On 01/03/2017 10:57 PM, Steve Longerbeam wrote:
> This is a set of three media entity subdevice drivers for the i.MX
> Image Converter. The i.MX IC module contains three independent
> "tasks":
>
> - Pre-processing Encode task: video frames are routed directly from
> the CSI and can be scaled, color-space converted, and rotated.
> Scaled output is limited to 1024x1024 resolution. Output frames
> are routed to the camera interface entities (camif).
>
> - Pre-processing Viewfinder task: this task can perform the same
> conversions as the pre-process encode task, but in addition can
> be used for hardware motion compensated deinterlacing. Frames can
> come either directly from the CSI or from the SMFC entities (memory
> buffers via IDMAC channels). Scaled output is limited to 1024x1024
> resolution. Output frames can be routed to various sinks including
> the post-processing task entities.
>
> - Post-processing task: same conversions as pre-process encode. However
> this entity sends frames to the i.MX IPU image converter which supports
> image tiling, which allows scaled output up to 4096x4096 resolution.
> Output frames can be routed to the camera interfaces.
>
> Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
> ---
[snip]
> +static int imx_ic_probe(struct platform_device *pdev)
> +{
> + struct imx_media_internal_sd_platformdata *pdata;
> + struct imx_ic_priv *priv;
> + int ret;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, &priv->sd);
> + priv->dev = &pdev->dev;
> +
> + /* get our ipu_id, grp_id and IC task id */
> + pdata = priv->dev->platform_data;
> + priv->ipu_id = pdata->ipu_id;
> + switch (pdata->grp_id) {
> + case IMX_MEDIA_GRP_ID_IC_PRPENC:
> + priv->task_id = IC_TASK_ENCODER;
> + break;
> + case IMX_MEDIA_GRP_ID_IC_PRPVF:
> + priv->task_id = IC_TASK_VIEWFINDER;
> + break;
> + case IMX_MEDIA_GRP_ID_IC_PP0...IMX_MEDIA_GRP_ID_IC_PP3:
> + priv->task_id = IC_TASK_POST_PROCESSOR;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + v4l2_subdev_init(&priv->sd, ic_ops[priv->task_id]->subdev_ops);
> + v4l2_set_subdevdata(&priv->sd, priv);
> + priv->sd.internal_ops = ic_ops[priv->task_id]->internal_ops;
> + priv->sd.entity.ops = ic_ops[priv->task_id]->entity_ops;
> + priv->sd.entity.function = MEDIA_ENT_F_PROC_VIDEO_SCALER;
> + priv->sd.dev = &pdev->dev;
> + priv->sd.owner = THIS_MODULE;
> + priv->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
> + priv->sd.grp_id = pdata->grp_id;
> + strncpy(priv->sd.name, pdata->sd_name, sizeof(priv->sd.name));
> +
> + ret = ic_ops[priv->task_id]->init(priv);
> + if (ret)
> + return ret;
> +
> + ret = v4l2_async_register_subdev(&priv->sd);
> + if (ret)
> + goto remove;
> +
> + return 0;
> +remove:
> + ic_ops[priv->task_id]->remove(priv);
> + return ret;
if (ret)
ic_ops[priv->task_id]->remove(priv);
return ret;
as an alternative.
[snip]
> +static const struct platform_device_id imx_ic_ids[] = {
> + { .name = "imx-ipuv3-ic" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(platform, imx_ic_ids);
> +
> +static struct platform_driver imx_ic_driver = {
> + .probe = imx_ic_probe,
> + .remove = imx_ic_remove,
> + .id_table = imx_ic_ids,
> + .driver = {
> + .name = "imx-ipuv3-ic",
> + .owner = THIS_MODULE,
Please drop .owner assignment.
> + },
> +};
> +module_platform_driver(imx_ic_driver);
> +
> +MODULE_DESCRIPTION("i.MX IC subdev driver");
> +MODULE_AUTHOR("Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:imx-ipuv3-ic");
> diff --git a/drivers/staging/media/imx/imx-ic-pp.c b/drivers/staging/media/imx/imx-ic-pp.c
> new file mode 100644
> index 0000000..5ef0581
> --- /dev/null
> +++ b/drivers/staging/media/imx/imx-ic-pp.c
> @@ -0,0 +1,636 @@
> +/*
> + * V4L2 IC Post-Processor Subdev for Freescale i.MX5/6 SOC
> + *
> + * Copyright (c) 2014-2016 Mentor Graphics Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/fs.h>
> +#include <linux/timer.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/videobuf2-dma-contig.h>
> +#include <media/v4l2-subdev.h>
> +#include <media/v4l2-of.h>
> +#include <media/v4l2-ctrls.h>
Please sort the list of headers alphabetically.
> +#include <media/imx.h>
> +#include <video/imx-ipu-image-convert.h>
> +#include "imx-media.h"
> +#include "imx-ic.h"
> +
[snip]
> +
> +static int pp_start(struct pp_priv *priv)
> +{
> + struct imx_ic_priv *ic_priv = priv->ic_priv;
> + struct ipu_image image_in, image_out;
> + const struct imx_media_pixfmt *incc;
> + struct v4l2_mbus_framefmt *infmt;
> + int i, in_size, ret;
> +
> + /* ask the sink for the buffer ring */
> + ret = v4l2_subdev_call(priv->sink_sd, core, ioctl,
> + IMX_MEDIA_REQ_DMA_BUF_SINK_RING,
> + &priv->out_ring);
> + if (ret)
> + return ret;
> +
> + imx_media_mbus_fmt_to_ipu_image(&image_in,
> + &priv->format_mbus[priv->input_pad]);
> + imx_media_mbus_fmt_to_ipu_image(&image_out,
> + &priv->format_mbus[priv->output_pad]);
> +
> + priv->ipu = priv->md->ipu[ic_priv->ipu_id];
> + priv->ic_ctx = ipu_image_convert_prepare(priv->ipu,
> + IC_TASK_POST_PROCESSOR,
> + &image_in, &image_out,
> + priv->rot_mode,
> + pp_convert_complete, priv);
> + if (IS_ERR(priv->ic_ctx))
> + return PTR_ERR(priv->ic_ctx);
> +
> + infmt = &priv->format_mbus[priv->input_pad];
> + incc = priv->cc[priv->input_pad];
> + in_size = (infmt->width * incc->bpp * infmt->height) >> 3;
> +
> + if (priv->in_ring) {
> + v4l2_warn(&ic_priv->sd, "%s: dma-buf ring was not freed\n",
> + __func__);
> + imx_media_free_dma_buf_ring(priv->in_ring);
> + }
> +
> + priv->in_ring = imx_media_alloc_dma_buf_ring(priv->md,
> + &priv->src_sd->entity,
> + &ic_priv->sd.entity,
> + in_size,
> + IMX_MEDIA_MIN_RING_BUFS,
> + true);
> + if (IS_ERR(priv->in_ring)) {
> + v4l2_err(&ic_priv->sd,
> + "failed to alloc dma-buf ring\n");
> + ret = PTR_ERR(priv->in_ring);
> + priv->in_ring = NULL;
> + goto out_unprep;
> + }
> +
> + for (i = 0; i < IMX_MEDIA_MIN_RING_BUFS; i++)
> + imx_media_dma_buf_queue(priv->in_ring, i);
> +
> + priv->out_run = kzalloc(IMX_MEDIA_MAX_RING_BUFS *
> + sizeof(*priv->out_run), GFP_KERNEL);
> + if (!priv->out_run) {
> + v4l2_err(&ic_priv->sd, "failed to alloc src ring runs\n");
In OOM situation the core will report it, probably you can drop the message.
> + ret = -ENOMEM;
> + goto out_free_ring;
> + }
> +
> + priv->stop = false;
> +
> + return 0;
> +
> +out_free_ring:
> + imx_media_free_dma_buf_ring(priv->in_ring);
> + priv->in_ring = NULL;
> +out_unprep:
> + ipu_image_convert_unprepare(priv->ic_ctx);
> + return ret;
> +}
> +
[snip]
> diff --git a/drivers/staging/media/imx/imx-ic-prpenc.c b/drivers/staging/media/imx/imx-ic-prpenc.c
> new file mode 100644
> index 0000000..e17216b
> --- /dev/null
> +++ b/drivers/staging/media/imx/imx-ic-prpenc.c
> @@ -0,0 +1,1037 @@
> +/*
> + * V4L2 Capture IC Encoder Subdev for Freescale i.MX5/6 SOC
> + *
> + * This subdevice handles capture of video frames from the CSI, which
> + * are routed directly to the Image Converter preprocess encode task,
> + * for resizing, colorspace conversion, and rotation.
> + *
> + * Copyright (c) 2012-2016 Mentor Graphics Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/fs.h>
> +#include <linux/timer.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/spinlock.h>
> +#include <linux/platform_device.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/videobuf2-dma-contig.h>
> +#include <media/v4l2-subdev.h>
> +#include <media/v4l2-of.h>
> +#include <media/v4l2-ctrls.h>
Please sort the list of headers alphabetically.
> +#include <media/imx.h>
> +#include "imx-media.h"
> +#include "imx-ic.h"
> +
[snip]
> +static irqreturn_t prpenc_eof_interrupt(int irq, void *dev_id)
> +{
> + struct prpenc_priv *priv = dev_id;
> + struct imx_media_dma_buf *done, *next;
> + struct ipuv3_channel *channel;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&priv->irqlock, flags);
Here spin_lock(&priv->irqlock) should be sufficient.
> +
> + if (priv->last_eof) {
> + complete(&priv->last_eof_comp);
> + priv->last_eof = false;
> + goto unlock;
> + }
> +
> + /* inform CSI of this EOF so it can monitor frame intervals */
> + v4l2_subdev_call(priv->src_sd, core, interrupt_service_routine,
> + 0, NULL);
> +
> + channel = (ipu_rot_mode_is_irt(priv->rot_mode)) ?
> + priv->enc_rot_out_ch : priv->enc_ch;
> +
> + done = imx_media_dma_buf_get_active(priv->out_ring);
> + /* give the completed buffer to the sink */
> + if (!WARN_ON(!done))
> + imx_media_dma_buf_done(done, IMX_MEDIA_BUF_STATUS_DONE);
> +
> + /* priv->next buffer is now the active one */
> + imx_media_dma_buf_set_active(priv->next);
> +
> + /* bump the EOF timeout timer */
> + mod_timer(&priv->eof_timeout_timer,
> + jiffies + msecs_to_jiffies(IMX_MEDIA_EOF_TIMEOUT));
> +
> + if (ipu_idmac_buffer_is_ready(channel, priv->ipu_buf_num))
> + ipu_idmac_clear_buffer(channel, priv->ipu_buf_num);
> +
> + /* get next queued buffer */
> + next = imx_media_dma_buf_get_next_queued(priv->out_ring);
> +
> + ipu_cpmem_set_buffer(channel, priv->ipu_buf_num, next->phys);
> + ipu_idmac_select_buffer(channel, priv->ipu_buf_num);
> +
> + /* toggle IPU double-buffer index */
> + priv->ipu_buf_num ^= 1;
> + priv->next = next;
> +
> +unlock:
> + spin_unlock_irqrestore(&priv->irqlock, flags);
> + return IRQ_HANDLED;
> +}
[snip]
> +static int prpenc_registered(struct v4l2_subdev *sd)
> +{
> + struct prpenc_priv *priv = sd_to_priv(sd);
> + struct imx_media_subdev *imxsd;
> + struct imx_media_pad *pad;
> + int i, ret;
> +
> + /* get media device */
> + priv->md = dev_get_drvdata(sd->v4l2_dev->dev);
> +
> + imxsd = imx_media_find_subdev_by_sd(priv->md, sd);
> + if (IS_ERR(imxsd))
> + return PTR_ERR(imxsd);
> +
> + if (imxsd->num_sink_pads != 1 || imxsd->num_src_pads != 1)
> + return -EINVAL;
> +
> + for (i = 0; i < PRPENC_NUM_PADS; i++) {
> + pad = &imxsd->pad[i];
> + priv->pad[i] = pad->pad;
> + if (priv->pad[i].flags & MEDIA_PAD_FL_SINK)
> + priv->input_pad = i;
> + else
> + priv->output_pad = i;
> +
> + /* set a default mbus format */
> + ret = imx_media_init_mbus_fmt(&priv->format_mbus[i],
> + 640, 480, 0, V4L2_FIELD_NONE,
> + &priv->cc[i]);
> + if (ret)
> + return ret;
> + }
> +
> + ret = prpenc_init_controls(priv);
> + if (ret)
> + return ret;
> +
> + ret = media_entity_pads_init(&sd->entity, PRPENC_NUM_PADS, priv->pad);
> + if (ret)
> + goto free_ctrls;
> +
> + return 0;
> +free_ctrls:
> + v4l2_ctrl_handler_free(&priv->ctrl_hdlr);
> + return ret;
if (ret)
v4l2_ctrl_handler_free(&priv->ctrl_hdlr);
return ret;
version is shorter.
> +}
[snip]
> diff --git a/drivers/staging/media/imx/imx-ic-prpvf.c b/drivers/staging/media/imx/imx-ic-prpvf.c
> new file mode 100644
> index 0000000..53ce006
> --- /dev/null
> +++ b/drivers/staging/media/imx/imx-ic-prpvf.c
> @@ -0,0 +1,1180 @@
> +/*
> + * V4L2 IC Deinterlacer Subdev for Freescale i.MX5/6 SOC
> + *
> + * Copyright (c) 2014-2016 Mentor Graphics Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/fs.h>
> +#include <linux/timer.h>
> +#include <linux/sched.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/videobuf2-dma-contig.h>
> +#include <media/v4l2-subdev.h>
> +#include <media/v4l2-of.h>
> +#include <media/v4l2-ctrls.h>
Please sort the list of headers alphabetically.
> +#include <media/imx.h>
> +#include "imx-media.h"
> +#include "imx-ic.h"
> +
> +/*
[snip]
> +/* prpvf_out_ch EOF interrupt (progressive frame ready) */
> +static irqreturn_t prpvf_out_eof_interrupt(int irq, void *dev_id)
> +{
> + struct prpvf_priv *priv = dev_id;
> + struct imx_media_dma_buf *done;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&priv->irqlock, flags);
Here spin_lock(&priv->irqlock) should be sufficient.
> +
> + if (priv->last_eof) {
> + complete(&priv->last_eof_comp);
> + priv->last_eof = false;
> + goto unlock;
> + }
> +
> + if (priv->csi_direct) {
> + /* inform CSI of this EOF so it can monitor frame intervals */
> + /* FIXME: frames are coming in twice as fast in direct path! */
> + v4l2_subdev_call(priv->src_sd, core, interrupt_service_routine,
> + 0, NULL);
> + }
> +
> + done = imx_media_dma_buf_get_active(priv->out_ring);
> + /* give the completed buffer to the sink */
> + if (!WARN_ON(!done))
> + imx_media_dma_buf_done(done, IMX_MEDIA_BUF_STATUS_DONE);
> +
> + if (!priv->csi_direct) {
> + /* we're done with the input buffer, queue it back */
> + imx_media_dma_buf_queue(priv->in_ring,
> + priv->curr_in_buf->index);
> +
> + /* current input buffer is now last */
> + priv->last_in_buf = priv->curr_in_buf;
> + } else {
> + /*
> + * priv->next buffer is now the active one due
> + * to IPU double-buffering
> + */
> + imx_media_dma_buf_set_active(priv->next_out_buf);
> + }
> +
> + /* bump the EOF timeout timer */
> + mod_timer(&priv->eof_timeout_timer,
> + jiffies + msecs_to_jiffies(IMX_MEDIA_EOF_TIMEOUT));
> +
> + if (priv->csi_direct) {
> + prepare_prpvf_out_buffer(priv);
> + /* toggle IPU double-buffer index */
> + priv->ipu_buf_num ^= 1;
> + }
> +
> +unlock:
> + spin_unlock_irqrestore(&priv->irqlock, flags);
> + return IRQ_HANDLED;
> +}
> +
[snip]
> diff --git a/drivers/staging/media/imx/imx-ic.h b/drivers/staging/media/imx/imx-ic.h
> new file mode 100644
> index 0000000..9aed5f5
> --- /dev/null
> +++ b/drivers/staging/media/imx/imx-ic.h
> @@ -0,0 +1,36 @@
> +/*
> + * V4L2 Image Converter Subdev for Freescale i.MX5/6 SOC
> + *
> + * Copyright (c) 2016 Mentor Graphics Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +#ifndef _IMX_IC_H
> +#define _IMX_IC_H
> +
Please add header files or declarations of all used structs.
> +struct imx_ic_priv {
> + struct device *dev;
> + struct v4l2_subdev sd;
> + int ipu_id;
> + int task_id;
> + void *task_priv;
> +};
> +
> +struct imx_ic_ops {
> + struct v4l2_subdev_ops *subdev_ops;
> + struct v4l2_subdev_internal_ops *internal_ops;
> + struct media_entity_operations *entity_ops;
> +
> + int (*init)(struct imx_ic_priv *ic_priv);
> + void (*remove)(struct imx_ic_priv *ic_priv);
> +};
> +
> +extern struct imx_ic_ops imx_ic_prpenc_ops;
> +extern struct imx_ic_ops imx_ic_prpvf_ops;
> +extern struct imx_ic_ops imx_ic_pp_ops;
> +
> +#endif
> +
>
--
With best wishes,
Vladimir
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
