Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
drivers/media/radio/wl128x/fmdrv_common.c | 30 +++++++++++++-----------------
drivers/media/radio/wl128x/fmdrv_rx.c | 8 ++++----
2 files changed, 17 insertions(+), 21 deletions(-)
diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c
index 642b89c66bcb..6f254e80ffa6 100644
--- a/drivers/media/radio/wl128x/fmdrv_common.c
+++ b/drivers/media/radio/wl128x/fmdrv_common.c
@@ -230,10 +230,10 @@ inline void dump_rx_skb_data(struct sk_buff *skb)
struct fm_event_msg_hdr *evt_hdr;
evt_hdr = (struct fm_event_msg_hdr *)skb->data;
- printk(KERN_INFO ">> hdr:%02x len:%02x sts:%02x numhci:%02x "
- "opcode:%02x type:%s dlen:%02x", evt_hdr->hdr, evt_hdr->len,
- evt_hdr->status, evt_hdr->num_fm_hci_cmds, evt_hdr->op,
- (evt_hdr->rd_wr) ? "RD" : "WR", evt_hdr->dlen);
+ printk(KERN_INFO ">> hdr:%02x len:%02x sts:%02x numhci:%02x opcode:%02x type:%s dlen:%02x",
+ evt_hdr->hdr, evt_hdr->len,
+ evt_hdr->status, evt_hdr->num_fm_hci_cmds, evt_hdr->op,
+ (evt_hdr->rd_wr) ? "RD" : "WR", evt_hdr->dlen);
len_org = skb->len - FM_EVT_MSG_HDR_SIZE;
if (len_org > 0) {
@@ -271,9 +271,9 @@ static void recv_tasklet(unsigned long arg)
/* Process all packets in the RX queue */
while ((skb = skb_dequeue(&fmdev->rx_q))) {
if (skb->len < sizeof(struct fm_event_msg_hdr)) {
- fmerr("skb(%p) has only %d bytes, "
- "at least need %zu bytes to decode\n", skb,
- skb->len, sizeof(struct fm_event_msg_hdr));
+ fmerr("skb(%p) has only %d bytes, at least need %zu bytes to decode\n",
+ skb,
+ skb->len, sizeof(struct fm_event_msg_hdr));
kfree_skb(skb);
continue;
}
@@ -472,8 +472,7 @@ int fmc_send_cmd(struct fmdev *fmdev, u8 fm_op, u16 type, void *payload,
if (!wait_for_completion_timeout(&fmdev->maintask_comp,
FM_DRV_TX_TIMEOUT)) {
- fmerr("Timeout(%d sec),didn't get reg"
- "completion signal from RX tasklet\n",
+ fmerr("Timeout(%d sec),didn't get regcompletion signal from RX tasklet\n",
jiffies_to_msecs(FM_DRV_TX_TIMEOUT) / 1000);
return -ETIMEDOUT;
}
@@ -523,8 +522,7 @@ static inline int check_cmdresp_status(struct fmdev *fmdev,
fm_evt_hdr = (void *)(*skb)->data;
if (fm_evt_hdr->status != 0) {
- fmerr("irq: opcode %x response status is not zero "
- "Initiating irq recovery process\n",
+ fmerr("irq: opcode %x response status is not zero Initiating irq recovery process\n",
fm_evt_hdr->op);
mod_timer(&fmdev->irq_info.timer, jiffies + FM_DRV_TX_TIMEOUT);
@@ -564,8 +562,7 @@ static void int_timeout_handler(unsigned long data)
* reset stage index & retry count values */
fmirq->stage = 0;
fmirq->retry = 0;
- fmerr("Recovery action failed during"
- "irq processing, max retry reached\n");
+ fmerr("Recovery action failed duringirq processing, max retry reached\n");
return;
}
fm_irq_call_stage(fmdev, FM_SEND_INTMSK_CMD_IDX);
@@ -1516,14 +1513,13 @@ int fmc_prepare(struct fmdev *fmdev)
if (!wait_for_completion_timeout(&wait_for_fmdrv_reg_comp,
FM_ST_REG_TIMEOUT)) {
- fmerr("Timeout(%d sec), didn't get reg "
- "completion signal from ST\n",
+ fmerr("Timeout(%d sec), didn't get reg completion signal from ST\n",
jiffies_to_msecs(FM_ST_REG_TIMEOUT) / 1000);
return -ETIMEDOUT;
}
if (fmdev->streg_cbdata != 0) {
- fmerr("ST reg comp CB called with error "
- "status %d\n", fmdev->streg_cbdata);
+ fmerr("ST reg comp CB called with error status %d\n",
+ fmdev->streg_cbdata);
return -EAGAIN;
}
diff --git a/drivers/media/radio/wl128x/fmdrv_rx.c b/drivers/media/radio/wl128x/fmdrv_rx.c
index cfaeb2417fbb..e7455f82fadc 100644
--- a/drivers/media/radio/wl128x/fmdrv_rx.c
+++ b/drivers/media/radio/wl128x/fmdrv_rx.c
@@ -120,8 +120,8 @@ int fm_rx_set_freq(struct fmdev *fmdev, u32 freq)
curr_frq_in_khz = (fmdev->rx.region.bot_freq + ((u32)curr_frq * FM_FREQ_MUL));
if (curr_frq_in_khz != freq) {
- pr_info("Frequency is set to (%d) but "
- "requested freq is (%d)\n", curr_frq_in_khz, freq);
+ pr_info("Frequency is set to (%d) but requested freq is (%d)\n",
+ curr_frq_in_khz, freq);
}
/* Update local cache */
@@ -390,8 +390,8 @@ int fm_rx_set_region(struct fmdev *fmdev, u8 region_to_set)
new_frq = fmdev->rx.region.top_freq;
if (new_frq) {
- fmdbg("Current freq is not within band limit boundary,"
- "switching to %d KHz\n", new_frq);
+ fmdbg("Current freq is not within band limit boundary,switching to %d KHz\n",
+ new_frq);
/* Current RX frequency is not in range. So, update it */
ret = fm_rx_set_freq(fmdev, new_frq);
}
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
