Re: [PATCH 2/2] rainshadow-cec: new RainShadow Tech HDMI CEC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Hans,

On Thu, Dec 15, 2016 at 02:02:07PM +0100, Hans Verkuil wrote:
> From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
> 
> This driver supports the RainShadow Tech USB HDMI CEC adapter.
> 
> See: http://rainshadowtech.com/HdmiCecUsb.html
> 
> Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
> ---
>  MAINTAINERS                                       |   7 +
>  drivers/media/usb/Kconfig                         |   1 +
>  drivers/media/usb/Makefile                        |   1 +
>  drivers/media/usb/rainshadow-cec/Kconfig          |  10 +
>  drivers/media/usb/rainshadow-cec/Makefile         |   1 +
>  drivers/media/usb/rainshadow-cec/rainshadow-cec.c | 344 ++++++++++++++++++++++
>  6 files changed, 364 insertions(+)
>  create mode 100644 drivers/media/usb/rainshadow-cec/Kconfig
>  create mode 100644 drivers/media/usb/rainshadow-cec/Makefile
>  create mode 100644 drivers/media/usb/rainshadow-cec/rainshadow-cec.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 52cc077..78ebc5d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10069,6 +10069,13 @@ L:	linux-fbdev@xxxxxxxxxxxxxxx
>  S:	Maintained
>  F:	drivers/video/fbdev/aty/aty128fb.c
>  
> +RAINSHADOW-CEC DRIVER
> +M:	Hans Verkuil <hverkuil@xxxxxxxxx>
> +L:	linux-media@xxxxxxxxxxxxxxx
> +T:	git git://linuxtv.org/media_tree.git
> +S:	Maintained
> +F:	drivers/media/usb/rainshadow-cec/*
> +
>  RALINK MIPS ARCHITECTURE
>  M:	John Crispin <john@xxxxxxxxxxx>
>  L:	linux-mips@xxxxxxxxxxxxxx
> diff --git a/drivers/media/usb/Kconfig b/drivers/media/usb/Kconfig
> index c9644b6..b24e753 100644
> --- a/drivers/media/usb/Kconfig
> +++ b/drivers/media/usb/Kconfig
> @@ -63,6 +63,7 @@ endif
>  if MEDIA_CEC_SUPPORT
>  	comment "USB HDMI CEC adapters"
>  source "drivers/media/usb/pulse8-cec/Kconfig"
> +source "drivers/media/usb/rainshadow-cec/Kconfig"
>  endif
>  
>  endif #MEDIA_USB_SUPPORT
> diff --git a/drivers/media/usb/Makefile b/drivers/media/usb/Makefile
> index 0f15e33..738b993 100644
> --- a/drivers/media/usb/Makefile
> +++ b/drivers/media/usb/Makefile
> @@ -25,3 +25,4 @@ obj-$(CONFIG_VIDEO_USBTV) += usbtv/
>  obj-$(CONFIG_VIDEO_GO7007) += go7007/
>  obj-$(CONFIG_DVB_AS102) += as102/
>  obj-$(CONFIG_USB_PULSE8_CEC) += pulse8-cec/
> +obj-$(CONFIG_USB_RAINSHADOW_CEC) += rainshadow-cec/
> diff --git a/drivers/media/usb/rainshadow-cec/Kconfig b/drivers/media/usb/rainshadow-cec/Kconfig
> new file mode 100644
> index 0000000..447291b
> --- /dev/null
> +++ b/drivers/media/usb/rainshadow-cec/Kconfig
> @@ -0,0 +1,10 @@
> +config USB_RAINSHADOW_CEC
> +	tristate "RainShadow Tech HDMI CEC"
> +	depends on USB_ACM && MEDIA_CEC_SUPPORT
> +	select SERIO
> +	select SERIO_SERPORT
> +	---help---
> +	  This is a cec driver for the RainShadow Tech HDMI CEC device.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called rainshadow-cec.
> diff --git a/drivers/media/usb/rainshadow-cec/Makefile b/drivers/media/usb/rainshadow-cec/Makefile
> new file mode 100644
> index 0000000..a79fbc7
> --- /dev/null
> +++ b/drivers/media/usb/rainshadow-cec/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_USB_RAINSHADOW_CEC) += rainshadow-cec.o
> diff --git a/drivers/media/usb/rainshadow-cec/rainshadow-cec.c b/drivers/media/usb/rainshadow-cec/rainshadow-cec.c
> new file mode 100644
> index 0000000..dc7f287
> --- /dev/null
> +++ b/drivers/media/usb/rainshadow-cec/rainshadow-cec.c
> @@ -0,0 +1,344 @@
> +/*
> + * RainShadow Tech HDMI CEC driver
> + *
> + * Copyright 2016 Hans Verkuil <hverkuil@xxxxxxxxx
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version of 2 of the License, or (at your
> + * option) any later version. See the file COPYING in the main directory of
> + * this archive for more details.
> + */
> +
> +/*
> + * Notes:
> + *
> + * The higher level protocols are currently disabled. This can be added
> + * later, similar to how this is done for the Pulse Eight CEC driver.
> + *
> + * Documentation of the protocol is available here:
> + *
> + * http://rainshadowtech.com/doc/HDMICECtoUSBandRS232v2.0.pdf
> + */
> +
> +#include <linux/completion.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/workqueue.h>
> +#include <linux/serio.h>
> +#include <linux/slab.h>
> +#include <linux/time.h>
> +#include <linux/delay.h>
> +#include <linux/ctype.h>
> +
> +#include <media/cec.h>
> +
> +MODULE_AUTHOR("Hans Verkuil <hverkuil@xxxxxxxxx>");
> +MODULE_DESCRIPTION("RainShadow Tech HDMI CEC driver");
> +MODULE_LICENSE("GPL");
> +
> +static int debug;
> +module_param(debug, int, 0644);
> +MODULE_PARM_DESC(debug, "debug level (0-1)");
> +
> +#define DATA_SIZE 256
> +
> +struct rain {
> +	struct device *dev;
> +	struct serio *serio;
> +	struct cec_adapter *adap;
> +	struct completion cmd_done;
> +	struct work_struct work;
> +	struct cec_msg rx_msg;
> +	char data[DATA_SIZE];
> +	char buf[DATA_SIZE];
> +	unsigned int idx;
> +	bool started;
> +	struct mutex write_lock;
> +};
> +
> +static void rain_irq_work_handler(struct work_struct *work)
> +{
> +	struct rain *rain =
> +		container_of(work, struct rain, work);
> +	struct cec_msg *msg = &rain->rx_msg;
> +	const char *data = rain->data + 3;
> +	int stat = -1;
> +
> +	msg->len = 0;
> +	for (; *data; data++) {
> +		if (!isxdigit(*data))
> +			continue;
> +		if (isxdigit(data[0]) && isxdigit(data[1])) {
> +			if (msg->len == CEC_MAX_MSG_SIZE)
> +				break;
> +			hex2bin(msg->msg + msg->len, data, 2);
> +			msg->len++;
> +			data++;
> +			continue;
> +		}
> +		if (!data[1])
> +			stat = hex_to_bin(data[0]);
> +		break;
> +	}
> +
> +	if (rain->data[0] == 'R') {
> +		if (stat == 1 || stat == 2)
> +			cec_received_msg(rain->adap, msg);
> +		return;
> +	}
> +
> +	switch (stat) {
> +	case 1:
> +		cec_transmit_done(rain->adap, CEC_TX_STATUS_OK,
> +				  0, 0, 0, 0);
> +		break;
> +	case 2:
> +		cec_transmit_done(rain->adap, CEC_TX_STATUS_NACK,
> +				  0, 1, 0, 0);
> +		break;
> +	default:
> +		cec_transmit_done(rain->adap, CEC_TX_STATUS_LOW_DRIVE,
> +				  0, 0, 0, 1);
> +		break;
> +	}
> +}
> +
> +static irqreturn_t rain_interrupt(struct serio *serio, unsigned char data,
> +				    unsigned int flags)
> +{
> +	struct rain *rain = serio_get_drvdata(serio);
> +
> +	if (!rain->started && data != '?')
> +		return IRQ_HANDLED;
> +	if (data == '\r') {
> +		rain->buf[rain->idx] = '\0';
> +		if (debug)
> +			dev_info(rain->dev, "received: %s\n", rain->buf);

Just dev_dbg() please. I think everyone is using dynamic debug.

> +		strcpy(rain->data, rain->buf);
> +		if (!memcmp(rain->data, "REC", 3) ||
> +		    !memcmp(rain->data, "STA", 3))
> +			schedule_work(&rain->work);
> +		else
> +			complete(&rain->cmd_done);
> +		rain->idx = 0;
> +		rain->started = false;
> +		return IRQ_HANDLED;

This relies on work to complete before you receive the next message,
which is not always the case as far as I can understand.

> +	} else if (data == '?') {
> +		rain->idx = 0;
> +		rain->started = true;
> +		return IRQ_HANDLED;
> +	}
> +
> +	if (data == '\n') {

Should it be a "switch (data) {" ?

> +		rain->idx = 0;
> +		rain->started = false;
> +		return IRQ_HANDLED;
> +	}
> +	if (rain->idx >= DATA_SIZE - 1) {
> +		dev_dbg(rain->dev,
> +			"throwing away %d bytes of garbage\n", rain->idx);
> +		rain->idx = 0;
> +	}
> +	rain->buf[rain->idx++] = data;
> +	return IRQ_HANDLED;
> +}
> +
> +static void rain_disconnect(struct serio *serio)
> +{
> +	struct rain *rain = serio_get_drvdata(serio);
> +
> +	cec_unregister_adapter(rain->adap);
> +	dev_info(&serio->dev, "disconnected\n");
> +	serio_close(serio);
> +	serio_set_drvdata(serio, NULL);
> +	kfree(rain);
> +}
> +
> +static int rain_send(struct rain *rain, const char *command)
> +{
> +	int err = serio_write(rain->serio, '!');
> +
> +	if (debug)
> +		dev_info(rain->dev, "send: %s\n", command);
> +	while (!err && *command)
> +		err = serio_write(rain->serio, *command++);
> +	if (!err)
> +		err = serio_write(rain->serio, '~');
> +
> +	return err;
> +}
> +
> +static int rain_send_and_wait(struct rain *rain,
> +			      const char *cmd, const char *reply)
> +{
> +	int err;
> +
> +	init_completion(&rain->cmd_done);
> +
> +	mutex_lock(&rain->write_lock);
> +	err = rain_send(rain, cmd);
> +	if (err)
> +		goto err;
> +
> +	if (!wait_for_completion_timeout(&rain->cmd_done, HZ)) {
> +		err = -ETIMEDOUT;
> +		goto err;
> +	}
> +	if (reply && strncmp(rain->data, reply, strlen(reply))) {
> +		if (debug)
> +			dev_info(rain->dev,
> +				 "transmit of '%s': received '%s' instead of '%s'\n",
> +				 cmd, rain->data, reply);
> +		err = -EIO;
> +	}
> +err:
> +	mutex_unlock(&rain->write_lock);
> +	return err;
> +}
> +
> +static int rain_setup(struct rain *rain, struct serio *serio,
> +			struct cec_log_addrs *log_addrs, u16 *pa)
> +{
> +	u16 res;
> +	int err;
> +
> +	err = rain_send_and_wait(rain, "R", "REV");
> +	if (err)
> +		return err;
> +	dev_info(rain->dev, "Firmware version %s\n", rain->data + 4);
> +
> +	err = rain_send_and_wait(rain, "Q 1", "QTY");
> +	if (err)
> +		return err;
> +	err = rain_send_and_wait(rain, "c0000", "CFG");
> +	if (err)
> +		return err;
> +	return rain_send_and_wait(rain, "A F 0000", "ADR");

Given that this is instantiated via serport + inputattach the setup
sequence should be done in inputattach, not kernel.

> +}
> +
> +static int rain_cec_adap_enable(struct cec_adapter *adap, bool enable)
> +{
> +	return 0;
> +}
> +
> +static int rain_cec_adap_log_addr(struct cec_adapter *adap, u8 log_addr)
> +{
> +	struct rain *rain = adap->priv;
> +	u8 cmd[16];
> +
> +	if (log_addr == CEC_LOG_ADDR_INVALID)
> +		log_addr = CEC_LOG_ADDR_UNREGISTERED;
> +	snprintf(cmd, sizeof(cmd), "A %x", log_addr);
> +	return rain_send_and_wait(rain, cmd, "ADR");
> +}
> +
> +static int rain_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
> +				    u32 signal_free_time, struct cec_msg *msg)
> +{
> +	struct rain *rain = adap->priv;
> +	char cmd[2 * CEC_MAX_MSG_SIZE + 16];
> +	unsigned int i;
> +	int err;
> +
> +	if (msg->len == 1) {
> +		snprintf(cmd, sizeof(cmd), "x%x", cec_msg_destination(msg));
> +	} else {
> +		char hex[3];
> +
> +		snprintf(cmd, sizeof(cmd), "x%x %02x ",
> +			 cec_msg_destination(msg), msg->msg[1]);
> +		for (i = 2; i < msg->len; i++) {
> +			snprintf(hex, sizeof(hex), "%02x", msg->msg[i]);
> +			strncat(cmd, hex, sizeof(cmd));
> +		}
> +	}
> +	mutex_lock(&rain->write_lock);
> +	err = rain_send(rain, cmd);
> +	mutex_unlock(&rain->write_lock);
> +	return err;
> +}
> +
> +static const struct cec_adap_ops rain_cec_adap_ops = {
> +	.adap_enable = rain_cec_adap_enable,
> +	.adap_log_addr = rain_cec_adap_log_addr,
> +	.adap_transmit = rain_cec_adap_transmit,
> +};
> +
> +static int rain_connect(struct serio *serio, struct serio_driver *drv)
> +{
> +	u32 caps = CEC_CAP_TRANSMIT | CEC_CAP_LOG_ADDRS | CEC_CAP_PHYS_ADDR |
> +		CEC_CAP_PASSTHROUGH | CEC_CAP_RC | CEC_CAP_MONITOR_ALL;
> +	struct rain *rain;
> +	int err = -ENOMEM;
> +	struct cec_log_addrs log_addrs = {};
> +	u16 pa = CEC_PHYS_ADDR_INVALID;
> +
> +	rain = kzalloc(sizeof(*rain), GFP_KERNEL);
> +
> +	if (!rain)
> +		return -ENOMEM;
> +
> +	rain->serio = serio;
> +	rain->adap = cec_allocate_adapter(&rain_cec_adap_ops, rain,
> +		"HDMI CEC", caps, 1);
> +	err = PTR_ERR_OR_ZERO(rain->adap);
> +	if (err < 0)
> +		goto free_device;
> +
> +	rain->dev = &serio->dev;
> +	serio_set_drvdata(serio, rain);
> +	INIT_WORK(&rain->work, rain_irq_work_handler);
> +	mutex_init(&rain->write_lock);
> +
> +	err = serio_open(serio, drv);
> +	if (err)
> +		goto delete_adap;
> +
> +	err = rain_setup(rain, serio, &log_addrs, &pa);
> +	if (err)
> +		goto close_serio;
> +
> +	err = cec_register_adapter(rain->adap, &serio->dev);
> +	if (err < 0)
> +		goto close_serio;
> +
> +	rain->dev = &rain->adap->devnode.dev;
> +	return 0;
> +
> +close_serio:
> +	serio_close(serio);
> +delete_adap:
> +	cec_delete_adapter(rain->adap);
> +	serio_set_drvdata(serio, NULL);
> +free_device:
> +	kfree(rain);
> +	return err;
> +}
> +
> +static struct serio_device_id rain_serio_ids[] = {
> +	{
> +		.type	= SERIO_RS232,
> +		.proto	= SERIO_RAINSHADOW_CEC,
> +		.id	= SERIO_ANY,
> +		.extra	= SERIO_ANY,
> +	},
> +	{ 0 }
> +};
> +
> +MODULE_DEVICE_TABLE(serio, rain_serio_ids);
> +
> +static struct serio_driver rain_drv = {
> +	.driver		= {
> +		.name	= "rainshadow-cec",
> +	},
> +	.description	= "RainShadow Tech HDMI CEC driver",
> +	.id_table	= rain_serio_ids,
> +	.interrupt	= rain_interrupt,
> +	.connect	= rain_connect,
> +	.disconnect	= rain_disconnect,
> +};
> +
> +module_serio_driver(rain_drv);
> -- 
> 2.10.2
> 

Thanks.

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux