I have two comments (and the same two comments apply to the video encoder patch
as well):
On 12/01/2016 10:03 AM, Stanimir Varbanov wrote:
> This consists of video decoder implementation plus decoder
> controls.
>
> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
> ---
> drivers/media/platform/qcom/venus/vdec.c | 976 +++++++++++++++++++++++++
> drivers/media/platform/qcom/venus/vdec.h | 32 +
> drivers/media/platform/qcom/venus/vdec_ctrls.c | 149 ++++
> 3 files changed, 1157 insertions(+)
> create mode 100644 drivers/media/platform/qcom/venus/vdec.c
> create mode 100644 drivers/media/platform/qcom/venus/vdec.h
> create mode 100644 drivers/media/platform/qcom/venus/vdec_ctrls.c
>
> diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c
> new file mode 100644
> index 000000000000..9f585a1e0ff1
> --- /dev/null
> +++ b/drivers/media/platform/qcom/venus/vdec.c
> @@ -0,0 +1,976 @@
<snip>
> +static int
> +vdec_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
> +{
> + struct venus_inst *inst = to_inst(file);
> +
> + if (s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
> + s->target != V4L2_SEL_TGT_COMPOSE)
> + return -EINVAL;
> +
> + switch (s->target) {
> + case V4L2_SEL_TGT_COMPOSE:
> + s->r.width = inst->out_width;
> + s->r.height = inst->out_height;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + s->r.top = 0;
> + s->r.left = 0;
> +
> + return 0;
> +}
This doesn't actually set anything, so what's the point of this function?
I've fixed the corresponding test in v4l2-compliance so you can now drop this
op and v4l2-compliance won't complain anymore.
> +static int vdec_start_streaming(struct vb2_queue *q, unsigned int count)
> +{
> + struct venus_inst *inst = vb2_get_drv_priv(q);
> + struct venus_core *core = inst->core;
> + struct device *dev = core->dev;
> + u32 ptype;
> + int ret;
> +
> + mutex_lock(&inst->lock);
> +
> + if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> + inst->streamon_out = 1;
> + else
> + inst->streamon_cap = 1;
> +
> + if (!(inst->streamon_out & inst->streamon_cap)) {
> + mutex_unlock(&inst->lock);
> + return 0;
> + }
> +
> + inst->reconfig = false;
> + inst->sequence = 0;
> + inst->codec_cfg = false;
> +
> + ret = pm_runtime_get_sync(dev);
> + if (ret < 0)
> + return ret;
This should be a goto so that 'helper_buffers_done(inst, VB2_BUF_STATE_QUEUED);'
is called on error.
It's wrong anyway since you don't unlock the mutex in this return path either.
> +
> + ret = vdec_init_session(inst);
> + if (ret)
> + goto put_sync;
> +
> + ret = vdec_set_properties(inst);
> + if (ret)
> + goto deinit_sess;
> +
> + if (core->res->hfi_version == HFI_VERSION_3XX) {
> + struct hfi_buffer_size_actual buf_sz;
> +
> + ptype = HFI_PROPERTY_PARAM_BUFFER_SIZE_ACTUAL;
> + buf_sz.type = HFI_BUFFER_OUTPUT;
> + buf_sz.size = inst->output_buf_size;
> +
> + ret = hfi_session_set_property(inst, ptype, &buf_sz);
> + if (ret)
> + goto deinit_sess;
> + }
> +
> + ret = vdec_verify_conf(inst);
> + if (ret)
> + goto deinit_sess;
> +
> + ret = helper_set_num_bufs(inst, inst->num_input_bufs,
> + inst->num_output_bufs);
> + if (ret)
> + goto deinit_sess;
> +
> + ret = helper_vb2_start_streaming(inst);
> + if (ret)
> + goto deinit_sess;
> +
> + mutex_unlock(&inst->lock);
> +
> + return 0;
> +
> +deinit_sess:
> + hfi_session_deinit(inst);
> +put_sync:
> + pm_runtime_put_sync(dev);
> + helper_buffers_done(inst, VB2_BUF_STATE_QUEUED);
> + if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> + inst->streamon_out = 0;
> + else
> + inst->streamon_cap = 0;
> + mutex_unlock(&inst->lock);
> + return ret;
> +}
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
