Due to the 80-cols checkpatch warnings, several strings
were broken into multiple lines. This is not considered
a good practice anymore, as it makes harder to grep for
strings at the source code. So, join those continuation
lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c | 10 +++-------
drivers/media/usb/dvb-usb-v2/mxl111sf.c | 9 +++------
2 files changed, 6 insertions(+), 13 deletions(-)
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c
index 283495c84ba3..ea39056412c5 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf-i2c.c
@@ -666,8 +666,7 @@ static int mxl111sf_i2c_hw_xfer_msg(struct mxl111sf_state *state,
if (rd_status[i] == 0x04) {
if (i < 7) {
- mxl_i2c("i2c fifo empty!"
- " @ %d", i);
+ mxl_i2c("i2c fifo empty! @ %d", i);
msg->buf[(index*8)+i] =
i2c_r_data[(i*3)+1];
/* read again */
@@ -692,8 +691,7 @@ static int mxl111sf_i2c_hw_xfer_msg(struct mxl111sf_state *state,
}
goto stop_copy;
} else {
- mxl_i2c("readagain "
- "ERROR!");
+ mxl_i2c("readagain ERROR!");
}
} else {
msg->buf[(index*8)+i] =
@@ -827,9 +825,7 @@ int mxl111sf_i2c_xfer(struct i2c_adapter *adap,
mxl111sf_i2c_hw_xfer_msg(state, &msg[i]) :
mxl111sf_i2c_sw_xfer_msg(state, &msg[i]);
if (mxl_fail(ret)) {
- mxl_debug_adv("failed with error %d on i2c "
- "transaction %d of %d, %sing %d bytes "
- "to/from 0x%02x", ret, i+1, num,
+ mxl_debug_adv("failed with error %d on i2c transaction %d of %d, %sing %d bytes to/from 0x%02x", ret, i+1, num,
(msg[i].flags & I2C_M_RD) ?
"read" : "writ",
msg[i].len, msg[i].addr);
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
index 5d676b533a3a..58da619b7c59 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
@@ -29,8 +29,7 @@
int dvb_usb_mxl111sf_debug;
module_param_named(debug, dvb_usb_mxl111sf_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level "
- "(1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able)).");
+MODULE_PARM_DESC(debug, "set debugging level (1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able)).");
static int dvb_usb_mxl111sf_isoc;
module_param_named(isoc, dvb_usb_mxl111sf_isoc, int, 0644);
@@ -137,8 +136,7 @@ int mxl111sf_write_reg_mask(struct mxl111sf_state *state,
#if 1
/* dont know why this usually errors out on the first try */
if (mxl_fail(ret))
- pr_err("error writing addr: 0x%02x, mask: 0x%02x, "
- "data: 0x%02x, retrying...", addr, mask, data);
+ pr_err("error writing addr: 0x%02x, mask: 0x%02x, data: 0x%02x, retrying...", addr, mask, data);
ret = mxl111sf_read_reg(state, addr, &val);
#endif
@@ -946,8 +944,7 @@ static int mxl111sf_init(struct dvb_usb_device *d)
case 138001:
break;
default:
- printk(KERN_WARNING "%s: warning: "
- "unknown hauppauge model #%d\n",
+ printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n",
__func__, state->tv.model);
}
#endif
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
