[PATCH v2 02/12] [media] cx231xx: fix GPIOs for Pixelview SBTVD hybrid

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>

This device uses GPIOs: 28 to switch between analog and
digital modes: on digital mode, it should be set to 1.

The code that sets it on analog mode is OK, but it misses
the logic that sets it on digital mode.

Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
 drivers/media/usb/cx231xx/cx231xx-core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c
index 630f4fc5155f..6c8f825452dd 100644
--- a/drivers/media/usb/cx231xx/cx231xx-core.c
+++ b/drivers/media/usb/cx231xx/cx231xx-core.c
@@ -712,6 +712,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
 			break;
 		case CX231XX_BOARD_CNXT_RDE_253S:
 		case CX231XX_BOARD_CNXT_RDU_253S:
+		case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 			errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1);
 			break;
 		case CX231XX_BOARD_HAUPPAUGE_EXETER:
@@ -738,7 +739,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
 		case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 		case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL:
 		case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC:
-		errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
+			errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
 			break;
 		default:
 			break;
-- 
2.7.4


--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux