Hi, On 08/18/16 13:22, Peter Ujfalusi wrote: > The dmaengine driver for sDMA now have support for interleaved transfer. > This trasnfer type was open coded with the legacy omap-dma API, but now > we can move it to dmaengine. > > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> > --- > The dmaengine driver for sDMA now have support for interleaved transfer. > This trasnfer type was open coded with the legacy omap-dma API, but now > we can move it to dmaengine. > > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx> > --- > Hi, > > I do not have access to any hardware where I could test if the conversion works > correctly. I think it should. The dmaengine part looks fine to me - not that > this means too much as I have written it ;) > Based on debugging the code with starring at it I think the old and the new way > would end up setting up the DMA in a same way. However the dmaengine driver will > set CSDP_DST_PACKED | CSDP_SRC_PACKED. > > Laurent: would you be able to test this? I managed to test the dmaengine interleaved with: https://github.com/omap-audio/linux-audio/blob/peter/linux-next-wip/drivers/misc/ovv_dmaengine.c Basically I have ripped the relevant code from omap_vout_vrfb.c, added the dmaengine implementation. Then: 0. allocate and init the three buffers 1. copy from buffer0 to buffer1 with legacy omap-dma 2. copy from buffer0 to buffer2 with legacy omap-dma 3. compare buffer1 and buffer2 4. reinit buffer2 5. copy from buffer0 to buffer2 with dmaengine 6. compare buffer1 and buffer2 The result is: [ 100.578943] ovv_init: ENTER [ 100.626871] ovv_setup_buffers: pattern is good [ 100.774526] ovv_setup_buffers: pattern is good [ 100.911386] ovv_setup_buffers: pattern is good [ 101.136397] ovv_get_legacy_dma: got channel: 6 [ 101.140859] ovv_get_dmaengine_dma: got channel [ 101.160475] omap_vout_vrfb_dma_tx_callback: ENTER [ 101.180357] omap_vout_vrfb_dma_tx_callback: ENTER [ 101.470146] ovv_init: Legacy vs Legacy: they are identical [ 101.595408] ovv_init: pattern is good [ 101.599104] dmaengine_callback: ENTER [ 101.888070] ovv_init: Legacy vs dmaengine: they are identical -- Péter > > Regards, > Peter > > drivers/media/platform/omap/omap_vout_vrfb.c | 133 ++++++++++++++++----------- > drivers/media/platform/omap/omap_voutdef.h | 6 +- > 2 files changed, 83 insertions(+), 56 deletions(-) > > diff --git a/drivers/media/platform/omap/omap_vout_vrfb.c b/drivers/media/platform/omap/omap_vout_vrfb.c > index b8638e4e1627..957ff7621652 100644 > --- a/drivers/media/platform/omap/omap_vout_vrfb.c > +++ b/drivers/media/platform/omap/omap_vout_vrfb.c > @@ -16,7 +16,6 @@ > #include <media/videobuf-dma-contig.h> > #include <media/v4l2-device.h> > > -#include <linux/omap-dma.h> > #include <video/omapvrfb.h> > > #include "omap_voutdef.h" > @@ -63,7 +62,7 @@ static int omap_vout_allocate_vrfb_buffers(struct omap_vout_device *vout, > /* > * Wakes up the application once the DMA transfer to VRFB space is completed. > */ > -static void omap_vout_vrfb_dma_tx_callback(int lch, u16 ch_status, void *data) > +static void omap_vout_vrfb_dma_tx_callback(void *data) > { > struct vid_vrfb_dma *t = (struct vid_vrfb_dma *) data; > > @@ -94,6 +93,7 @@ int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num, > int ret = 0, i, j; > struct omap_vout_device *vout; > struct video_device *vfd; > + dma_cap_mask_t mask; > int image_width, image_height; > int vrfb_num_bufs = VRFB_NUM_BUFS; > struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev); > @@ -131,17 +131,26 @@ int omap_vout_setup_vrfb_bufs(struct platform_device *pdev, int vid_num, > /* > * Request and Initialize DMA, for DMA based VRFB transfer > */ > - vout->vrfb_dma_tx.dev_id = OMAP_DMA_NO_DEVICE; > - vout->vrfb_dma_tx.dma_ch = -1; > - vout->vrfb_dma_tx.req_status = DMA_CHAN_ALLOTED; > - ret = omap_request_dma(vout->vrfb_dma_tx.dev_id, "VRFB DMA TX", > - omap_vout_vrfb_dma_tx_callback, > - (void *) &vout->vrfb_dma_tx, &vout->vrfb_dma_tx.dma_ch); > - if (ret < 0) { > + dma_cap_zero(mask); > + dma_cap_set(DMA_INTERLEAVE, mask); > + vout->vrfb_dma_tx.chan = dma_request_chan_by_mask(&mask); > + if (IS_ERR(vout->vrfb_dma_tx.chan)) { > vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED; > + } else { > + size_t xt_size = sizeof(struct dma_interleaved_template) + > + sizeof(struct data_chunk); > + > + vout->vrfb_dma_tx.xt = kzalloc(xt_size, GFP_KERNEL); > + if (!vout->vrfb_dma_tx.xt) { > + dma_release_channel(vout->vrfb_dma_tx.chan); > + vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED; > + } > + } > + > + if (vout->vrfb_dma_tx.req_status == DMA_CHAN_NOT_ALLOTED) > dev_info(&pdev->dev, ": failed to allocate DMA Channel for" > " video%d\n", vfd->minor); > - } > + > init_waitqueue_head(&vout->vrfb_dma_tx.wait); > > /* statically allocated the VRFB buffer is done through > @@ -176,7 +185,9 @@ void omap_vout_release_vrfb(struct omap_vout_device *vout) > > if (vout->vrfb_dma_tx.req_status == DMA_CHAN_ALLOTED) { > vout->vrfb_dma_tx.req_status = DMA_CHAN_NOT_ALLOTED; > - omap_free_dma(vout->vrfb_dma_tx.dma_ch); > + kfree(vout->vrfb_dma_tx.xt); > + dmaengine_terminate_sync(vout->vrfb_dma_tx.chan); > + dma_release_channel(vout->vrfb_dma_tx.chan); > } > } > > @@ -218,70 +229,84 @@ int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout, > } > > int omap_vout_prepare_vrfb(struct omap_vout_device *vout, > - struct videobuf_buffer *vb) > + struct videobuf_buffer *vb) > { > - dma_addr_t dmabuf; > - struct vid_vrfb_dma *tx; > + struct dma_async_tx_descriptor *tx; > + enum dma_ctrl_flags flags; > + struct dma_chan *chan = vout->vrfb_dma_tx.chan; > + struct dma_device *dmadev = chan->device; > + struct dma_interleaved_template *xt = vout->vrfb_dma_tx.xt; > + dma_cookie_t cookie; > + enum dma_status status; > enum dss_rotation rotation; > - u32 dest_frame_index = 0, src_element_index = 0; > - u32 dest_element_index = 0, src_frame_index = 0; > - u32 elem_count = 0, frame_count = 0, pixsize = 2; > + size_t dst_icg; > + u32 pixsize; > > if (!is_rotation_enabled(vout)) > return 0; > > - dmabuf = vout->buf_phy_addr[vb->i]; > /* If rotation is enabled, copy input buffer into VRFB > * memory space using DMA. We are copying input buffer > * into VRFB memory space of desired angle and DSS will > * read image VRFB memory for 0 degree angle > */ > + > pixsize = vout->bpp * vout->vrfb_bpp; > - /* > - * DMA transfer in double index mode > - */ > + dst_icg = ((MAX_PIXELS_PER_LINE * pixsize) - > + (vout->pix.width * vout->bpp)) + 1; > + > + xt->src_start = vout->buf_phy_addr[vb->i]; > + xt->dst_start = vout->vrfb_context[vb->i].paddr[0]; > + > + xt->numf = vout->pix.height; > + xt->frame_size = 1; > + xt->sgl[0].size = vout->pix.width * vout->bpp; > + xt->sgl[0].icg = dst_icg; > + > + xt->dir = DMA_MEM_TO_MEM; > + xt->src_sgl = false; > + xt->src_inc = true; > + xt->dst_sgl = true; > + xt->dst_inc = true; > + > + tx = dmadev->device_prep_interleaved_dma(chan, xt, flags); > + if (tx == NULL) { > + pr_err("%s: DMA interleaved prep error\n", __func__); > + return -EINVAL; > + } > > - /* Frame index */ > - dest_frame_index = ((MAX_PIXELS_PER_LINE * pixsize) - > - (vout->pix.width * vout->bpp)) + 1; > - > - /* Source and destination parameters */ > - src_element_index = 0; > - src_frame_index = 0; > - dest_element_index = 1; > - /* Number of elements per frame */ > - elem_count = vout->pix.width * vout->bpp; > - frame_count = vout->pix.height; > - tx = &vout->vrfb_dma_tx; > - tx->tx_status = 0; > - omap_set_dma_transfer_params(tx->dma_ch, OMAP_DMA_DATA_TYPE_S32, > - (elem_count / 4), frame_count, OMAP_DMA_SYNC_ELEMENT, > - tx->dev_id, 0x0); > - /* src_port required only for OMAP1 */ > - omap_set_dma_src_params(tx->dma_ch, 0, OMAP_DMA_AMODE_POST_INC, > - dmabuf, src_element_index, src_frame_index); > - /*set dma source burst mode for VRFB */ > - omap_set_dma_src_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16); > - rotation = calc_rotation(vout); > + tx->callback = omap_vout_vrfb_dma_tx_callback; > + tx->callback_param = &vout->vrfb_dma_tx; > + > + cookie = dmaengine_submit(tx); > + if (dma_submit_error(cookie)) { > + pr_err("%s: dmaengine_submit failed (%d)\n", __func__, cookie); > + return -EINVAL; > + } > > - /* dest_port required only for OMAP1 */ > - omap_set_dma_dest_params(tx->dma_ch, 0, OMAP_DMA_AMODE_DOUBLE_IDX, > - vout->vrfb_context[vb->i].paddr[0], dest_element_index, > - dest_frame_index); > - /*set dma dest burst mode for VRFB */ > - omap_set_dma_dest_burst_mode(tx->dma_ch, OMAP_DMA_DATA_BURST_16); > - omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, 0x20, 0); > + vout->vrfb_dma_tx.tx_status = 0; > + dma_async_issue_pending(chan); > > - omap_start_dma(tx->dma_ch); > - wait_event_interruptible_timeout(tx->wait, tx->tx_status == 1, > + wait_event_interruptible_timeout(vout->vrfb_dma_tx.wait, > + vout->vrfb_dma_tx.tx_status == 1, > VRFB_TX_TIMEOUT); > > - if (tx->tx_status == 0) { > - omap_stop_dma(tx->dma_ch); > + status = dma_async_is_tx_complete(chan, cookie, NULL, NULL); > + > + if (vout->vrfb_dma_tx.tx_status == 0) { > + pr_err("%s: Timeout while waiting for DMA\n", __func__); > + dmaengine_terminate_sync(chan); > + return -EINVAL; > + } else if (status != DMA_COMPLETE) { > + pr_err("%s: DMA completion %s status\n", __func__, > + status == DMA_ERROR ? "error" : "busy"); > + dmaengine_terminate_sync(chan); > return -EINVAL; > } > + > /* Store buffers physical address into an array. Addresses > * from this array will be used to configure DSS */ > + rotation = calc_rotation(vout); > vout->queued_buf_addr[vb->i] = (u8 *) > vout->vrfb_context[vb->i].paddr[rotation]; > return 0; > diff --git a/drivers/media/platform/omap/omap_voutdef.h b/drivers/media/platform/omap/omap_voutdef.h > index 80c79fabdf95..56b630b1c8b4 100644 > --- a/drivers/media/platform/omap/omap_voutdef.h > +++ b/drivers/media/platform/omap/omap_voutdef.h > @@ -14,6 +14,7 @@ > #include <media/v4l2-ctrls.h> > #include <video/omapfb_dss.h> > #include <video/omapvrfb.h> > +#include <linux/dmaengine.h> > > #define YUYV_BPP 2 > #define RGB565_BPP 2 > @@ -81,8 +82,9 @@ enum vout_rotaion_type { > * for VRFB hidden buffer > */ > struct vid_vrfb_dma { > - int dev_id; > - int dma_ch; > + struct dma_chan *chan; > + struct dma_interleaved_template *xt; > + > int req_status; > int tx_status; > wait_queue_head_t wait; > -- > 2.9.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
