Hi Matt,
On Thursday 24 Nov 2016 00:04:24 Matt Ranostay wrote:
> On Wed, Nov 23, 2016 at 10:31 PM, Matt Ranostay wrote:
> > On Wed, Nov 23, 2016 at 8:30 AM, Laurent Pinchart wrote:
> >> On Tuesday 22 Nov 2016 17:18:40 Matt Ranostay wrote:
> >>> There are several thermal sensors that only have a low-speed bus
> >>> interface but output valid video data. This patchset enables support
> >>> for the AMG88xx "Grid-Eye" sensor family.
> >>>
> >>> Cc: Attila Kinali <attila@xxxxxxxxx>
> >>> Cc: Marek Vasut <marex@xxxxxxx>
> >>> Cc: Luca Barbato <lu_zero@xxxxxxxxxx>
> >>> Signed-off-by: Matt Ranostay <matt@ranostay.consulting>
> >>> ---
> >>> Changes from v1:
> >>> * correct i2c_polling_remove() operations
> >>> * fixed delay calcuation in buffer_queue()
> >>> * add include linux/slab.h
> >>>
> >>> Changes from v2:
> >>> * fix build error due to typo in include of slab.h
> >>>
> >>> drivers/media/i2c/Kconfig | 8 +
> >>> drivers/media/i2c/Makefile | 1 +
> >>> drivers/media/i2c/i2c-polling.c | 469 +++++++++++++++++++++++++++++++++
> >>
> >> Just looking at the driver name I believe a rename is needed. i2c-polling
> >> is a very generic name and would mislead many people into thinking about
> >> an I2C subsystem core feature instead of a video driver. "video-i2c" is
> >> one option, I'm open to other ideas.
> >>
> >>> 3 files changed, 478 insertions(+)
> >>> create mode 100644 drivers/media/i2c/i2c-polling.c
[snip]
> >>> diff --git a/drivers/media/i2c/i2c-polling.c
> >>> b/drivers/media/i2c/i2c-polling.c new file mode 100644
> >>> index 000000000000..46a4eecde2d2
> >>> --- /dev/null
> >>> +++ b/drivers/media/i2c/i2c-polling.c
[snip]
> >>> +static void buffer_queue(struct vb2_buffer *vb)
> >>> +{
> >>> + struct i2c_polling_data *data = vb2_get_drv_priv(vb->vb2_queue);
> >>> + unsigned int delay = 1000 / data->chip->max_fps;
> >>> + int delta;
> >>> +
> >>> + mutex_lock(&data->lock);
> >>> +
> >>> + delta = jiffies - data->last_update;
> >>> +
> >>> + if (delta < msecs_to_jiffies(delay)) {
> >>> + int tmp = (delay - jiffies_to_msecs(delta)) * 1000;
> >>> +
> >>> + usleep_range(tmp, tmp + 1000);
> >>> + }
> >>> + data->last_update = jiffies;
> >>> +
> >>> + mutex_unlock(&data->lock);
> >>> +
> >>> + vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
> >>> +}
> >>> +
> >>> +static void buffer_finish(struct vb2_buffer *vb)
> >>> +{
> >>> + struct i2c_polling_data *data = vb2_get_drv_priv(vb->vb2_queue);
> >>> + void *vbuf = vb2_plane_vaddr(vb, 0);
> >>> + int size = vb2_plane_size(vb, 0);
> >>> + int ret;
> >>> +
> >>> + mutex_lock(&data->lock);
> >>> +
> >>> + ret = data->chip->xfer(data, vbuf);
> >>> + if (ret < 0)
> >>> + vb->state = VB2_BUF_STATE_ERROR;
> >>
> >> That's not nice, the status should be set through vb2_buffer_done().
> >>
> >> You can't transfer data in the buffer_queue handler is that function
> >> can't sleep. Instead, I'm wondering whether it would make sense to
> >> perform transfers in a workqueue, to making timings less dependent on
> >> userspace.
> >
> > About the workqueue how would one signal to that the buffer is written
> > to buffer_queue/buffer_finish?
>
> Testing the workqueue way and it isn't fine enough... need to use some
> form of the high resolution timers. Need to figure the best way to do
> that with signaling back to the queue functions.. would completion
> queues make sense?
How about a kthread, as done in the vivid driver ?
> >>> + mutex_unlock(&data->lock);
> >>> +
> >>> + vb->timestamp = ktime_get_ns();
> >>> + vb2_set_plane_payload(vb, 0, ret ? 0 : size);
> >>> +}
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
