Hi Geert,
On Tuesday 23 Aug 2016 15:11:59 Geert Uytterhoeven wrote:
> On Wed, Aug 17, 2016 at 2:55 PM, Laurent Pinchart wrote:
> > On Tuesday 09 Aug 2016 17:36:41 Geert Uytterhoeven wrote:
> >> When resuming from suspend-to-RAM on r8a7795/salvator-x:
> >> dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1
> >> PM: Device fe940000.fdp1 failed to resume noirq: error 1
> >> dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1
> >> PM: Device fe944000.fdp1 failed to resume noirq: error 1
> >> dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1
> >> PM: Device fe948000.fdp1 failed to resume noirq: error 1
> >>
> >> According to its documentation, rcar_fcp_enable() returns 0 on success
> >> or a negative error code if an error occurs. Hence
> >> fdp1_pm_runtime_resume() and vsp1_pm_runtime_resume() forward its return
> >> value to their callers.
> >>
> >> However, rcar_fcp_enable() forwards the return value of
> >> pm_runtime_get_sync(), which can actually be 1 on success, leading to
> >> the resume failure above.
> >>
> >> To fix this, consider only negative values returned by
> >> pm_runtime_get_sync() to be failures.
> >>
> >> Fixes: 7b49235e83b2347c ("[media] v4l: Add Renesas R-Car FCP driver")
> >> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> >> ---
> >>
> >> drivers/media/platform/rcar-fcp.c | 8 +++++++-
> >> 1 file changed, 7 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/media/platform/rcar-fcp.c
> >> b/drivers/media/platform/rcar-fcp.c index
> >> 0ff6b1edf1dbf677..7e944479205d4059 100644
> >> --- a/drivers/media/platform/rcar-fcp.c
> >> +++ b/drivers/media/platform/rcar-fcp.c
> >> @@ -99,10 +99,16 @@ EXPORT_SYMBOL_GPL(rcar_fcp_put);
> >>
> >> */
> >>
> >> int rcar_fcp_enable(struct rcar_fcp_device *fcp)
> >> {
> >>
> >> + int error;
> >
> > I was going to write that the driver uses "ret" instead of "error" for
> > integer status return values, but it doesn't as there no such value
> > stored in a variable at all. I will thus argue that it will use that
> > style later, so let's keep the style consistent with the to-be-written
> > code if you don't mind :-)
> >
> > Apart from that,
> >
> > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> >
> > and applied to my tree.
>
> Thanks!
>
> Where exactly has this been applied?
git://linuxtv.org/pinchartl/media.git vsp1/next
I see now that Mauro has applied it already. Mauro, could you please avoid
merging patches that I take through my tree, especially when I request changes
?
> >> if (!fcp)
> >>
> >> return 0;
> >>
> >> - return pm_runtime_get_sync(fcp->dev);
> >> + error = pm_runtime_get_sync(fcp->dev);
> >> + if (error < 0)
> >> + return error;
> >> +
> >> + return 0;
> >>
> >> }
> >> EXPORT_SYMBOL_GPL(rcar_fcp_enable);
>
> BTW, it seems I missed a few more s2ram resume errors:
>
> dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns -13
> PM: Device fe920000.vsp failed to resume noirq: error -13
> dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns -13
> PM: Device fe960000.vsp failed to resume noirq: error -13
> dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns -13
> PM: Device fe9a0000.vsp failed to resume noirq: error -13
> dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns -13
> PM: Device fe9b0000.vsp failed to resume noirq: error -13
> dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns -13
> PM: Device fe9c0000.vsp failed to resume noirq: error -13
> dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns -13
> PM: Device fea20000.vsp failed to resume noirq: error -13
> dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns -13
> PM: Device fea28000.vsp failed to resume noirq: error -13
> dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns -13
> PM: Device fea30000.vsp failed to resume noirq: error -13
> vsp1 fea38000.vsp: failed to reset wpf.0
> dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns -110
> PM: Device fea38000.vsp failed to resume noirq: error -110
>
> -13 == -EACCES, returned by rcar_fcp_enable() as pm_runtime_get_sync()
> is called too early during system resume,
Do you have a fix for this ? :-)
> -110 = ETIMEDOUT, returned by vsp1_device_init() due to the failure
> to reset wpf.0.
This one needs to be investigated.
--
Regards,
Laurent Pinchart
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
