em28xx WinTV dualHD in Raspbian

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi there,

I am running an updated raspbian image with kernel 4.4.23-v7+, matching
linux-headers-4.4.23-v7+_4.4.23-v7+-2_armhf from here:
https://www.niksula.hut.fi/~mhiienka/Rpi/linux-headers-rpi/ and
dvb-demod-si2168-b40-01.fw (see linuxtv-wiki).

Before the last apt-get upgrade this works great, but now, it ends up in
recognizing the device but not create /dev/dvb.

Log: 
Oct 18 23:07:59 mediapi kernel: [ 7587.975803] usb 1-1.3: new high-speed USB
device number 6 using dwc_otg
Oct 18 23:07:59 mediapi kernel: [ 7588.076796] usb 1-1.3: New USB device
found, idVendor=2040, idProduct=0265
Oct 18 23:07:59 mediapi kernel: [ 7588.076817] usb 1-1.3: New USB device
strings: Mfr=3, Product=1, SerialNumber=2
Oct 18 23:07:59 mediapi kernel: [ 7588.076842] usb 1-1.3: Product: dualHD
Oct 18 23:07:59 mediapi kernel: [ 7588.076853] usb 1-1.3: Manufacturer: HCW
Oct 18 23:07:59 mediapi kernel: [ 7588.076864] usb 1-1.3: SerialNumber:
0011540068
Oct 18 23:08:00 mediapi kernel: [ 7589.111483] media: Linux media interface:
v0.10
Oct 18 23:08:00 mediapi kernel: [ 7589.121622] Linux video capture
interface: v2.00
Oct 18 23:08:00 mediapi kernel: [ 7589.126137] em28xx: New device HCW dualHD
@ 480 Mbps (2040:0265, interface 0, class 0)
Oct 18 23:08:00 mediapi kernel: [ 7589.126157] em28xx: DVB interface 0
found: isoc
Oct 18 23:08:00 mediapi kernel: [ 7589.127012] em28xx: chip ID is em28174
Oct 18 23:08:01 mediapi kernel: [ 7590.338459] em28174 #0: EEPROM ID = 26 00
01 00, EEPROM hash = 0x7ee3cbc8
Oct 18 23:08:01 mediapi kernel: [ 7590.338482] em28174 #0: EEPROM info:
Oct 18 23:08:01 mediapi kernel: [ 7590.338496] em28174 #0:     microcode
start address = 0x0004, boot configuration = 0x01
Oct 18 23:08:01 mediapi kernel: [ 7590.346046] em28174 #0:     AC97 audio (5
sample rates)
Oct 18 23:08:01 mediapi kernel: [ 7590.346064] em28174 #0:     500mA max
power
Oct 18 23:08:01 mediapi kernel: [ 7590.346079] em28174 #0:     Table at
offset 0x27, strings=0x0e6a, 0x1888, 0x087e
Oct 18 23:08:01 mediapi kernel: [ 7590.347683] em28174 #0: Identified as
Hauppauge WinTV-dualHD DVB (card=99)
Oct 18 23:08:01 mediapi kernel: [ 7590.355143] tveeprom 4-0050: Hauppauge
model 204109, rev B2I6, serial# 11540068
Oct 18 23:08:01 mediapi kernel: [ 7590.355170] tveeprom 4-0050: tuner model
is SiLabs Si2157 (idx 186, type 4)
Oct 18 23:08:01 mediapi kernel: [ 7590.355188] tveeprom 4-0050: TV standards
PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom
0xfc)
Oct 18 23:08:01 mediapi kernel: [ 7590.355204] tveeprom 4-0050: audio
processor is None (idx 0)
Oct 18 23:08:01 mediapi kernel: [ 7590.355219] tveeprom 4-0050: has no
radio, has IR receiver, has no IR transmitter
Oct 18 23:08:01 mediapi kernel: [ 7590.355233] em28174 #0: dvb set to isoc
mode.
Oct 18 23:08:01 mediapi rsyslogd-2007: action 'action 17' suspended, next
retry is Tue Oct 18 23:08:31 2016 [try http://www.rsyslog.com/e/2007 ]
Oct 18 23:08:01 mediapi kernel: [ 7590.357918] usbcore: registered new
interface driver em28xx
Oct 18 23:08:01 mediapi kernel: [ 7590.369200] em28xx_dvb: disagrees about
version of symbol dvb_dmxdev_init
Oct 18 23:08:01 mediapi kernel: [ 7590.369228] em28xx_dvb: Unknown symbol
dvb_dmxdev_init (err -22)
[?] (multiple ?disagrees? and ?unknown symbol?)
ct 18 23:08:01 mediapi kernel: [ 7590.417607] em28174 #0: Registering input
extension
Oct 18 23:08:01 mediapi kernel: [ 7590.455841] Registered IR keymap
rc-hauppauge
Oct 18 23:08:01 mediapi kernel: [ 7590.456798] input: em28xx IR (em28174 #0)
as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0/input0
Oct 18 23:08:01 mediapi kernel: [ 7590.457059] rc rc0: em28xx IR (em28174
#0) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0
Oct 18 23:08:01 mediapi kernel: [ 7590.457715] em28174 #0: Input extension
successfully initalized
Oct 18 23:08:01 mediapi kernel: [ 7590.457734] em28xx: Registered (Em28xx
Input Extension) extension


Before it stopped working, I have executed the apt upgrade, installed the
new kernel header and run 
git clone git://linuxtv.org/media_build.git
cd media_build 
./build
sudo make install

No errors appeared.

What I am doing wrong? The last git clone was approx. in August.


2nd question: Is there anything new in supporting both tuners of the dualHD
stick?


Thanks,
Patrick


--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux