Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.
As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.
So, join those continuation lines.
The patch was generated via the script below, and manually
adjusted if needed.
</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;
$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");
print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
drivers/media/pci/cx88/cx88-alsa.c | 15 ++++++---------
drivers/media/pci/cx88/cx88-cards.c | 14 ++++++--------
drivers/media/pci/cx88/cx88-dsp.c | 12 ++++++------
drivers/media/pci/cx88/cx88-dvb.c | 6 ++----
drivers/media/pci/cx88/cx88-i2c.c | 3 +--
drivers/media/pci/cx88/cx88-mpeg.c | 15 +++++++--------
drivers/media/pci/cx88/cx88-tvaudio.c | 6 ++----
drivers/media/pci/cx88/cx88-video.c | 4 ++--
8 files changed, 32 insertions(+), 43 deletions(-)
diff --git a/drivers/media/pci/cx88/cx88-alsa.c b/drivers/media/pci/cx88/cx88-alsa.c
index 723f06462104..c2efd14293bf 100644
--- a/drivers/media/pci/cx88/cx88-alsa.c
+++ b/drivers/media/pci/cx88/cx88-alsa.c
@@ -120,9 +120,7 @@ MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>");
MODULE_LICENSE("GPL");
MODULE_VERSION(CX88_VERSION);
-MODULE_SUPPORTED_DEVICE("{{Conexant,23881},"
- "{{Conexant,23882},"
- "{{Conexant,23883}");
+MODULE_SUPPORTED_DEVICE("{{Conexant,23881},{{Conexant,23882},{{Conexant,23883}");
static unsigned int debug;
module_param(debug,int,0644);
MODULE_PARM_DESC(debug,"enable debug messages");
@@ -154,8 +152,8 @@ static int _cx88_start_audio_dma(snd_cx88_card_t *chip)
cx_write(MO_AUDD_GPCNTRL, GP_COUNT_CONTROL_RESET);
atomic_set(&chip->count, 0);
- dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d "
- "byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start + 8)>>1,
+ dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d byte buffer\n",
+ buf->bpl, cx_read(audio_ch->cmds_start + 8)>>1,
chip->num_periods, buf->bpl * chip->num_periods);
/* Enables corresponding bits at AUD_INT_STAT */
@@ -425,8 +423,7 @@ static int snd_cx88_pcm_open(struct snd_pcm_substream *substream)
int err;
if (!chip) {
- printk(KERN_ERR "BUG: cx88 can't find device struct."
- " Can't proceed with open\n");
+ printk(KERN_ERR "BUG: cx88 can't find device struct. Can't proceed with open\n");
return -ENODEV;
}
@@ -914,8 +911,8 @@ static int snd_cx88_create(struct snd_card *card, struct pci_dev *pci,
/* print pci info */
pci_read_config_byte(pci, PCI_LATENCY_TIMER, &pci_lat);
- dprintk(1,"ALSA %s/%i: found at %s, rev: %d, irq: %d, "
- "latency: %d, mmio: 0x%llx\n", core->name, devno,
+ dprintk(1,"ALSA %s/%i: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+ core->name, devno,
pci_name(pci), pci->revision, pci->irq,
pci_lat, (unsigned long long)pci_resource_start(pci,0));
diff --git a/drivers/media/pci/cx88/cx88-cards.c b/drivers/media/pci/cx88/cx88-cards.c
index 8f2556ec3971..31295b36dafc 100644
--- a/drivers/media/pci/cx88/cx88-cards.c
+++ b/drivers/media/pci/cx88/cx88-cards.c
@@ -2847,8 +2847,7 @@ static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
break;
}
- info_printk(core, "Leadtek Winfast 2000XP Expert config: "
- "tuner=%d, eeprom[0]=0x%02x\n",
+ info_printk(core, "Leadtek Winfast 2000XP Expert config: tuner=%d, eeprom[0]=0x%02x\n",
core->board.tuner_type, eeprom_data[0]);
}
@@ -3107,8 +3106,8 @@ static void dvico_fusionhdtv_hybrid_init(struct cx88_core *core)
msg.len = (i != 12 ? 5 : 2);
err = i2c_transfer(&core->i2c_adap, &msg, 1);
if (err != 1) {
- warn_printk(core, "dvico_fusionhdtv_hybrid_init buf %d "
- "failed (err = %d)!\n", i, err);
+ warn_printk(core, "dvico_fusionhdtv_hybrid_init buf %d failed (err = %d)!\n",
+ i, err);
return;
}
}
@@ -3284,8 +3283,7 @@ static void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
"%s: version might help as well.\n",
core->name,core->name,core->name,core->name);
}
- err_printk(core, "Here is a list of valid choices for the card=<n> "
- "insmod option:\n");
+ err_printk(core, "Here is a list of valid choices for the card=<n> insmod option:\n");
for (i = 0; i < ARRAY_SIZE(cx88_boards); i++)
printk(KERN_ERR "%s: card=%d -> %s\n",
core->name, i, cx88_boards[i].name);
@@ -3510,8 +3508,8 @@ static void cx88_card_setup(struct cx88_core *core)
for (i = 0; i < ARRAY_SIZE(buffer); i++)
if (2 != i2c_master_send(&core->i2c_client,
buffer[i],2))
- warn_printk(core, "Unable to enable "
- "tuner(%i).\n", i);
+ warn_printk(core, "Unable to enable tuner(%i).\n",
+ i);
}
break;
case CX88_BOARD_MSI_TVANYWHERE_MASTER:
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
index a9907265ff66..7fafd132ccaf 100644
--- a/drivers/media/pci/cx88/cx88-dsp.c
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -186,8 +186,8 @@ static s32 detect_a2_a2m_eiaj(struct cx88_core *core, s16 x[], u32 N)
dual = freq_magnitude(x, N, dual_freq);
noise = noise_magnitude(x, N, FREQ_NOISE_START, FREQ_NOISE_END);
- dprintk(1, "detect a2/a2m/eiaj: carrier=%d, stereo=%d, dual=%d, "
- "noise=%d\n", carrier, stereo, dual, noise);
+ dprintk(1, "detect a2/a2m/eiaj: carrier=%d, stereo=%d, dual=%d, noise=%d\n",
+ carrier, stereo, dual, noise);
if (stereo > dual)
ret = V4L2_TUNER_SUB_STEREO;
@@ -222,8 +222,8 @@ static s32 detect_btsc(struct cx88_core *core, s16 x[], u32 N)
s32 sap = freq_magnitude(x, N, FREQ_BTSC_SAP);
s32 dual_ref = freq_magnitude(x, N, FREQ_BTSC_DUAL_REF);
s32 dual = freq_magnitude(x, N, FREQ_BTSC_DUAL);
- dprintk(1, "detect btsc: dual_ref=%d, dual=%d, sap_ref=%d, sap=%d"
- "\n", dual_ref, dual, sap_ref, sap);
+ dprintk(1, "detect btsc: dual_ref=%d, dual=%d, sap_ref=%d, sap=%d\n",
+ dual_ref, dual, sap_ref, sap);
/* FIXME: Currently not supported */
return UNSET;
}
@@ -241,8 +241,8 @@ static s16 *read_rds_samples(struct cx88_core *core, u32 *N)
u32 current_address = cx_read(srch->ptr1_reg);
u32 offset = (current_address - srch->fifo_start + bpl);
- dprintk(1, "read RDS samples: current_address=%08x (offset=%08x), "
- "sample_count=%d, aud_intstat=%08x\n", current_address,
+ dprintk(1, "read RDS samples: current_address=%08x (offset=%08x), sample_count=%d, aud_intstat=%08x\n",
+ current_address,
current_address - srch->fifo_start, sample_count,
cx_read(MO_AUD_INTSTAT));
diff --git a/drivers/media/pci/cx88/cx88-dvb.c b/drivers/media/pci/cx88/cx88-dvb.c
index ac2392d8887a..fe5fd2a4650b 100644
--- a/drivers/media/pci/cx88/cx88-dvb.c
+++ b/drivers/media/pci/cx88/cx88-dvb.c
@@ -625,8 +625,7 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
return -EINVAL;
if (!fe0->dvb.frontend) {
- printk(KERN_ERR "%s/2: dvb frontend not attached. "
- "Can't attach xc3028\n",
+ printk(KERN_ERR "%s/2: dvb frontend not attached. Can't attach xc3028\n",
dev->core->name);
return -EINVAL;
}
@@ -665,8 +664,7 @@ static int attach_xc4000(struct cx8802_dev *dev, struct xc4000_config *cfg)
return -EINVAL;
if (!fe0->dvb.frontend) {
- printk(KERN_ERR "%s/2: dvb frontend not attached. "
- "Can't attach xc4000\n",
+ printk(KERN_ERR "%s/2: dvb frontend not attached. Can't attach xc4000\n",
dev->core->name);
return -EINVAL;
}
diff --git a/drivers/media/pci/cx88/cx88-i2c.c b/drivers/media/pci/cx88/cx88-i2c.c
index cf2d69615838..8ee9b9802683 100644
--- a/drivers/media/pci/cx88/cx88-i2c.c
+++ b/drivers/media/pci/cx88/cx88-i2c.c
@@ -45,8 +45,7 @@ MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
static unsigned int i2c_udelay = 5;
module_param(i2c_udelay, int, 0644);
-MODULE_PARM_DESC(i2c_udelay,"i2c delay at insmod time, in usecs "
- "(should be 5 or higher). Lower value means higher bus speed.");
+MODULE_PARM_DESC(i2c_udelay,"i2c delay at insmod time, in usecs (should be 5 or higher). Lower value means higher bus speed.");
#define dprintk(level,fmt, arg...) if (i2c_debug >= level) \
printk(KERN_DEBUG "%s: " fmt, core->name , ## arg)
diff --git a/drivers/media/pci/cx88/cx88-mpeg.c b/drivers/media/pci/cx88/cx88-mpeg.c
index 245357adbc25..86b46b62d985 100644
--- a/drivers/media/pci/cx88/cx88-mpeg.c
+++ b/drivers/media/pci/cx88/cx88-mpeg.c
@@ -401,8 +401,8 @@ static int cx8802_init_common(struct cx8802_dev *dev)
dev->pci_rev = dev->pci->revision;
pci_read_config_byte(dev->pci, PCI_LATENCY_TIMER, &dev->pci_lat);
- printk(KERN_INFO "%s/2: found at %s, rev: %d, irq: %d, "
- "latency: %d, mmio: 0x%llx\n", dev->core->name,
+ printk(KERN_INFO "%s/2: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+ dev->core->name,
pci_name(dev->pci), dev->pci_rev, dev->pci->irq,
dev->pci_lat,(unsigned long long)pci_resource_start(dev->pci,0));
@@ -690,8 +690,8 @@ int cx8802_unregister_driver(struct cx8802_driver *drv)
list_del(&d->drvlist);
kfree(d);
} else
- printk(KERN_ERR "%s/2: cx8802 driver remove "
- "failed (%d)\n", dev->core->name, err);
+ printk(KERN_ERR "%s/2: cx8802 driver remove failed (%d)\n",
+ dev->core->name, err);
}
mutex_unlock(&dev->core->lock);
@@ -768,8 +768,7 @@ static void cx8802_remove(struct pci_dev *pci_dev)
struct cx8802_driver *drv, *tmp;
int err;
- printk(KERN_WARNING "%s/2: Trying to remove cx8802 driver "
- "while cx8802 sub-drivers still loaded?!\n",
+ printk(KERN_WARNING "%s/2: Trying to remove cx8802 driver while cx8802 sub-drivers still loaded?!\n",
dev->core->name);
list_for_each_entry_safe(drv, tmp, &dev->drvlist, drvlist) {
@@ -777,8 +776,8 @@ static void cx8802_remove(struct pci_dev *pci_dev)
if (err == 0) {
list_del(&drv->drvlist);
} else
- printk(KERN_ERR "%s/2: cx8802 driver remove "
- "failed (%d)\n", dev->core->name, err);
+ printk(KERN_ERR "%s/2: cx8802 driver remove failed (%d)\n",
+ dev->core->name, err);
kfree(drv);
}
}
diff --git a/drivers/media/pci/cx88/cx88-tvaudio.c b/drivers/media/pci/cx88/cx88-tvaudio.c
index 6bbce6ad6295..dd8e6f324204 100644
--- a/drivers/media/pci/cx88/cx88-tvaudio.c
+++ b/drivers/media/pci/cx88/cx88-tvaudio.c
@@ -62,8 +62,7 @@ MODULE_PARM_DESC(always_analog,"force analog audio out");
static unsigned int radio_deemphasis;
module_param(radio_deemphasis,int,0644);
-MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, "
- "0=None, 1=50us (elsewhere), 2=75us (USA)");
+MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, 0=None, 1=50us (elsewhere), 2=75us (USA)");
#define dprintk(fmt, arg...) if (audio_debug) \
printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)
@@ -976,8 +975,7 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual)
}
if (UNSET != ctl) {
- dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x "
- "[status=0x%x,ctl=0x%x,vol=0x%x]\n",
+ dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x [status=0x%x,ctl=0x%x,vol=0x%x]\n",
mask, ctl, cx_read(AUD_STATUS),
cx_read(AUD_CTL), cx_sread(SHADOW_AUD_VOL_CTL));
cx_andor(AUD_CTL, mask, ctl);
diff --git a/drivers/media/pci/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c
index d83eb3b10f54..418e2db40b39 100644
--- a/drivers/media/pci/cx88/cx88-video.c
+++ b/drivers/media/pci/cx88/cx88-video.c
@@ -1307,8 +1307,8 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
/* print pci info */
dev->pci_rev = pci_dev->revision;
pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
- printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, "
- "latency: %d, mmio: 0x%llx\n", core->name,
+ printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+ core->name,
pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
