Resending this patch series to bring in dri-devel, and interested parties. Apologies for the resend to linux-media and linux-renesas-soc. This short series extends the VSP1 on the RCar platforms to allow creating a V4L2 video node on display pipelines where the hardware allows writing to memory simultaneously. In this instance, the hardware restricts the output to match the display size (no rescaling) but does allow pixel format conversion. A current limitation (that the DRI devs might have ideas about) is that the vb2 buffers are swapped on the atomic_flush() calls rather than on vsync events. Ideally swapping buffers would occur on every vsync such that the output rate of the video node would match the display rate, however the timing here proves more difficult to synchronise the updates from a vysnc and flush without adding latency to the flush. Is there anything I can do to synchronise the v4l2 buffers with the DRM/KMS interfaces currently? Or does anyone have any suggestions for extending as such? And of course ideas on anything that could be done generically to support other targets as well would be worth considering - though currently this implementation is very RCar/VSP1 specific. Kieran Bingham (2): Revert "[media] v4l: vsp1: Supply frames to the DU continuously" v4l: vsp1: Provide a writeback video device drivers/media/platform/vsp1/vsp1.h | 1 + drivers/media/platform/vsp1/vsp1_drm.c | 19 ++++ drivers/media/platform/vsp1/vsp1_drv.c | 5 +- drivers/media/platform/vsp1/vsp1_rwpf.h | 1 + drivers/media/platform/vsp1/vsp1_video.c | 161 ++++++++++++++++++++++++++++--- drivers/media/platform/vsp1/vsp1_video.h | 5 + drivers/media/platform/vsp1/vsp1_wpf.c | 19 +++- 7 files changed, 193 insertions(+), 18 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
