Re: [PATCH] [media] nec decoder: wrong bit order for nec32 protocol

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Em Wed,  9 Nov 2016 16:13:35 +0000
Sean Young <sean@xxxxxxxx> escreveu:

> The bits are sent in lsb first. Hardware decoders also send nec32
> in this order (e.g. dib0700). This should be consistent, however
> I have no way of knowing which order the LME2510 and Tivo keymaps
> are (the only two kernel keymaps with NEC32).

Hmm.. the lme2510 receives the scancode directly. So, this
patch shouldn't affect it. So, we're stuck with the Tivo IR.

On Tivo, only a few keys (with duplicated scancodes) don't start with
0xa10c. So, it *seems* that this is an address.

The best here would be to try to get a Tivo remote controller[1], and
do some tests with a driver that has a hardware decoder capable of
output NEC32 data, and some driver that receives raw IR data in
order to be sure.

In any case, we need to patch both the NEC32 decoder and the table
at the same time, to be 100% sure.

[1] or some universal remote controller that could emulate
the Tivo's scan codes. I suspect that the IR in question is
this one, but maybe Jarod could shed some light here:
	https://www.amazon.com/TiVo-Remote-Control-Universal-Replacement/dp/B00DYYKA04


> 
> Signed-off-by: Sean Young <sean@xxxxxxxx>
> ---
>  drivers/media/rc/ir-nec-decoder.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c
> index 2a9d155..ba02d05 100644
> --- a/drivers/media/rc/ir-nec-decoder.c
> +++ b/drivers/media/rc/ir-nec-decoder.c
> @@ -170,7 +170,10 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
>  		if (send_32bits) {
>  			/* NEC transport, but modified protocol, used by at
>  			 * least Apple and TiVo remotes */
> -			scancode = data->bits;
> +			scancode = address     << 24 |
> +				   not_address << 16 |
> +				   command     << 8 |
> +				   not_command;
>  			IR_dprintk(1, "NEC (modified) scancode 0x%08x\n", scancode);
>  			rc_type = RC_TYPE_NEC32;
>  		} else if ((address ^ not_address) != 0xff) {


Thanks,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux