On Fri, Oct 9, 2009 at 5:34 AM, Ali Abdallah <aliov@xxxxxxxx> wrote: > Okay, i installed the latest drivers+the firmware of the device using > extract_xc3028.pl, the device seems to be detected now, i can detect all the > analog TV of my cable using tvtime, but manually, i mean i had to disable > signal detection when scanning, otherwise i got no results, since the > picture quality is terrible. > > Of course i'm sure that all the connections (cable to antenna, cable to the > usb stick, ...) are correct, since it works with my old PC equipped with a > PCI TV card. > > Any advice, what could be the problem? firmware? since you said (you added > support for this device) should i open a bug report? is this device reported > as working by other users? > > Please help if possible, almost two weeks with no real success. Could you please provide a screen shot of the tvtime output? Also, are you trying to capture over-the-air or are you capturing cable television? What analog standard are you using? PAL-BG? Did you make sure to tell tvtime which analog standard you are using? Could you try the S-Video or composite input and see if the picture quality is still bad (as this well help isolate whether it's a problem with the tuner chip or the decoder. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
