> Patch #3.
>
> > --- a/linux/drivers/media/video/ir-kbd-i2c.c Sat Oct 03 11:23:00 2009 -0400
> > +++ b/linux/drivers/media/video/ir-kbd-i2c.c Sat Oct 03 11:27:19 2009 -0400
> > @@ -730,6 +730,7 @@
> > { "ir_video", 0 },
> > /* IR device specific entries should be added here */
> > { "ir_rx_z8f0811_haup", 0 },
> > + { "ir_rx_em78p153s_aver", 0 },
> > { }
> > };
> >
>
> I think we need to discuss this. I don't really see the point of adding
> new entries if the ir-kbd-i2c driver doesn't do anything about it. This
> makes device probing slower with no benefit. As long as you pass device
> information with all the details, the ir-kbd-i2c driver won't care
> about the device name.
>
> So the question is, where are we going with the ir-kbd-i2c driver? Are
> we happy with the current model where bridge drivers pass IR device
> information? Or do we want to move to a model where they just pass a
> device name and ir-kbd-i2c maps names to device information? In the
> latter case, it makes sense to have many i2c_device_id entries in
> ir-kbd-i2c, but in the former case it doesn't.
>
> I guess the answer depends in part on how common IR devices and remote
> controls are across adapters. If the same IR device is used on many
> adapters then it makes some sense to move the definitions into
> ir-kbd-i2c. But if devices are heavily adapter-dependent, and moving
> the definitions into ir-kbd-i2c doesn't allow for any code refactoring,
> then I don't quite see the point.
I believe when it comes to TV cards, IR RX devices and remotes are mostly
vendor-dependent thing, hardware design is usually reused in different
products of same vendor.
Did some research into Avermedia IR stuff while trying to get my M116 working.
For example during last ~10 years Avermedia had 6(?) remote unit models,
covering entire range of its TV cards (models FP/KH, HR/KJ, HV, JX, KS, KV).
Model name is clearly printed on the remote near the vendor label. There is
no clear connection or logic in how remotes are assigned to product. Analog
USB Volar AX stick has a bulky JX remote, while the more advanced hybrid
Volar HX variant of same stick has a smaller/cheaper HR/KJ remote.
How IR RX part is handled also seems to be device specific, but generally
there are several designs being repeated on different models.
Like the above mentioned 8-bit controller design, it either Elan EM78P153S
or Sonix SN8P2501A on I2C bus, or perhaps other compatible 8-bit controller:
* AVerTV Cardbus Plus (Cardbus, saa713x, SN8P2501A)
http://www.ixbt.com/monitor/images/aver-cardbus-plus/inside-front.jpg
* AVerTV USB2.0 Plus (USB, tvp5150, SN8P2501A) (not supported?)
http://www.ixbt.com/monitor/images/aver-usb20-plus/inside-front.jpg
* AVerTV MCE 116 Plus (PCI, ivtv, EM78P153S or SN8P2501A)
http://www.ixbt.com/monitor/images/aver-m116-plus/aver-m116-plus-front.jpg
* AVerTV Studio 709 (PCI, saa713x, EM78P153S)
http://www.ixbt.com/monitor/images/aver-709/aver-709-front.jpg
So different buses, different bridge drivers, same IR RX controller design.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
