Hi all, I'm working on support in the em8xx module for the Hauppauge WinTV dualhd atsc/qam usb stick. I'vey got the first tuner+fe working so far, but would appreciate any suggestions/feedback on the items below. the device has: 2x LGDT3306A frontend 2x si2157 tuner (1) since the tuner sits behind the front end, I initially had the front end configured to use the i2c gate control but this wasn't enough because the tuner would send commands on a timer without knowing that the gate had to be opened. I added an i2c_driver to the lgdt3306a module using an i2c_mux and it solved the problem but the lgdt3306a module now has two ways to initialize -- through _attach and through (i2c) _probe. Is this the correct approach? (2) The second front end + tuner registers ok but doesn't work quite right. Tuning works but it doesn't seem like the stream is passing through... I noticed that em28xx_capture_start in em28xx-core.c is hardcoded to only use the first transport stream but when i tested changing it to only enable TS2, that didn't work either. I'm guessing there is something else in the code that's assuming only the first transport stream is used. Anyone have an idea of what I'm missing? Thanks, -Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
