECODER to
MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER as entity function. I can't
find a more suitable function, and what the hardware do is to fetch
video from an external chip and passes it on to a another SoC internal
IP it's sort of a formatter.
- Break out DT documentation and code in two patches.
Changes since v3:
- Update DT binding documentation with input from Geert Uytterhoeven,
thanks!
Changes since v2:
- Added media control pads as this is needed by the new rcar-vin driver.
- Update DT bindings after review comments and to add r8a7796 support.
- Add get_fmt handler.
- Fix media bus format error s/YUYV8/UYVY8/
Changes since v1:
- Drop dependency on a pad aware s_stream operation.
- Use the DT bindings format "renesas,<soctype>-<device>", thanks Geert
for pointing this out.
1. http://elinux.org/R-Car/Tests:rcar-vin
Niklas Söderlund (2):
media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
.../devicetree/bindings/media/rcar-csi2.txt | 116 ++++
drivers/media/platform/rcar-vin/Kconfig | 11 +
drivers/media/platform/rcar-vin/Makefile | 1 +
drivers/media/platform/rcar-vin/rcar-csi2.c | 616 +++++++++++++++++++++
4 files changed, 744 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/rcar-csi2.txt
create mode 100644 drivers/media/platform/rcar-vin/rcar-csi2.c
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
