Hello to everyone, I bought a Dazzle TV Hybrid USB stick some years ago (2006 maybe?) and until now I've used out of kernel drivers from M. Rechberger. Here's a webpage about the stick http://www.lelong.com.my/Auc/List/2009-10DeStd44780009_AUCTION_-# Dazzle-TV-Hybrid-USB-stick-Watch-TV-without-Internet-BID-Now.htm (this line has been breaked at the sharp # sign) The usbid is eb1a:2881. The Linux distribution I'm using, Archlinux, has updated the kernel to 2.6.31.3 and I've failed to patch the out of kernel drivers again, so I've tried the in kernel em28xx modules. These are the results: when I plug the stick em28xx and em28xx-dvb get loaded by the kernel, I think the stick is recognized as card=53 (Pinnacle Hybrid Pro), and the /dev/videoX, /dev/dspX, /dev/vbiX and /dev/dvb/adapterX devices are created. But analog TV has no audio (I've tried sox/arecord-aplay), teletext doesn't work (mtt segfaults) and DVB doesn't work too. With me-tv I get an error message like "Failed to tune to channel" and sometimes a "timeout". Searching this mailing list I've found a way to get at least DVB working (thanks to Emanuele Deiola) 1) remove em28xx-dvb and em28xx modules if these are already loaded; 2) plug the stick (the kernel loads em28xx and em28xx-dvb); 3) remove em28xx-dvb and em28xx modules # modprobe -r em28xx-dvb # modprobe -r em28xx 4) load em28xx with card=11 # modprobe em28xx card=11 and DVB works, i.e. me-tv, vlc, w_scan work as expected. Analog TV is still without audio, video is OK. I've tried to add the option card=11 in modprobe.conf but the result is that the /dev/dvb/adapterX directory is not created. I hope this is helpful for other people with this stick and to the developers to enhance support for the stick. Please developers let me know if you need more info. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html