Add a new style driver for the clock control unit in Allwinner A13.
Only AVS and VE are supported since they weren't provided until now and are
needed for "sunxi-cedrus".
Signed-off-by: Florent Revest <florent.revest@xxxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/clock/sunxi-ccu.txt | 1 +
arch/arm/boot/dts/sun5i-a13.dtsi | 11 +++
drivers/clk/sunxi-ng/Kconfig | 11 +++
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun5i-a13.c | 80 ++++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun5i-a13.h | 25 +++++++
include/dt-bindings/clock/sun5i-a13-ccu.h | 49 +++++++++++++
include/dt-bindings/reset/sun5i-a13-ccu.h | 48 +++++++++++++
8 files changed, 226 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun5i-a13.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun5i-a13.h
create mode 100644 include/dt-bindings/clock/sun5i-a13-ccu.h
create mode 100644 include/dt-bindings/reset/sun5i-a13-ccu.h
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index cb91507..7bb7a6a 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -4,6 +4,7 @@ Allwinner Clock Control Unit Binding
Required properties :
- compatible: must contain one of the following compatible:
- "allwinner,sun8i-h3-ccu"
+ - "allwinner,sun5i-a13-ccu"
- reg: Must contain the registers base address and length
- clocks: phandle to the oscillators feeding the CCU. Two are needed:
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index e012890..2afe05fb 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -46,8 +46,10 @@
#include "sun5i.dtsi"
+#include <dt-bindings/clock/sun5i-a13-ccu.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/reset/sun5i-a13-ccu.h>
/ {
interrupt-parent = <&intc>;
@@ -327,6 +329,15 @@
};
};
};
+
+ ccu: clock@01c20000 {
+ compatible = "allwinner,sun5i-a13-ccu";
+ reg = <0x01c20000 0x400>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
};
};
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 2afcbd3..8faba4e 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -51,6 +51,17 @@ config SUNXI_CCU_MP
# SoC Drivers
+config SUN5I_A13_CCU
+ bool "Support for the Allwinner A13 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_NK
+ select SUNXI_CCU_NKM
+ select SUNXI_CCU_NKMP
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ select SUNXI_CCU_PHASE
+ default ARCH_SUN5I
+
config SUN8I_H3_CCU
bool "Support for the Allwinner H3 CCU"
select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 633ce64..1710745 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -17,4 +17,5 @@ obj-$(CONFIG_SUNXI_CCU_NM) += ccu_nm.o
obj-$(CONFIG_SUNXI_CCU_MP) += ccu_mp.o
# SoC support
+obj-$(CONFIG_SUN5I_A13_CCU) += ccu-sun5i-a13.o
obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun5i-a13.c b/drivers/clk/sunxi-ng/ccu-sun5i-a13.c
new file mode 100644
index 0000000..7f1da20
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun5i-a13.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun5i-a13.h"
+
+static SUNXI_CCU_GATE(ve_clk, "ve", "pll4",
+ 0x13c, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M",
+ 0x144, BIT(31), 0);
+
+static struct ccu_common *sun5i_a13_ccu_clks[] = {
+ &ve_clk.common,
+ &avs_clk.common,
+};
+
+static struct clk_hw_onecell_data sun5i_a13_hw_clks = {
+ .hws = {
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun5i_a13_ccu_resets[] = {
+ [RST_VE] = { 0x13c, BIT(0) },
+};
+
+static const struct sunxi_ccu_desc sun5i_a13_ccu_desc = {
+ .ccu_clks = sun5i_a13_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun5i_a13_ccu_clks),
+
+ .hw_clks = &sun5i_a13_hw_clks,
+
+ .resets = sun5i_a13_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun5i_a13_ccu_resets),
+};
+
+static void __init sun5i_a13_ccu_setup(struct device_node *node)
+{
+ void __iomem *reg;
+
+ reg = of_iomap(node, 0);
+ if (IS_ERR(reg)) {
+ pr_err("%s: Could not map the clock registers\n",
+ of_node_full_name(node));
+ return;
+ }
+
+ sunxi_ccu_probe(node, reg, &sun5i_a13_ccu_desc);
+}
+
+CLK_OF_DECLARE(sun5i_A13_ccu, "allwinner,sun5i-a13-ccu",
+ sun5i_a13_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun5i-a13.h b/drivers/clk/sunxi-ng/ccu-sun5i-a13.h
new file mode 100644
index 0000000..a52af0b
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun5i-a13.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2016 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN5I_A13_H_
+#define _CCU_SUN5I_A13_H_
+
+#include <dt-bindings/clock/sun5i-a13-ccu.h>
+#include <dt-bindings/reset/sun5i-a13-ccu.h>
+
+#define CLK_NUMBER 2
+
+#endif /* _CCU_SUN5I_A13_H_ */
diff --git a/include/dt-bindings/clock/sun5i-a13-ccu.h b/include/dt-bindings/clock/sun5i-a13-ccu.h
new file mode 100644
index 0000000..1218338
--- /dev/null
+++ b/include/dt-bindings/clock/sun5i-a13-ccu.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_a13_H_
+#define _DT_BINDINGS_CLK_SUN8I_a13_H_
+
+#define CLK_VE 0
+#define CLK_AVS 1
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_A13_H_ */
diff --git a/include/dt-bindings/reset/sun5i-a13-ccu.h b/include/dt-bindings/reset/sun5i-a13-ccu.h
new file mode 100644
index 0000000..f20b4f6
--- /dev/null
+++ b/include/dt-bindings/reset/sun5i-a13-ccu.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN5I_A13_H_
+#define _DT_BINDINGS_RST_SUN5I_A13_H_
+
+#define RST_VE 0
+
+#endif /* _DT_BINDINGS_RST_SUN5I_A13_H_ */
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
