Re: [RFC PATCH 6/7] atmel-isi: remove dependency of the soc-camera framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 9/21/2016 15:04, Hans Verkuil wrote:
On 08/18/2016 07:53 AM, Wu, Songjun wrote:
Hi Hans,

Thank you for the patch.

On 8/17/2016 14:29, Hans Verkuil wrote:
From: Hans Verkuil <hans.verkuil@xxxxxxxxx>

This patch converts the atmel-isi driver from a soc-camera driver to a driver
that is stand-alone.

Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
 drivers/media/platform/soc_camera/Kconfig     |    3 +-
 drivers/media/platform/soc_camera/atmel-isi.c | 1216 +++++++++++++++----------
 2 files changed, 721 insertions(+), 498 deletions(-)

diff --git a/drivers/media/platform/soc_camera/Kconfig b/drivers/media/platform/soc_camera/Kconfig
index 39f6641..f74e358 100644
--- a/drivers/media/platform/soc_camera/Kconfig
+++ b/drivers/media/platform/soc_camera/Kconfig
@@ -54,9 +54,8 @@ config VIDEO_SH_MOBILE_CEU

 config VIDEO_ATMEL_ISI
 	tristate "ATMEL Image Sensor Interface (ISI) support"
-	depends on VIDEO_DEV && SOC_CAMERA
+	depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF && HAS_DMA
 	depends on ARCH_AT91 || COMPILE_TEST
-	depends on HAS_DMA
 	select VIDEOBUF2_DMA_CONTIG
 	---help---
 	  This module makes the ATMEL Image Sensor Interface available
diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
index 30211f6..9947acb 100644
--- a/drivers/media/platform/soc_camera/atmel-isi.c
+++ b/drivers/media/platform/soc_camera/atmel-isi.c


+
 static int atmel_isi_probe(struct platform_device *pdev)
 {
 	int irq;
 	struct atmel_isi *isi;
+	struct vb2_queue *q;
 	struct resource *regs;
 	int ret, i;
-	struct soc_camera_host *soc_host;

 	isi = devm_kzalloc(&pdev->dev, sizeof(struct atmel_isi), GFP_KERNEL);
 	if (!isi) {
@@ -1044,20 +1216,65 @@ static int atmel_isi_probe(struct platform_device *pdev)
 		return ret;

 	isi->active = NULL;
-	spin_lock_init(&isi->lock);
+	isi->dev = &pdev->dev;
+	mutex_init(&isi->lock);
+	spin_lock_init(&isi->irqlock);
 	INIT_LIST_HEAD(&isi->video_buffer_list);
 	INIT_LIST_HEAD(&isi->dma_desc_head);

+	q = &isi->queue;
+
+	/* Initialize the top-level structure */
+	ret = v4l2_device_register(&pdev->dev, &isi->v4l2_dev);
+	if (ret)
+		return ret;
+
+	isi->vdev = video_device_alloc();
+	if (isi->vdev == NULL) {
+		ret = -ENOMEM;
+		goto err_vdev_alloc;
+	}
If video device is unregistered, the ISI driver must be reloaded when
registering a new video device.
So '*vdev' can be replaced by 'vdev', or move the code above to
isi_graph_notify_complete.

I'm afraid I don't understand what you mean. Can you clarify?


If the sensor driver is defined as a module, e.g. ov7670.ko. 'insmod ov7670.ko' and 'rmmod ov7670', video_device_release will be called, and '*vdev' will be freed, when 'insmod ov7670.ko' is run again, the error will will occur, if the code above is moved to isi_graph_notify_complete, there will be no error.

Regards,

	Hans


+
+	/* video node */
+	isi->vdev->fops = &isi_fops;
+	isi->vdev->v4l2_dev = &isi->v4l2_dev;
+	isi->vdev->queue = &isi->queue;
+	strlcpy(isi->vdev->name, KBUILD_MODNAME, sizeof(isi->vdev->name));
+	isi->vdev->release = video_device_release;
+	isi->vdev->ioctl_ops = &isi_ioctl_ops;
+	isi->vdev->lock = &isi->lock;
+	isi->vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
+		V4L2_CAP_READWRITE;
+	video_set_drvdata(isi->vdev, isi);
+
+	/* buffer queue */
+	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	q->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF;
+	q->lock = &isi->lock;
+	q->drv_priv = isi;
+	q->buf_struct_size = sizeof(struct frame_buffer);
+	q->ops = &isi_video_qops;
+	q->mem_ops = &vb2_dma_contig_memops;
+	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	q->min_buffers_needed = 2;
+	q->dev = &pdev->dev;
+
+	ret = vb2_queue_init(q);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to initialize VB2 queue\n");
+		goto err_vb2_queue;
+	}

Regards,
	Songjun Wu


--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux