Re: [PATCH 2/3] ARM: dts: gose: add HDMI input

[Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>]

On Friday 30 Sep 2016 15:00:59 Geert Uytterhoeven wrote:
> On Fri, Sep 30, 2016 at 2:40 PM, Laurent Pinchart wrote:
> >> --- a/arch/arm/boot/dts/r8a7793-gose.dts
> >> +++ b/arch/arm/boot/dts/r8a7793-gose.dts
> >> @@ -374,6 +374,11 @@
> >>               groups = "audio_clk_a";
> >>               function = "audio_clk";
> >>       };
> >> +
> >> +     vin0_pins: vin0 {
> >> +             groups = "vin0_data24", "vin0_sync", "vin0_clkenb",
> >> "vin0_clk";
> >> +             function = "vin0";
> >> +     };
> >>  };
> >>  
> >>  &ether {
> >> @@ -531,6 +536,21 @@
> >>               };
> >>       };
> >> 
> >> +     hdmi-in@4c {
> >> +             compatible = "adi,adv7612";
> >> +             reg = <0x4c>;
> >> +             interrupt-parent = <&gpio1>;
> >> +             interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
> > 
> > Isn't the interrupt signal connected to GP4_2 ?
> 
> No idea about Gose, but on Koelsch it is (hence koelsch DTS is wrong??)

I believe so. I don't have a Koelsch board anymore so I can't test that. 
Niklas, do you have a Koelsch on which you could confirm the IRQ number ?

-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html