From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
Obtain the correct timings based on the VIC code from the AVI InfoFrame.
It does a sanity check to see if at least the measured width and height
are in line with what the VIC code reports. If not, then use the timings
instead of the VIC code (as per the CEA-861 spec).
Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
---
drivers/media/i2c/adv7604.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 4003831..1ab7572 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -1566,10 +1566,24 @@ static int adv76xx_query_dv_timings(struct v4l2_subdev *sd,
V4L2_DV_INTERLACED : V4L2_DV_PROGRESSIVE;
if (is_digital_input(sd)) {
+ bool hdmi_signal = hdmi_read(sd, 0x05) & 0x80;
+ u8 vic = 0;
+ u32 w, h;
+
+ w = hdmi_read16(sd, 0x07, info->linewidth_mask);
+ h = hdmi_read16(sd, 0x09, info->field0_height_mask);
+
+ if (hdmi_signal && (io_read(sd, 0x60) & 1))
+ vic = infoframe_read(sd, 0x04);
+
+ if (vic && v4l2_find_dv_timings_cea861_vic(timings, vic) &&
+ bt->width == w && bt->height == h)
+ goto found;
+
timings->type = V4L2_DV_BT_656_1120;
- bt->width = hdmi_read16(sd, 0x07, info->linewidth_mask);
- bt->height = hdmi_read16(sd, 0x09, info->field0_height_mask);
+ bt->width = w;
+ bt->height = h;
bt->pixelclock = info->read_hdmi_pixelclock(sd);
bt->hfrontporch = hdmi_read16(sd, 0x20, info->hfrontporch_mask);
bt->hsync = hdmi_read16(sd, 0x22, info->hsync_mask);
--
2.8.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
