Re: [v4.9-rc4] dvb-usb/cinergyT2 NULL pointer dereference

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2016-11-10 9:40 GMT+01:00 Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>:
> Em Wed, 9 Nov 2016 11:07:35 -0800
> Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> escreveu:
>
>> On Wed, Nov 9, 2016 at 3:09 AM, Jörg Otte <jrg.otte@xxxxxxxxx> wrote:
>> >
>> > Tried patch with no success. Again a NULL ptr dereferece.
>>
>> That patch was pure garbage, I think. Pretty much all the other
>> drivers that use the same approach will have the same issue. Adding
>> that init function just for the semaphore is crazy.
>>
>> I suspect a much simpler approach is to just miove the "data_mutex"
>> away from the priv area and into "struct dvb_usb_device" and
>> "dvb_usb_adapter". Sure, that grows those structures a tiny bit, and
>> not every driver may need that mutex, but it simplifies things
>> enormously. Mauro?
>>
>>              Linus
>
>
> [PATCH] cinergyT2-core: move data_mutex to struct dvb_usb_device
>
> The data_mutex is initialized too late, as it is needed for
> the device's power control, causing an OOPS:
>
> dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state.
> BUG: unable to handle kernel NULL pointer dereference at           (null)
> IP: [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 PGD 0
> Oops: 0002 [#1] SMP
> Modules linked in: dvb_usb_cinergyT2(+) dvb_usb
> CPU: 0 PID: 2029 Comm: modprobe Not tainted 4.9.0-rc4-dvbmod #24
> Hardware name: FUJITSU LIFEBOOK A544/FJNBB35 , BIOS Version 1.17 05/09/2014
> task: ffff88020e943840 task.stack: ffff8801f36ec000
> RIP: 0010:[<ffffffff846617af>]  [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100
> RSP: 0018:ffff8801f36efb10  EFLAGS: 00010282
> RAX: 0000000000000000 RBX: ffff88021509bdc8 RCX: 00000000c0000100
> RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88021509bdcc
> RBP: ffff8801f36efb58 R08: ffff88021f216320 R09: 0000000000100000
> R10: ffff88021f216320 R11: 00000023fee6c5a1 R12: ffff88020e943840
> R13: ffff88021509bdcc R14: 00000000ffffffff R15: ffff88021509bdd0
> FS:  00007f21adb86740(0000) GS:ffff88021f200000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000000000000 CR3: 0000000215bce000 CR4: 00000000001406f0
> Stack:
>  ffff88021509bdd0 0000000000000000 0000000000000000 ffffffffc0137c80
>  ffff88021509bdc8 ffff8801f5944000 0000000000000001 ffffffffc0136b00
>  ffff880213e52000 ffff88021509bdc8 ffffffff84661856 ffff88021509bd80
> Call Trace:
>  [<ffffffff84661856>] ? mutex_lock+0x16/0x25
>  [<ffffffffc013616f>] ? cinergyt2_power_ctrl+0x1f/0x60 [dvb_usb_cinergyT2]
>  [<ffffffffc012e67e>] ? dvb_usb_device_init+0x21e/0x5d0 [dvb_usb]
>  [<ffffffffc0136021>] ? cinergyt2_usb_probe+0x21/0x50 [dvb_usb_cinergyT2]
>  [<ffffffff844326f3>] ? usb_probe_interface+0xf3/0x2a0
>  [<ffffffff8438e348>] ? driver_probe_device+0x208/0x2b0
>  [<ffffffff8438e477>] ? __driver_attach+0x87/0x90
>  [<ffffffff8438e3f0>] ? driver_probe_device+0x2b0/0x2b0
>  [<ffffffff8438c612>] ? bus_for_each_dev+0x52/0x80
>  [<ffffffff8438d983>] ? bus_add_driver+0x1a3/0x220
>  [<ffffffff8438ec06>] ? driver_register+0x56/0xd0
>  [<ffffffff84431527>] ? usb_register_driver+0x77/0x130
>  [<ffffffffc013a000>] ? 0xffffffffc013a000
>  [<ffffffff84000426>] ? do_one_initcall+0x46/0x180
>  [<ffffffff840eb2c8>] ? free_vmap_area_noflush+0x38/0x70
>  [<ffffffff840f3844>] ? kmem_cache_alloc+0x84/0xc0
>  [<ffffffff840b802c>] ? do_init_module+0x50/0x1be
>  [<ffffffff84095adb>] ? load_module+0x1d8b/0x2100
>  [<ffffffff84093020>] ? find_symbol_in_section+0xa0/0xa0
>  [<ffffffff84095fe9>] ? SyS_finit_module+0x89/0x90
>  [<ffffffff846637a0>] ? entry_SYSCALL_64_fastpath+0x13/0x94
> Code: e8 a7 1d 00 00 8b 03 83 f8 01 0f 84 97 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 4c 89 3c 24 41 be ff ff ff ff 48 89 44 24 08 <48> 89 20 4c 89 64 24 10 eb 1a 49 c7 44 24 08 02 00 00 00 c6 43 RIP  [<ffffffff846617af>] __mutex_lock_slowpath+0x6f/0x100 RSP <ffff8801f36efb10>
> CR2: 0000000000000000
>
> So, move it to the struct dvb_usb_device and initialize it
> before calling the driver's callbacks.
>
> Reported-by: Jörg Otte <jrg.otte@xxxxxxxxx>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
>
> diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c
> index 8ac825413d5a..87e3bd33900d 100644
> --- a/drivers/media/usb/dvb-usb/cinergyT2-core.c
> +++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c
> @@ -42,7 +42,6 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
>  struct cinergyt2_state {
>         u8 rc_counter;
>         unsigned char data[64];
> -       struct mutex data_mutex;
>  };
>
>  /* We are missing a release hook with usb_device data */
> @@ -56,12 +55,12 @@ static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable)
>         struct cinergyt2_state *st = d->priv;
>         int ret;
>
> -       mutex_lock(&st->data_mutex);
> +       mutex_lock(&d->data_mutex);
>         st->data[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER;
>         st->data[1] = enable ? 1 : 0;
>
>         ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 64, 0);
> -       mutex_unlock(&st->data_mutex);
> +       mutex_unlock(&d->data_mutex);
>
>         return ret;
>  }
> @@ -71,12 +70,12 @@ static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable)
>         struct cinergyt2_state *st = d->priv;
>         int ret;
>
> -       mutex_lock(&st->data_mutex);
> +       mutex_lock(&d->data_mutex);
>         st->data[0] = CINERGYT2_EP1_SLEEP_MODE;
>         st->data[1] = enable ? 0 : 1;
>
>         ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 3, 0);
> -       mutex_unlock(&st->data_mutex);
> +       mutex_unlock(&d->data_mutex);
>
>         return ret;
>  }
> @@ -89,7 +88,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
>
>         adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev);
>
> -       mutex_lock(&st->data_mutex);
> +       mutex_lock(&d->data_mutex);
>         st->data[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION;
>
>         ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0);
> @@ -97,7 +96,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
>                 deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep "
>                         "state info\n");
>         }
> -       mutex_unlock(&st->data_mutex);
> +       mutex_unlock(&d->data_mutex);
>
>         /* Copy this pointer as we are gonna need it in the release phase */
>         cinergyt2_usb_device = adap->dev;
> @@ -166,7 +165,7 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
>
>         *state = REMOTE_NO_KEY_PRESSED;
>
> -       mutex_lock(&st->data_mutex);
> +       mutex_lock(&d->data_mutex);
>         st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS;
>
>         ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0);
> @@ -202,7 +201,7 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
>         }
>
>  ret:
> -       mutex_unlock(&st->data_mutex);
> +       mutex_unlock(&d->data_mutex);
>         return ret;
>  }
>
> @@ -210,7 +209,6 @@ static int cinergyt2_usb_probe(struct usb_interface *intf,
>                                 const struct usb_device_id *id)
>  {
>         struct dvb_usb_device *d;
> -       struct cinergyt2_state *st;
>         int ret;
>
>         ret = dvb_usb_device_init(intf, &cinergyt2_properties,
> @@ -218,9 +216,6 @@ static int cinergyt2_usb_probe(struct usb_interface *intf,
>         if (ret < 0)
>                 return ret;
>
> -       st = d->priv;
> -       mutex_init(&st->data_mutex);
> -
>         return 0;
>  }
>
> diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
> index 3896ba9a4179..84308569e7dc 100644
> --- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
> +++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
> @@ -142,6 +142,7 @@ static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums)
>  {
>         int ret = 0;
>
> +       mutex_init(&d->data_mutex);
>         mutex_init(&d->usb_mutex);
>         mutex_init(&d->i2c_mutex);
>
> diff --git a/drivers/media/usb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h
> index 1448c3d27ea2..12b71acee550 100644
> --- a/drivers/media/usb/dvb-usb/dvb-usb.h
> +++ b/drivers/media/usb/dvb-usb/dvb-usb.h
> @@ -404,6 +404,7 @@ struct dvb_usb_adapter {
>   *  Powered is in/decremented for each call to modify the state.
>   * @udev: pointer to the device's struct usb_device.
>   *
> + * @data_mutex: mutex to protect the data structure used to store URB data
>   * @usb_mutex: semaphore of USB control messages (reading needs two messages)
>   * @i2c_mutex: semaphore for i2c-transfers
>   *
> @@ -433,6 +434,7 @@ struct dvb_usb_device {
>         int powered;
>
>         /* locking */
> +       struct mutex data_mutex;
>         struct mutex usb_mutex;
>
>         /* i2c */
>
>


The patch works for me.

Thanks, Jörg
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux