Hans Verkuil <hverkuil@xxxxxxxxx> wrote on Mon [2016-Oct-17 16:17:15 +0200]:
> On 09/28/2016 11:20 PM, Benoit Parrot wrote:
> > From: Nikhil Devshatwar <nikhil.nd@xxxxxx>
> >
> > Current VPE driver does not start the job until all the buffers for
> > a transaction are not queued. When running in multiple context, this might
>
> I think this should be: s/not queued/queued/, right?
Yep, will fix that.
>
> > increase the processing latency.
> >
> > Alternate solution would be to try to continue the same context as long as
> > buffers for the transaction are ready; else switch the context. This may
> > increase number of context switches but it reduces latency significantly.
> >
> > In this approach, the job_ready always succeeds as long as there are
> > buffers on the CAPTURE and OUTPUT stream. Processing may start immediately
> > as the first 2 iterations don't need extra source buffers. Shift all the
> > source buffers after each iteration and remove the oldest buffer.
> >
> > Also, with this removes the constraint of pre buffering 3 buffers before
> > call to STREAMON in case of de-interlacing.
> >
> > Signed-off-by: Nikhil Devshatwar <nikhil.nd@xxxxxx>
> > Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
> > ---
> > drivers/media/platform/ti-vpe/vpe.c | 32 ++++++++++++++++----------------
> > 1 file changed, 16 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/media/platform/ti-vpe/vpe.c b/drivers/media/platform/ti-vpe/vpe.c
> > index a0b29685fb69..9c38eff5df46 100644
> > --- a/drivers/media/platform/ti-vpe/vpe.c
> > +++ b/drivers/media/platform/ti-vpe/vpe.c
> > @@ -898,15 +898,14 @@ static struct vpe_ctx *file2ctx(struct file *file)
> > static int job_ready(void *priv)
> > {
> > struct vpe_ctx *ctx = priv;
> > - int needed = ctx->bufs_per_job;
> >
> > - if (ctx->deinterlacing && ctx->src_vbs[2] == NULL)
> > - needed += 2; /* need additional two most recent fields */
> > -
> > - if (v4l2_m2m_num_src_bufs_ready(ctx->fh.m2m_ctx) < needed)
> > - return 0;
> > -
> > - if (v4l2_m2m_num_dst_bufs_ready(ctx->fh.m2m_ctx) < needed)
> > + /*
> > + * This check is needed as this might be called directly from driver
> > + * When called by m2m framework, this will always satisy, but when
>
> typo: satisfy
Will fix.
>
> > + * called from vpe_irq, this might fail. (src stream with zero buffers)
> > + */
> > + if (v4l2_m2m_num_src_bufs_ready(ctx->fh.m2m_ctx) <= 0 ||
> > + v4l2_m2m_num_dst_bufs_ready(ctx->fh.m2m_ctx) <= 0)
> > return 0;
> >
> > return 1;
> > @@ -1116,19 +1115,20 @@ static void device_run(void *priv)
> > struct sc_data *sc = ctx->dev->sc;
> > struct vpe_q_data *d_q_data = &ctx->q_data[Q_DATA_DST];
> >
> > - if (ctx->deinterlacing && ctx->src_vbs[2] == NULL) {
> > - ctx->src_vbs[2] = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> > - WARN_ON(ctx->src_vbs[2] == NULL);
> > - ctx->src_vbs[1] = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> > - WARN_ON(ctx->src_vbs[1] == NULL);
> > - }
> > -
> > ctx->src_vbs[0] = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> > WARN_ON(ctx->src_vbs[0] == NULL);
> > ctx->dst_vb = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
> > WARN_ON(ctx->dst_vb == NULL);
> >
> > if (ctx->deinterlacing) {
> > +
> > + if (ctx->src_vbs[2] == NULL) {
> > + ctx->src_vbs[2] = ctx->src_vbs[0];
> > + WARN_ON(ctx->src_vbs[2] == NULL);
> > + ctx->src_vbs[1] = ctx->src_vbs[0];
> > + WARN_ON(ctx->src_vbs[1] == NULL);
> > + }
> > +
> > /*
> > * we have output the first 2 frames through line average, we
> > * now switch to EDI de-interlacer
> > @@ -1349,7 +1349,7 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data)
> > }
> >
> > ctx->bufs_completed++;
> > - if (ctx->bufs_completed < ctx->bufs_per_job) {
> > + if (ctx->bufs_completed < ctx->bufs_per_job && job_ready(ctx)) {
> > device_run(ctx);
> > goto handled;
> > }
> >
>
> Regards,
>
> Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
