From: Hans Verkuil <hverkuil@xxxxxxxxx>
Add support in the dts for the HDMI input. Based on the Lager dts
patch from Ulrich Hecht.
Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
[uli: removed "renesas," prefixes from pfc nodes]
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 41 +++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index f8a7d09..45b8b5f 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -393,6 +393,11 @@
function = "usb1";
};
+ vin0_pins: vin0 {
+ groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+ function = "vin0";
+ };
+
vin1_pins: vin1 {
groups = "vin1_data8", "vin1_clk";
function = "vin1";
@@ -596,6 +601,21 @@
};
};
+ hdmi-in@4c {
+ compatible = "adi,adv7612";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ remote = <&vin0>;
+ default-input = <0>;
+
+ port {
+ adv7612: endpoint {
+ remote-endpoint = <&vin0ep>;
+ };
+ };
+ };
+
eeprom@50 {
compatible = "renesas,24c02";
reg = <0x50>;
@@ -672,6 +692,27 @@
cpu0-supply = <&vdd_dvfs>;
};
+/* HDMI video input */
+&vin0 {
+ status = "okay";
+ pinctrl-0 = <&vin0_pins>;
+ pinctrl-names = "default";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vin0ep: endpoint {
+ remote-endpoint = <&adv7612>;
+ bus-width = <24>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ data-active = <1>;
+ };
+ };
+};
+
/* composite video input */
&vin1 {
status = "okay";
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
