Preliminary version of patch adding support for AVerTV MCE 116 Plus remote.
This board has an IR sensor is connected to EM78P153S, general purpose 8-bit
microcontroller with a 1024 × 13 bits of OTP-ROM. According to i2cdetect, it is
sitting on address 0x40.
Patch allows ir-kbd-i2c to probe cx2341x boards for this address. Manually
loading ir-kbd-i2c now detects remote, every key is working as expected.
As I understand, current I2C/probing code is being redesigned/refactored. Sheer
amount of #ifdefs for every second kernel version is making my eyes bleed, so
please somebody involved check if patch is ok.
Should I also add the 0x40 address to addr_list[] in ivtv-i2c.c? How to point
ivtv to this remote and autoload ir-kbd-i2c?
diff --git a/linux/drivers/media/video/ir-kbd-i2c.c b/linux/drivers/media/video/ir-kbd-i2c.c
--- a/linux/drivers/media/video/ir-kbd-i2c.c
+++ b/linux/drivers/media/video/ir-kbd-i2c.c
@@ -461,7 +461,7 @@
}
break;
case 0x40:
- name = "AVerMedia Cardbus remote";
+ name = "AVerMedia RM-FP/RM-KH remote";
ir->get_key = get_key_avermedia_cardbus;
ir_type = IR_TYPE_OTHER;
ir_codes = &ir_codes_avermedia_cardbus_table;
@@ -706,8 +706,12 @@
ir_attach(adap, msg.addr, 0, 0);
}
- /* Special case for AVerMedia Cardbus remote */
- if (adap->id == I2C_HW_SAA7134) {
+ /* Special case for AVerMedia remotes:
+ * AVerTV Hybrid+FM Cardbus
+ * AVerTV MCE 116 Plus
+ * probably others with RM-FP, RM-KH remotes and microcontroller
+ chip @ 0x40 */
+ if ((adap->id == I2C_HW_SAA7134) || (adap->id == I2C_HW_B_CX2341X)) {
unsigned char subaddr, data;
struct i2c_msg msg[] = { { .addr = 0x40, .flags = 0,
.buf = &subaddr, .len = 1},
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
