Tested with a homebrew serial ir. Signed-off-by: Sean Young <sean@xxxxxxxx> --- MAINTAINERS | 6 + drivers/media/rc/Kconfig | 17 + drivers/media/rc/Makefile | 1 + drivers/media/rc/serial_ir.c | 1020 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 1044 insertions(+) create mode 100644 drivers/media/rc/serial_ir.c diff --git a/MAINTAINERS b/MAINTAINERS index 93e9f42..cd8fd50 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10604,6 +10604,12 @@ S: Maintained F: Documentation/devicetree/bindings/serial/ F: drivers/tty/serial/ +SERIAL IR RECEIVER +M: Sean Young <sean@xxxxxxxx> +L: linux-media@xxxxxxxxxxxxxxx +S: Maintained +F: drivers/media/rc/serial_ir.c + STI CEC DRIVER M: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx> L: kernel@xxxxxxxxxxx diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 370e16e..629e8ca 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -389,4 +389,21 @@ config IR_SUNXI To compile this driver as a module, choose M here: the module will be called sunxi-ir. +config IR_SERIAL + tristate "Homebrew Serial Port Receiver" + depends on RC_CORE + ---help--- + Say Y if you want to use Homebrew Serial Port Receivers and + Transceivers. + + To compile this driver as a module, choose M here: the module will + be called serial-ir. + +config IR_SERIAL_TRANSMITTER + bool "Serial Port Transmitter" + default y + depends on IR_SERIAL + ---help--- + Serial Port Transmitter support + endif #RC_DEVICES diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile index 379a5c0..3a984ee 100644 --- a/drivers/media/rc/Makefile +++ b/drivers/media/rc/Makefile @@ -37,3 +37,4 @@ obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o obj-$(CONFIG_RC_ST) += st_rc.o obj-$(CONFIG_IR_SUNXI) += sunxi-cir.o obj-$(CONFIG_IR_IMG) += img-ir/ +obj-$(CONFIG_IR_SERIAL) += serial_ir.o diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c new file mode 100644 index 0000000..77193c3 --- /dev/null +++ b/drivers/media/rc/serial_ir.c @@ -0,0 +1,1020 @@ +/* + * serial-ir.c + * + * serial-ir - Device driver that records pulse- and pause-lengths + * (space-lengths) between DDCD event on a serial port. + * + * Copyright (C) 1996,97 Ralph Metzler <rjkm@xxxxxxxxxxxxxxxx> + * Copyright (C) 1998 Trent Piepho <xyzzy@xxxxxxxxxxxxxxxx> + * Copyright (C) 1998 Ben Pfaff <blp@xxxxxxx> + * Copyright (C) 1999 Christoph Bartelmus <lirc@xxxxxxxxxxxx> + * Copyright (C) 2007 Andrei Tanas <andrei@xxxxxxxx> (suspend/resume support) + * Copyright (C) 2016 Sean Young <sean@xxxxxxxx> (port to rc-core) + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Steve's changes to improve transmission fidelity: + * - for systems with the rdtsc instruction and the clock counter, a + * send_pule that times the pulses directly using the counter. + * This means that the IR_SERIAL_TRANSMITTER_LATENCY fudge is + * not needed. Measurement shows very stable waveform, even where + * PCI activity slows the access to the UART, which trips up other + * versions. + * - For other system, non-integer-microsecond pulse/space lengths, + * done using fixed point binary. So, much more accurate carrier + * frequency. + * - fine tuned transmitter latency, taking advantage of fractional + * microseconds in previous change + * - Fixed bug in the way transmitter latency was accounted for by + * tuning the pulse lengths down - the send_pulse routine ignored + * this overhead as it timed the overall pulse length - so the + * pulse frequency was right but overall pulse length was too + * long. Fixed by accounting for latency on each pulse/space + * iteration. + * + * Steve Davies <steve@xxxxxxxxxxxxx> July 2001 + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/serial_reg.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <media/rc-core.h> + +/* From Intel IXP42X Developer's Manual (#252480-005): */ +/* ftp://download.intel.com/design/network/manuals/25248005.pdf */ +#define UART_IE_IXP42X_UUE 0x40 /* IXP42X UART Unit enable */ +#define UART_IE_IXP42X_RTOIE 0x10 /* IXP42X Receiver Data Timeout int.enable */ + +#define DRIVER_NAME "serial_ir" + +struct serial_ir { + int signal_pin; + int signal_pin_change; + u8 on; + u8 off; + long (*send_pulse)(unsigned long length); + void (*send_space)(long length); + bool set_send_carrier; + bool set_duty_cycle; + spinlock_t lock; +}; + +#define IR_HOMEBREW 0 +#define IR_IRDEO 1 +#define IR_IRDEO_REMOTE 2 +#define IR_ANIMAX 3 +#define IR_IGOR 4 +#define IR_NSLU2 5 + +/*** module parameters ***/ +static int type; +static int io; +static int irq; +static bool iommap; +static int ioshift; +static bool softcarrier = true; +static bool share_irq; +static int sense = -1; /* -1 = auto, 0 = active high, 1 = active low */ +static bool txsense; /* 0 = active high, 1 = active low */ + +/* forward declarations */ +static long send_pulse_irdeo(unsigned long length); +static long send_pulse_homebrew(unsigned long length); +static void send_space_irdeo(long length); +static void send_space_homebrew(long length); + +static struct serial_ir hardware[] = { + [IR_HOMEBREW] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_HOMEBREW].lock), + .signal_pin = UART_MSR_DCD, + .signal_pin_change = UART_MSR_DDCD, + .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR), + .off = (UART_MCR_RTS | UART_MCR_OUT2), + .send_pulse = send_pulse_homebrew, + .send_space = send_space_homebrew, +#ifdef CONFIG_IR_SERIAL_TRANSMITTER + .set_send_carrier = true, + .set_duty_cycle = true, +#endif + }, + + [IR_IRDEO] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_IRDEO].lock), + .signal_pin = UART_MSR_DSR, + .signal_pin_change = UART_MSR_DDSR, + .on = UART_MCR_OUT2, + .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2), + .send_pulse = send_pulse_irdeo, + .send_space = send_space_irdeo, + .set_duty_cycle = true, + }, + + [IR_IRDEO_REMOTE] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_IRDEO_REMOTE].lock), + .signal_pin = UART_MSR_DSR, + .signal_pin_change = UART_MSR_DDSR, + .on = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2), + .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2), + .send_pulse = send_pulse_irdeo, + .send_space = send_space_irdeo, + .set_duty_cycle = true, + }, + + [IR_ANIMAX] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_ANIMAX].lock), + .signal_pin = UART_MSR_DCD, + .signal_pin_change = UART_MSR_DDCD, + .on = 0, + .off = (UART_MCR_RTS | UART_MCR_DTR | UART_MCR_OUT2), + .send_pulse = NULL, + .send_space = NULL, + }, + + [IR_IGOR] = { + .lock = __SPIN_LOCK_UNLOCKED(hardware[IR_IGOR].lock), + .signal_pin = UART_MSR_DSR, + .signal_pin_change = UART_MSR_DDSR, + .on = (UART_MCR_RTS | UART_MCR_OUT2 | UART_MCR_DTR), + .off = (UART_MCR_RTS | UART_MCR_OUT2), + .send_pulse = send_pulse_homebrew, + .send_space = send_space_homebrew, +#ifdef CONFIG_IR_SERIAL_TRANSMITTER + .set_send_carrier = true, + .set_duty_cycle = true, +#endif + }, +}; + +#define RS_ISR_PASS_LIMIT 256 + +/* + * A long pulse code from a remote might take up to 300 bytes. The + * daemon should read the bytes as soon as they are generated, so take + * the number of keys you think you can push before the daemon runs + * and multiply by 300. The driver will warn you if you overrun this + * buffer. If you have a slow computer or non-busmastering IDE disks, + * maybe you will need to increase this. + */ + +/* This MUST be a power of two! It has to be larger than 1 as well. */ + +static ktime_t lastkt; + +static struct rc_dev *rcdev; + +static unsigned int freq = 38000; +static unsigned int duty_cycle = 50; + +/* Initialized in init_timing_params() */ +static unsigned long period; +static unsigned long pulse_width; +static unsigned long space_width; + +#if defined(__i386__) +/* + * From: + * Linux I/O port programming mini-HOWTO + * Author: Riku Saikkonen <Riku.Saikkonen@xxxxxx> + * v, 28 December 1997 + * + * [...] + * Actually, a port I/O instruction on most ports in the 0-0x3ff range + * takes almost exactly 1 microsecond, so if you're, for example, using + * the parallel port directly, just do additional inb()s from that port + * to delay. + * [...] + */ +/* transmitter latency 1.5625us 0x1.90 - this figure arrived at from + * comment above plus trimming to match actual measured frequency. + * This will be sensitive to cpu speed, though hopefully most of the 1.5us + * is spent in the uart access. Still - for reference test machine was a + * 1.13GHz Athlon system - Steve + */ + +/* + * changed from 400 to 450 as this works better on slower machines; + * faster machines will use the rdtsc code anyway + */ +#define IR_SERIAL_TRANSMITTER_LATENCY 450 + +#else + +/* does anybody have information on other platforms ? */ +/* 256 = 1<<8 */ +#define IR_SERIAL_TRANSMITTER_LATENCY 256 + +#endif /* __i386__ */ +/* + * FIXME: should we be using hrtimers instead of this + * IR_SERIAL_TRANSMITTER_LATENCY nonsense? + */ + +/* fetch serial input packet (1 byte) from register offset */ +static u8 sinp(int offset) +{ + if (iommap) + /* the register is memory-mapped */ + offset <<= ioshift; + + return inb(io + offset); +} + +/* write serial output packet (1 byte) of value to register offset */ +static void soutp(int offset, u8 value) +{ + if (iommap) + /* the register is memory-mapped */ + offset <<= ioshift; + + outb(value, io + offset); +} + +static void on(void) +{ + if (txsense) + soutp(UART_MCR, hardware[type].off); + else + soutp(UART_MCR, hardware[type].on); +} + +static void off(void) +{ + if (txsense) + soutp(UART_MCR, hardware[type].on); + else + soutp(UART_MCR, hardware[type].off); +} + +#ifndef MAX_UDELAY_MS +#define MAX_UDELAY_US 5000 +#else +#define MAX_UDELAY_US (MAX_UDELAY_MS*1000) +#endif + +static void safe_udelay(unsigned long usecs) +{ + while (usecs > MAX_UDELAY_US) { + udelay(MAX_UDELAY_US); + usecs -= MAX_UDELAY_US; + } + udelay(usecs); +} + +#ifdef USE_RDTSC +/* + * This is an overflow/precision juggle, complicated in that we can't + * do long long divide in the kernel + */ + +/* + * When we use the rdtsc instruction to measure clocks, we keep the + * pulse and space widths as clock cycles. As this is CPU speed + * dependent, the widths must be calculated in init_port and ioctl + * time + */ + +static int init_timing_params(unsigned int new_duty_cycle, + unsigned int new_freq) +{ + __u64 loops_per_sec, work; + + duty_cycle = new_duty_cycle; + freq = new_freq; + + loops_per_sec = __this_cpu_read(cpu.info.loops_per_jiffy); + loops_per_sec *= HZ; + + /* How many clocks in a microsecond?, avoiding long long divide */ + work = loops_per_sec; + work *= 4295; /* 4295 = 2^32 / 1e6 */ + + /* + * Carrier period in clocks, approach good up to 32GHz clock, + * gets carrier frequency within 8Hz + */ + period = loops_per_sec >> 3; + period /= (freq >> 3); + + /* Derive pulse and space from the period */ + pulse_width = period * duty_cycle / 100; + space_width = period - pulse_width; + pr_debug("in init_timing_params, freq=%d, duty_cycle=%d, clk/jiffy=%ld, pulse=%ld, space=%ld, conv_us_to_clocks=%ld\n", + freq, duty_cycle, __this_cpu_read(cpu_info.loops_per_jiffy), + pulse_width, space_width, conv_us_to_clocks); + return 0; +} +#else /* ! USE_RDTSC */ +static int init_timing_params(unsigned int new_duty_cycle, + unsigned int new_freq) +{ +/* + * period, pulse/space width are kept with 8 binary places - + * IE multiplied by 256. + */ + if (256 * 1000000L / new_freq * new_duty_cycle / 100 <= + IR_SERIAL_TRANSMITTER_LATENCY) + return -EINVAL; + if (256 * 1000000L / new_freq * (100 - new_duty_cycle) / 100 <= + IR_SERIAL_TRANSMITTER_LATENCY) + return -EINVAL; + duty_cycle = new_duty_cycle; + freq = new_freq; + period = 256 * 1000000L / freq; + pulse_width = period * duty_cycle / 100; + space_width = period - pulse_width; + pr_debug("in init_timing_params, freq=%d pulse=%ld, space=%ld\n", + freq, pulse_width, space_width); + return 0; +} +#endif /* USE_RDTSC */ + + +/* return value: space length delta */ + +static long send_pulse_irdeo(unsigned long length) +{ + long rawbits, ret; + int i; + unsigned char output; + unsigned char chunk, shifted; + + /* how many bits have to be sent ? */ + rawbits = length * 1152 / 10000; + if (duty_cycle > 50) + chunk = 3; + else + chunk = 1; + for (i = 0, output = 0x7f; rawbits > 0; rawbits -= 3) { + shifted = chunk << (i * 3); + shifted >>= 1; + output &= (~shifted); + i++; + if (i == 3) { + soutp(UART_TX, output); + while (!(sinp(UART_LSR) & UART_LSR_THRE)) + ; + output = 0x7f; + i = 0; + } + } + if (i != 0) { + soutp(UART_TX, output); + while (!(sinp(UART_LSR) & UART_LSR_TEMT)) + ; + } + + if (i == 0) + ret = (-rawbits) * 10000 / 1152; + else + ret = (3 - i) * 3 * 10000 / 1152 + (-rawbits) * 10000 / 1152; + + return ret; +} + +/* Version using udelay() */ + +/* + * here we use fixed point arithmetic, with 8 + * fractional bits. that gets us within 0.1% or so of the right average + * frequency, albeit with some jitter in pulse length - Steve + * + * This should use ndelay instead. + */ + +/* To match 8 fractional bits used for pulse/space length */ + +static long send_pulse_homebrew_softcarrier(unsigned long length) +{ + int flag; + unsigned long actual, target, d; + + length <<= 8; + + actual = 0; target = 0; flag = 0; + while (actual < length) { + if (flag) { + off(); + target += space_width; + } else { + on(); + target += pulse_width; + } + d = (target - actual - + IR_SERIAL_TRANSMITTER_LATENCY + 128) >> 8; + /* + * Note - we've checked in ioctl that the pulse/space + * widths are big enough so that d is > 0 + */ + udelay(d); + actual += (d << 8) + IR_SERIAL_TRANSMITTER_LATENCY; + flag = !flag; + } + return (actual-length) >> 8; +} + +static long send_pulse_homebrew(unsigned long length) +{ + if (length <= 0) + return 0; + + if (softcarrier) + return send_pulse_homebrew_softcarrier(length); + + on(); + safe_udelay(length); + return 0; +} + +static void send_space_irdeo(long length) +{ + if (length <= 0) + return; + + safe_udelay(length); +} + +static void send_space_homebrew(long length) +{ + off(); + if (length <= 0) + return; + safe_udelay(length); +} + +static void frbwrite(unsigned int l, bool is_pulse) +{ + /* simple noise filter */ + static unsigned int ptr, pulse, space; + DEFINE_IR_RAW_EVENT(ev); + + if (ptr > 0 && is_pulse) { + pulse += l; + if (pulse > 250000) { + ev.duration = space; + ev.pulse = false; + ir_raw_event_store_with_filter(rcdev, &ev); + ev.duration = pulse; + ev.pulse = true; + ir_raw_event_store_with_filter(rcdev, &ev); + ptr = 0; + pulse = 0; + } + return; + } + if (!is_pulse) { + if (ptr == 0) { + if (l > 20000000) { + space = l; + ptr++; + return; + } + } else { + if (l > 20000000) { + space += pulse; + if (space > IR_MAX_DURATION) + space = IR_MAX_DURATION; + space += l; + if (space > IR_MAX_DURATION) + space = IR_MAX_DURATION; + pulse = 0; + return; + } + + ev.duration = space; + ev.pulse = false; + ir_raw_event_store_with_filter(rcdev, &ev); + ev.duration = pulse; + ev.pulse = true; + ir_raw_event_store_with_filter(rcdev, &ev); + ptr = 0; + pulse = 0; + } + } + + ev.duration = l; + ev.pulse = is_pulse; + ir_raw_event_store_with_filter(rcdev, &ev); +} + +static irqreturn_t serial_ir_irq_handler(int i, void *blah) +{ + ktime_t kt; + int counter, dcd; + u8 status; + ktime_t delkt; + unsigned int data; + static int last_dcd = -1; + + if ((sinp(UART_IIR) & UART_IIR_NO_INT)) { + /* not our interrupt */ + return IRQ_NONE; + } + + counter = 0; + do { + counter++; + status = sinp(UART_MSR); + if (counter > RS_ISR_PASS_LIMIT) { + pr_warn("AIEEEE: We're caught!\n"); + break; + } + if ((status & hardware[type].signal_pin_change) + && sense != -1) { + /* get current time */ + kt = ktime_get(); + + /* + * If PULSE_BIT is set a pulse has been + * received, otherwise a space has been + * received. The driver needs to know if your + * receiver is active high or active low, or + * the space/pulse sense could be + * inverted. The bits denoted by PULSE_MASK are + * the length in microseconds. Lengths greater + * than or equal to 16 seconds are clamped to + * PULSE_MASK. All other bits are unused. + * This is a much simpler interface for user + * programs, as well as eliminating "out of + * phase" errors with space/pulse + * autodetection. + */ + + /* calc time since last interrupt in microseconds */ + dcd = (status & hardware[type].signal_pin) ? 1 : 0; + + if (dcd == last_dcd) { + pr_warn("ignoring spike: %d %d %llx %llx\n", + dcd, sense, ktime_to_us(kt), + ktime_to_us(lastkt)); + continue; + } + + delkt = ktime_sub(kt, lastkt); + if (ktime_compare(delkt, ktime_set(15, 0)) > 0) { + data = IR_MAX_DURATION; /* really long time */ + if (!(dcd^sense)) { + /* sanity check */ + pr_warn("AIEEEE: %d %d %llx %llx\n", + dcd, sense, ktime_to_us(kt), + ktime_to_us(lastkt)); + /* + * detecting pulse while this + * MUST be a space! + */ + sense = sense ? 0 : 1; + } + } else + data = (unsigned int)ktime_to_ns(delkt); + frbwrite(data, !(dcd^sense)); + lastkt = kt; + last_dcd = dcd; + ir_raw_event_handle(rcdev); + } + } while (!(sinp(UART_IIR) & UART_IIR_NO_INT)); /* still pending ? */ + return IRQ_HANDLED; +} + + +static int hardware_init_port(void) +{ + u8 scratch, scratch2, scratch3; + + /* + * This is a simple port existence test, borrowed from the autoconfig + * function in drivers/serial/8250.c + */ + scratch = sinp(UART_IER); + soutp(UART_IER, 0); +#ifdef __i386__ + outb(0xff, 0x080); +#endif + scratch2 = sinp(UART_IER) & 0x0f; + soutp(UART_IER, 0x0f); +#ifdef __i386__ + outb(0x00, 0x080); +#endif + scratch3 = sinp(UART_IER) & 0x0f; + soutp(UART_IER, scratch); + if (scratch2 != 0 || scratch3 != 0x0f) { + /* we fail, there's nothing here */ + pr_err("port existence test failed, cannot continue\n"); + return -ENODEV; + } + + /* Set DLAB 0. */ + soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB)); + + /* First of all, disable all interrupts */ + soutp(UART_IER, sinp(UART_IER) & + (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI))); + + /* Clear registers. */ + sinp(UART_LSR); + sinp(UART_RX); + sinp(UART_IIR); + sinp(UART_MSR); + + /* Set line for power source */ + off(); + + /* Clear registers again to be sure. */ + sinp(UART_LSR); + sinp(UART_RX); + sinp(UART_IIR); + sinp(UART_MSR); + + switch (type) { + case IR_IRDEO: + case IR_IRDEO_REMOTE: + /* setup port to 7N1 @ 115200 Baud */ + /* 7N1+start = 9 bits at 115200 ~ 3 bits at 38kHz */ + + /* Set DLAB 1. */ + soutp(UART_LCR, sinp(UART_LCR) | UART_LCR_DLAB); + /* Set divisor to 1 => 115200 Baud */ + soutp(UART_DLM, 0); + soutp(UART_DLL, 1); + /* Set DLAB 0 + 7N1 */ + soutp(UART_LCR, UART_LCR_WLEN7); + /* THR interrupt already disabled at this point */ + break; + default: + break; + } + + return 0; +} + +static int serial_ir_probe(struct platform_device *dev) +{ + int i, nlow, nhigh, result; + + result = devm_request_irq(&dev->dev, irq, serial_ir_irq_handler, + (share_irq ? IRQF_SHARED : 0), + DRIVER_NAME, &hardware); + if (result < 0) { + if (result == -EBUSY) + dev_err(&dev->dev, "IRQ %d busy\n", irq); + else if (result == -EINVAL) + dev_err(&dev->dev, "Bad irq number or handler\n"); + return result; + } + + /* Reserve io region. */ + /* + * Future MMAP-Developers: Attention! + * For memory mapped I/O you *might* need to use ioremap() first, + * for the NSLU2 it's done in boot code. + */ + if (((iommap) + && (devm_request_mem_region(&dev->dev, iommap, 8 << ioshift, + DRIVER_NAME) == NULL)) + || ((!iommap) + && (devm_request_region(&dev->dev, io, 8, + DRIVER_NAME) == NULL))) { + dev_err(&dev->dev, "port %04x already in use\n", io); + dev_warn(&dev->dev, "use 'setserial /dev/ttySX uart none'\n"); + dev_warn(&dev->dev, + "or compile the serial port driver as module and\n"); + dev_warn(&dev->dev, "make sure this module is loaded first\n"); + return -EBUSY; + } + + result = hardware_init_port(); + if (result < 0) + return result; + + /* Initialize pulse/space widths */ + init_timing_params(duty_cycle, freq); + + /* If pin is high, then this must be an active low receiver. */ + if (sense == -1) { + /* wait 1/2 sec for the power supply */ + msleep(500); + + /* + * probe 9 times every 0.04s, collect "votes" for + * active high/low + */ + nlow = 0; + nhigh = 0; + for (i = 0; i < 9; i++) { + if (sinp(UART_MSR) & hardware[type].signal_pin) + nlow++; + else + nhigh++; + msleep(40); + } + sense = nlow >= nhigh ? 1 : 0; + dev_info(&dev->dev, "auto-detected active %s receiver\n", + sense ? "low" : "high"); + } else + dev_info(&dev->dev, "Manually using active %s receiver\n", + sense ? "low" : "high"); + + dev_dbg(&dev->dev, "Interrupt %d, port %04x obtained\n", irq, io); + return 0; +} + +static int serial_ir_open(struct rc_dev *rcdev) +{ + unsigned long flags; + + /* initialize timestamp */ + lastkt = ktime_get(); + + spin_lock_irqsave(&hardware[type].lock, flags); + + /* Set DLAB 0. */ + soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB)); + + soutp(UART_IER, sinp(UART_IER)|UART_IER_MSI); + + spin_unlock_irqrestore(&hardware[type].lock, flags); + + return 0; +} + +static void serial_ir_close(struct rc_dev *rcdev) +{ + unsigned long flags; + + spin_lock_irqsave(&hardware[type].lock, flags); + + /* Set DLAB 0. */ + soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB)); + + /* First of all, disable all interrupts */ + soutp(UART_IER, sinp(UART_IER) & + (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI))); + spin_unlock_irqrestore(&hardware[type].lock, flags); +} + +static int serial_ir_tx(struct rc_dev *dev, unsigned int *txbuf, + unsigned int count) +{ + unsigned long flags; + long delta = 0; + int i; + + spin_lock_irqsave(&hardware[type].lock, flags); + if (type == IR_IRDEO) { + /* DTR, RTS down */ + on(); + } + for (i = 0; i < count; i++) { + if (i%2) + hardware[type].send_space(txbuf[i] - delta); + else + delta = hardware[type].send_pulse(txbuf[i]); + } + off(); + spin_unlock_irqrestore(&hardware[type].lock, flags); + return count; +} + +static int serial_ir_tx_duty_cycle(struct rc_dev *dev, u32 cycle) +{ + return init_timing_params(cycle, freq); +} + +static int serial_ir_tx_carrier(struct rc_dev *dev, u32 carrier) +{ + if (carrier > 500000 || carrier < 20000) + return -EINVAL; + + return init_timing_params(duty_cycle, carrier); +} + +static struct platform_device *serial_ir_dev; + +static int serial_ir_suspend(struct platform_device *dev, + pm_message_t state) +{ + /* Set DLAB 0. */ + soutp(UART_LCR, sinp(UART_LCR) & (~UART_LCR_DLAB)); + + /* Disable all interrupts */ + soutp(UART_IER, sinp(UART_IER) & + (~(UART_IER_MSI|UART_IER_RLSI|UART_IER_THRI|UART_IER_RDI))); + + /* Clear registers. */ + sinp(UART_LSR); + sinp(UART_RX); + sinp(UART_IIR); + sinp(UART_MSR); + + return 0; +} + +static int serial_ir_resume(struct platform_device *dev) +{ + unsigned long flags; + int result; + + result = hardware_init_port(); + if (result < 0) + return result; + + spin_lock_irqsave(&hardware[type].lock, flags); + /* Enable Interrupt */ + lastkt = ktime_get(); + soutp(UART_IER, sinp(UART_IER)|UART_IER_MSI); + off(); + + spin_unlock_irqrestore(&hardware[type].lock, flags); + + return 0; +} + +static struct platform_driver serial_ir_driver = { + .probe = serial_ir_probe, + .suspend = serial_ir_suspend, + .resume = serial_ir_resume, + .driver = { + .name = "serial_ir", + }, +}; + +static int __init serial_ir_init(void) +{ + int result; + + result = platform_driver_register(&serial_ir_driver); + if (result) + return result; + + serial_ir_dev = platform_device_alloc("serial_ir", 0); + if (!serial_ir_dev) { + result = -ENOMEM; + goto exit_driver_unregister; + } + + result = platform_device_add(serial_ir_dev); + if (result) + goto exit_device_put; + + return 0; + +exit_device_put: + platform_device_put(serial_ir_dev); +exit_driver_unregister: + platform_driver_unregister(&serial_ir_driver); + return result; +} + +static void serial_ir_exit(void) +{ + platform_device_unregister(serial_ir_dev); + platform_driver_unregister(&serial_ir_driver); +} + +static int __init serial_ir_init_module(void) +{ + int result; + + switch (type) { + case IR_HOMEBREW: + case IR_IRDEO: + case IR_IRDEO_REMOTE: + case IR_ANIMAX: + case IR_IGOR: + case IR_NSLU2: + /* if nothing specified, use ttyS0/com1 and irq 4 */ + io = io ? io : 0x3f8; + irq = irq ? irq : 4; + break; + default: + return -EINVAL; + } + if (!softcarrier) { + switch (type) { + case IR_HOMEBREW: + case IR_IGOR: + hardware[type].set_send_carrier = false; + hardware[type].set_duty_cycle = false; + break; + } + } + + /* make sure sense is either -1, 0, or 1 */ + if (sense != -1) + sense = !!sense; + + result = serial_ir_init(); + if (result) + return result; + + rcdev = devm_rc_allocate_device(&serial_ir_dev->dev); + + if (hardware[type].send_pulse && hardware[type].send_space) + rcdev->tx_ir = serial_ir_tx; + if (hardware[type].set_send_carrier) + rcdev->s_tx_carrier = serial_ir_tx_carrier; + if (hardware[type].set_duty_cycle) + rcdev->s_tx_duty_cycle = serial_ir_tx_duty_cycle; + + switch (type) { + case IR_HOMEBREW: + rcdev->input_name = "Serial IR type home-brew"; + break; + case IR_IRDEO: + rcdev->input_name = "Serial IR type IRdeo"; + break; + case IR_IRDEO_REMOTE: + rcdev->input_name = "Serial IR type IRdeo remote"; + break; + case IR_ANIMAX: + rcdev->input_name = "Serial IR type AnimaX"; + break; + case IR_IGOR: + rcdev->input_name = "Serial IR type IgorPlug"; + break; + case IR_NSLU2: + rcdev->input_name = "Serial IR type NSLU2 RX:CTS2/TX:GreenLED)"; + break; + } + + rcdev->input_phys = DRIVER_NAME "/input0"; + rcdev->input_id.bustype = BUS_HOST; + rcdev->input_id.vendor = 0x0001; + rcdev->input_id.product = 0x0001; + rcdev->input_id.version = 0x0100; + rcdev->open = serial_ir_open; + rcdev->close = serial_ir_close; + rcdev->dev.parent = &serial_ir_dev->dev; + rcdev->driver_type = RC_DRIVER_IR_RAW; + rcdev->allowed_protocols = RC_BIT_ALL; + rcdev->driver_name = DRIVER_NAME; + rcdev->map_name = RC_MAP_RC6_MCE; + rcdev->timeout = IR_DEFAULT_TIMEOUT; + rcdev->rx_resolution = 250000; + + return rc_register_device(rcdev); +} + +static void __exit serial_ir_exit_module(void) +{ + rc_unregister_device(rcdev); + serial_ir_exit(); +} + + +module_init(serial_ir_init_module); +module_exit(serial_ir_exit_module); + +MODULE_DESCRIPTION("Infra-red receiver driver for serial ports."); +MODULE_AUTHOR("Ralph Metzler, Trent Piepho, Ben Pfaff, Christoph Bartelmus, Andrei Tanas"); +MODULE_LICENSE("GPL"); + +module_param(type, int, 0444); +MODULE_PARM_DESC(type, "Hardware type (0 = home-brew, 1 = IRdeo, 2 = IRdeo Remote, 3 = AnimaX, 4 = IgorPlug, 5 = NSLU2 RX:CTS2/TX:GreenLED)"); + +module_param(io, int, 0444); +MODULE_PARM_DESC(io, "I/O address base (0x3f8 or 0x2f8)"); + +/* some architectures (e.g. intel xscale) have memory mapped registers */ +module_param(iommap, bool, 0444); +MODULE_PARM_DESC(iommap, "physical base for memory mapped I/O (0 = no memory mapped io)"); + +/* + * some architectures (e.g. intel xscale) align the 8bit serial registers + * on 32bit word boundaries. + * See linux-kernel/drivers/tty/serial/8250/8250.c serial_in()/out() + */ +module_param(ioshift, int, 0444); +MODULE_PARM_DESC(ioshift, "shift I/O register offset (0 = no shift)"); + +module_param(irq, int, 0444); +MODULE_PARM_DESC(irq, "Interrupt (4 or 3)"); + +module_param(share_irq, bool, 0444); +MODULE_PARM_DESC(share_irq, "Share interrupts (0 = off, 1 = on)"); + +module_param(sense, int, 0444); +MODULE_PARM_DESC(sense, "Override autodetection of IR receiver circuit (0 = active high, 1 = active low )"); + +#ifdef CONFIG_IR_SERIAL_TRANSMITTER +module_param(txsense, bool, 0444); +MODULE_PARM_DESC(txsense, "Sense of transmitter circuit (0 = active high, 1 = active low )"); +#endif + +module_param(softcarrier, bool, 0444); +MODULE_PARM_DESC(softcarrier, "Software carrier (0 = off, 1 = on, default on)"); -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
