In short:
Is it normal that I can use the v4l2-ctl command to adjust brightness, saturation, hue, etc but not to adjust more interesting parameters like bitrate, aspect ration, etc?
Working:
pi@raspberrypi:~ $ cat /sys/class/pvrusb2/sn-4034395926/ctl_hue/cur_val
0
pi@raspberrypi:~ $ v4l2-ctl -c hue=1
pi@raspberrypi:~ $ cat /sys/class/pvrusb2/sn-4034395926/ctl_hue/cur_val
1
Not working:
pi@raspberrypi:~ $ cat /sys/class/pvrusb2/sn-4034395926/ctl_video_bitrate/cur_val
6000000
pi@raspberrypi:~ $ v4l2-ctl -c bitrate=6000000
unknown control 'bitrate'
pi@raspberrypi:~ $ v4l2-ctl -c video_bitrate=6000000
unknown control 'video_bitrate'
pi@raspberrypi:~ $ v4l2-ctl -c ctl_video_bitrate=6000000
unknown control 'ctl_video_bitrate'
the pvrusb2 driver has created all sysfs parameters and they work using the "echo" method but I thought this was also the purpose of the v4l2-ctl command, correct?
Some details, let me know if you need more.
Regards,
Koen
pi@raspberrypi:~ $ uname -a
Linux raspberrypi 4.4.13+ #894 Mon Jun 13 12:43:26 BST 2016 armv6l GNU/Linux
pi@raspberrypi:~ $
pi@raspberrypi:~ $ v4l2-ctl --all
Driver Info (not using libv4l2):
Driver name : pvrusb2
Card type : WinTV HVR-1900 Model 73xxx
Bus info : usb-20980000.usb-1.3
Driver version: 4.4.13
Capabilities : 0x81270001
Video Capture
Tuner
Audio
Radio
Read/Write
Extended Pix Format
Device Capabilities
Device Caps : 0x01230001
Video Capture
Tuner
Audio
Read/Write
Extended Pix Format
Priority: 2
Frequency for tuner 0: 980 (61.250000 MHz)
Tuner 0:
Name :
Capabilities : 62.5 kHz multi-standard stereo lang1 lang2 freq-bands
Frequency range : 44.000 MHz - 958.000 MHz
Signal strength/AFC : 0%/0
Current audio mode : stereo
Available subchannels: mono lang2
Video input : 0 (television: ok)
Audio input : 0 (PVRUSB2 Audio)
Video Standard = 0x00000000
Format Video Capture:
Width/Height : 720/480
Pixel Format : ''
Field : Interlaced
Bytes per Line: 0
Size Image : 32768
Colorspace : Unknown (00000000)
Flags :
Crop Capability Video Capture:
Bounds : Left 0, Top 0, Width 0, Height 0
Default : Left 0, Top 0, Width 0, Height 0
Pixel Aspect: 0/0
Crop: Left 0, Top 0, Width 720, Height 480
Streaming Parameters Video Capture:
Frames per second: 25.000 (25/1)
Read buffers : 2
brightness (int) : min=0 max=255 step=1 default=128 value=128
contrast (int) : min=0 max=127 step=1 default=68 value=68
saturation (int) : min=0 max=127 step=1 default=64 value=64
hue (int) : min=-128 max=127 step=1 default=0 value=0
volume (int) : min=0 max=65535 step=1 default=62000 value=62000
balance (int) : min=-32768 max=32767 step=1 default=0 value=0
bass (int) : min=-32768 max=32767 step=1 default=0 value=0
treble (int) : min=-32768 max=32767 step=1 default=0 value=0
mute (bool) : default=0 value=0
dmesg output:
[ 4.162258] scsi host0: usb-storage 1-1.2:1.0
[ 4.258220] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[ 4.382814] usb 1-1.3: New USB device found, idVendor=2040, idProduct=7300
[ 4.391713] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.400866] usb 1-1.3: Product: WinTV
[ 4.406259] usb 1-1.3: Manufacturer: Hauppauge
[ 4.412471] usb 1-1.3: SerialNumber: 7300-00-F077FF16
...
[ 10.463517] media: Linux media interface: v0.10
[ 10.547654] Linux video capture interface: v2.00
[ 10.660771] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.781359] pvrusb2: Hardware description: WinTV HVR-1900 Model 73xxx
[ 10.798664] usbcore: registered new interface driver pvrusb2
[ 10.798702] pvrusb2: V4L in-tree version:Hauppauge WinTV-PVR-USB2 MPEG2 Encoder/Tuner
[ 10.798721] pvrusb2: Debug mask is 1 (0x1)
[ 11.484744] systemd-journald[117]: Received request to flush runtime journal from PID 1
[ 11.782401] pvrusb2: Device microcontroller firmware (re)loaded; it should now reset and reconnect.
[ 11.974683] usb 1-1.3: USB disconnect, device number 5
[ 13.748236] usb 1-1.3: new high-speed USB device number 6 using dwc_otg
[ 13.858748] usb 1-1.3: New USB device found, idVendor=2040, idProduct=7300
[ 13.858790] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 13.858810] usb 1-1.3: Product: WinTV
[ 13.858827] usb 1-1.3: Manufacturer: Hauppauge
[ 13.858844] usb 1-1.3: SerialNumber: 7300-00-F077FF16
[ 13.868612] pvrusb2: Hardware description: WinTV HVR-1900 Model 73xxx
[ 13.921561] pvrusb2: Binding ir_rx_z8f0811_haup to i2c address 0x71.
[ 13.921787] pvrusb2: Binding ir_tx_z8f0811_haup to i2c address 0x70.
[ 14.099430] cx25840 3-0044: cx25843-24 found @ 0x88 (pvrusb2_a)
[ 14.118546] pvrusb2: Attached sub-driver cx25840
[ 14.415416] tuner 3-0042: Tuner -1 found with type(s) Radio TV.
[ 14.415503] pvrusb2: Attached sub-driver tuner
...
[ 16.664488] cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[ 16.786299] tveeprom 3-00a2: Hauppauge model 73219, rev D2F5, serial# 4034395926
[ 16.786337] tveeprom 3-00a2: MAC address is 00:0d:fe:77:ff:16
[ 16.786356] tveeprom 3-00a2: tuner model is NXP 18271C2 (idx 155, type 54)
[ 16.786377] tveeprom 3-00a2: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 16.786393] tveeprom 3-00a2: audio processor is CX25843 (idx 37)
[ 16.786410] tveeprom 3-00a2: decoder processor is CX25843 (idx 30)
[ 16.786426] tveeprom 3-00a2: has radio, has IR receiver, has IR transmitter
[ 16.786522] pvrusb2: Device initialization completed successfully.
[ 16.833872] pvrusb2: registered device video0 [mpeg]
[ 16.833917] DVB: registering new adapter (pvrusb2-dvb)
[ 17.724319] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 17.725055] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.185810] cx25840 3-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[ 19.318894] tda829x 3-0042: setting tuner address to 60
[ 19.336993] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 19.348636] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.408700] tda18271 3-0060: creating new instance
[ 19.458819] TDA18271HD/C2 detected @ 3-0060
[ 20.358789] tda18271: performing RF tracking filter calibration
[ 39.498969] tda18271: RF tracking filter calibration complete
[ 39.568994] tda829x 3-0042: type set to tda8295+18271
[ 46.439239] cx25840 3-0044: 0x0000 is not a valid video input!
[ 46.498783] usb 1-1.3: DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
[ 46.507172] tda829x 3-0042: type set to tda8295
[ 46.547113] tda18271 3-0060: attaching existing instance
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
