Hello, I have some problems with DVB-T tuning under s2-api/DVB API 5 To run these tests I use scan-s2-7effc68db255 My machine runs the following kernel (uname -a) Linux fixe_barcelone 2.6.31-13-generic #42-Ubuntu SMP Thu Oct 8 20:03:54 UTC 2009 x86_64 GNU/Linux And I own 3 DVB-T devices : 1: 01:00.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) Subsystem: Technotrend Systemtechnik GmbH Device 1012 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at fa6ffc00 (32-bit, non-prefetchable) [size=512] Kernel driver in use: budget_ci dvb Kernel modules: budget-ci 2: Bus 001 Device 010: ID 2040:7070 Hauppauge 3: Bus 001 Device 011: ID 07ca:a815 AVerMedia Technologies, Inc. All three devices tune well and work flawlessly with scan (dvb api v3) But when I use scan-s2, only the AVerMedia is able to lock I use the dvb-t/es-Collserola as an initial tuning file. I thought the S2API shouldn't change the tuning behavior. I tried to search the Mailing list archives via google I unfortunately found nothing. I'm sorry if this subject was discussed before. What can I do to investigate more on this issue ? PS : I join the debug output for the sucessful and unsucessful tuning Thanks -- Brice A: Yes. >Q: Are you sure? >>A: Because it reverses the logical flow of conversation. >>>Q: Why is top posting annoying in email?
Oct 12 13:02:28 fixe_barcelone kernel: [228614.407730] DiB7000P: setting output mode for demod ffff880139055000 to 0 Oct 12 13:02:28 fixe_barcelone kernel: [228614.416623] DiB0070: Tuning for Band: 2 (514000 kHz) Oct 12 13:02:28 fixe_barcelone kernel: [228614.448106] DiB0070: HFDIV code: 5 Oct 12 13:02:28 fixe_barcelone kernel: [228614.448112] DiB0070: VCO = 1 Oct 12 13:02:28 fixe_barcelone kernel: [228614.448115] DiB0070: VCOF in kHz: 6168000 ((6*514000) << 1)) Oct 12 13:02:28 fixe_barcelone kernel: [228614.448120] DiB0070: REFDIV: 1, FREF: 12000 Oct 12 13:02:28 fixe_barcelone kernel: [228614.448124] DiB0070: FBDIV: 85, Rest: 43520 Oct 12 13:02:28 fixe_barcelone kernel: [228614.448127] DiB0070: Num: -22016, Den: 255, SD: 1 Oct 12 13:02:28 fixe_barcelone kernel: [228614.513606] DiB0070: CAPTRIM=64; ADC = 905 (ADC) & 1590mV Oct 12 13:02:28 fixe_barcelone kernel: [228614.513613] DiB0070: CAPTRIM=64 is closer to target (505/3000) Oct 12 13:02:28 fixe_barcelone kernel: [228614.534355] DiB0070: CAPTRIM=32; ADC = 35 (ADC) & 61mV Oct 12 13:02:28 fixe_barcelone kernel: [228614.534362] DiB0070: CAPTRIM=32 is closer to target (365/505) Oct 12 13:02:28 fixe_barcelone kernel: [228614.554356] DiB0070: CAPTRIM=48; ADC = 34 (ADC) & 59mV Oct 12 13:02:28 fixe_barcelone kernel: [228614.574981] DiB0070: CAPTRIM=56; ADC = 141 (ADC) & 247mV Oct 12 13:02:28 fixe_barcelone kernel: [228614.574988] DiB0070: CAPTRIM=56 is closer to target (259/365) Oct 12 13:02:28 fixe_barcelone kernel: [228614.594356] DiB0070: CAPTRIM=60; ADC = 285 (ADC) & 500mV Oct 12 13:02:28 fixe_barcelone kernel: [228614.594363] DiB0070: CAPTRIM=60 is closer to target (115/259) Oct 12 13:02:28 fixe_barcelone kernel: [228614.614357] DiB0070: CAPTRIM=62; ADC = 420 (ADC) & 738mV Oct 12 13:02:28 fixe_barcelone kernel: [228614.614364] DiB0070: CAPTRIM=62 is closer to target (20/115) Oct 12 13:02:28 fixe_barcelone kernel: [228614.634484] DiB0070: CAPTRIM=61; ADC = 343 (ADC) & 602mV Oct 12 13:02:29 fixe_barcelone kernel: [228614.759111] DiB7000P: SPLIT ffff880139055000: 176 Oct 12 13:02:29 fixe_barcelone kernel: [228614.790742] DiB7000P: using default timf Oct 12 13:02:29 fixe_barcelone kernel: [228615.090748] DiB7000P: updated timf_frequency: 20452445 (default: 20452225) Oct 12 13:02:29 fixe_barcelone kernel: [228615.090756] DiB7000P: relative position of the Spur: 2000k (RF: 514000k, XTAL: 12000k) Oct 12 13:02:29 fixe_barcelone kernel: [228615.091871] DiB7000P: PALF COEF: 0 re: 25 im: 124 Oct 12 13:02:29 fixe_barcelone kernel: [228615.095246] DiB7000P: PALF COEF: 1 re: -103 im: 43 Oct 12 13:02:29 fixe_barcelone kernel: [228615.098618] DiB7000P: PALF COEF: 2 re: -52 im: -79 Oct 12 13:02:29 fixe_barcelone kernel: [228615.101995] DiB7000P: PALF COEF: 3 re: 54 im: -53 Oct 12 13:02:29 fixe_barcelone kernel: [228615.105368] DiB7000P: PALF COEF: 4 re: 45 im: 30 Oct 12 13:02:29 fixe_barcelone kernel: [228615.108745] DiB7000P: PALF COEF: 5 re: -11 im: 28 Oct 12 13:02:29 fixe_barcelone kernel: [228615.112995] DiB7000P: PALF COEF: 6 re: -5 im: 0 Oct 12 13:02:29 fixe_barcelone kernel: [228615.116373] DiB7000P: PALF COEF: 7 re: 0 im: 19 Oct 12 13:02:29 fixe_barcelone kernel: [228615.120871] DiB7000P: using updated timf Oct 12 13:02:29 fixe_barcelone kernel: [228615.124493] DiB7000P: setting output mode for demod ffff880139055000 to 5 Oct 12 13:02:29 fixe_barcelone kernel: [228615.129290] function : dvb_dmxdev_filter_set Oct 12 13:02:29 fixe_barcelone kernel: [228615.129514] function : dvb_dmxdev_filter_set
Oct 12 13:01:55 fixe_barcelone kernel: [228581.408427] DiB7000P: setting output mode for demod ffff880139055000 to 0 Oct 12 13:01:55 fixe_barcelone kernel: [228581.420136] DiB0070: Tuning for Band: 2 (514000 kHz) Oct 12 13:01:55 fixe_barcelone kernel: [228581.452538] DiB0070: HFDIV code: 5 Oct 12 13:01:55 fixe_barcelone kernel: [228581.452544] DiB0070: VCO = 1 Oct 12 13:01:55 fixe_barcelone kernel: [228581.452547] DiB0070: VCOF in kHz: 6168000 ((6*514000) << 1)) Oct 12 13:01:55 fixe_barcelone kernel: [228581.452552] DiB0070: REFDIV: 1, FREF: 12000 Oct 12 13:01:55 fixe_barcelone kernel: [228581.452595] DiB0070: FBDIV: 85, Rest: 43520 Oct 12 13:01:55 fixe_barcelone kernel: [228581.452598] DiB0070: Num: -22016, Den: 255, SD: 1 Oct 12 13:01:55 fixe_barcelone kernel: [228581.513539] DiB0070: CAPTRIM=64; ADC = 876 (ADC) & 1539mV Oct 12 13:01:55 fixe_barcelone kernel: [228581.513547] DiB0070: CAPTRIM=64 is closer to target (476/3000) Oct 12 13:01:55 fixe_barcelone kernel: [228581.533539] DiB0070: CAPTRIM=32; ADC = 34 (ADC) & 59mV Oct 12 13:01:55 fixe_barcelone kernel: [228581.533545] DiB0070: CAPTRIM=32 is closer to target (366/476) Oct 12 13:01:55 fixe_barcelone kernel: [228581.553667] DiB0070: CAPTRIM=48; ADC = 34 (ADC) & 59mV Oct 12 13:01:55 fixe_barcelone kernel: [228581.573540] DiB0070: CAPTRIM=56; ADC = 139 (ADC) & 244mV Oct 12 13:01:55 fixe_barcelone kernel: [228581.573547] DiB0070: CAPTRIM=56 is closer to target (261/366) Oct 12 13:01:55 fixe_barcelone kernel: [228581.593541] DiB0070: CAPTRIM=60; ADC = 282 (ADC) & 495mV Oct 12 13:01:55 fixe_barcelone kernel: [228581.593548] DiB0070: CAPTRIM=60 is closer to target (118/261) Oct 12 13:01:55 fixe_barcelone kernel: [228581.613543] DiB0070: CAPTRIM=62; ADC = 413 (ADC) & 725mV Oct 12 13:01:55 fixe_barcelone kernel: [228581.613550] DiB0070: CAPTRIM=62 is closer to target (13/118) Oct 12 13:01:55 fixe_barcelone kernel: [228581.633542] DiB0070: CAPTRIM=61; ADC = 338 (ADC) & 594mV Oct 12 13:01:56 fixe_barcelone kernel: [228581.688424] DiB7000P: WBD: ref: 1058, sel: 1, active: 1, alpha: 1 Oct 12 13:01:56 fixe_barcelone kernel: [228581.778420] DiB7000P: SPLIT ffff880139055000: 166 Oct 12 13:01:56 fixe_barcelone kernel: [228581.810017] DiB7000P: using default timf Oct 12 13:01:56 fixe_barcelone kernel: [228582.130784] DiB7000P: relative position of the Spur: 2000k (RF: 514000k, XTAL: 12000k) Oct 12 13:01:56 fixe_barcelone kernel: [228582.138635] DiB7000P: PALF COEF: 0 re: 25 im: 124 Oct 12 13:01:56 fixe_barcelone kernel: [228582.160035] DiB7000P: PALF COEF: 1 re: -103 im: 43 Oct 12 13:01:56 fixe_barcelone kernel: [228582.163459] DiB7000P: PALF COEF: 2 re: -52 im: -79 Oct 12 13:01:56 fixe_barcelone kernel: [228582.172306] DiB7000P: PALF COEF: 3 re: 54 im: -53 Oct 12 13:01:56 fixe_barcelone kernel: [228582.175733] DiB7000P: PALF COEF: 4 re: 45 im: 30 Oct 12 13:01:56 fixe_barcelone kernel: [228582.191187] DiB7000P: PALF COEF: 5 re: -11 im: 28 Oct 12 13:01:56 fixe_barcelone kernel: [228582.194625] DiB7000P: PALF COEF: 6 re: -5 im: 0 Oct 12 13:01:56 fixe_barcelone kernel: [228582.220038] DiB7000P: PALF COEF: 7 re: 0 im: 19 Oct 12 13:01:56 fixe_barcelone kernel: [228582.229129] DiB7000P: using default timf Oct 12 13:01:56 fixe_barcelone kernel: [228582.232943] DiB7000P: setting output mode for demod ffff880139055000 to 5 Oct 12 13:01:57 fixe_barcelone kernel: [228583.232833] DiB7000P: setting output mode for demod ffff880139055000 to 0
