On Mon 22 Aug 06:13 PDT 2016, Stanimir Varbanov wrote:
Hi Stan,
> This adds core part of the vidc driver common helper functions
> used by encoder and decoder specific files.
I believe "vidc" is short for "video core" and this is not the only
"video core" from Qualcomm. This driver is the v4l2 <-> hfi interface and
uses either two ram based fifos _or_ apr tal for communication with the
implementation.
In the case of apr, the other side is not the venus core but rather the
"VIDC" apr service on the Hexagon DSP. In this case the hfi packets are
encapsulated in apr packets. Although this is not used in 8916 it would
be nice to be able to add this later...
But I think we should call this driver "hfi" - or at least venus, as
it's not compatible with e.g the "blackbird" found in 8064, which is
also called "vidc".
>
> - core.c has implemented the platform dirver methods, file
> operations and v4l2 registration.
>
> - helpers.c has implemented common helper functions for
> buffer management, vb2_ops and functions for format propagation.
>
> - int_bufs.c implements functions for allocating and freeing
> buffers for internal usage. The buffer parameters describing
> internal buffers depends on current format, resolution and
> codec.
>
> - load.c consists functions for calculation of current load
> of the hardware. Depending on the count of instances and
> resolutions it selects the best clock rate for the video
> core.
>
> - mem.c has two functions for memory allocation, currently
> those functions are used for internal buffers and to allocate
> the shared memory for communication with firmware via HFI
> (Host Firmware Interface) interface commands.
Please drop this; see comments on mem_alloc()
>
> - resources.c exports a structure describing the details
> specific to platform and SoC.
>
> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
> ---
This doesn't compile, as it depends on later patches. Also there are
plenty of functions that are related to later patches and would with be
better to include there, to keep the size of this patch down.
> drivers/media/platform/qcom/vidc/core.c | 548 +++++++++++++++++++++++++++
> drivers/media/platform/qcom/vidc/core.h | 196 ++++++++++
> drivers/media/platform/qcom/vidc/helpers.c | 394 +++++++++++++++++++
> drivers/media/platform/qcom/vidc/helpers.h | 43 +++
> drivers/media/platform/qcom/vidc/int_bufs.c | 325 ++++++++++++++++
> drivers/media/platform/qcom/vidc/int_bufs.h | 23 ++
> drivers/media/platform/qcom/vidc/load.c | 104 +++++
> drivers/media/platform/qcom/vidc/load.h | 22 ++
> drivers/media/platform/qcom/vidc/mem.c | 64 ++++
> drivers/media/platform/qcom/vidc/mem.h | 32 ++
> drivers/media/platform/qcom/vidc/resources.c | 46 +++
> drivers/media/platform/qcom/vidc/resources.h | 46 +++
> 12 files changed, 1843 insertions(+)
> create mode 100644 drivers/media/platform/qcom/vidc/core.c
> create mode 100644 drivers/media/platform/qcom/vidc/core.h
> create mode 100644 drivers/media/platform/qcom/vidc/helpers.c
> create mode 100644 drivers/media/platform/qcom/vidc/helpers.h
> create mode 100644 drivers/media/platform/qcom/vidc/int_bufs.c
> create mode 100644 drivers/media/platform/qcom/vidc/int_bufs.h
> create mode 100644 drivers/media/platform/qcom/vidc/load.c
> create mode 100644 drivers/media/platform/qcom/vidc/load.h
> create mode 100644 drivers/media/platform/qcom/vidc/mem.c
> create mode 100644 drivers/media/platform/qcom/vidc/mem.h
> create mode 100644 drivers/media/platform/qcom/vidc/resources.c
> create mode 100644 drivers/media/platform/qcom/vidc/resources.h
>
> diff --git a/drivers/media/platform/qcom/vidc/core.c b/drivers/media/platform/qcom/vidc/core.c
> new file mode 100644
> index 000000000000..e005be178fc0
> --- /dev/null
> +++ b/drivers/media/platform/qcom/vidc/core.c
> @@ -0,0 +1,548 @@
> +/*
> + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
> + * Copyright (C) 2016 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +#include <linux/clk.h>
> +#include <linux/init.h>
> +#include <linux/ioctl.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +#include <linux/remoteproc.h>
> +#include <linux/pm_runtime.h>
> +#include <media/videobuf2-v4l2.h>
> +#include <media/v4l2-ioctl.h>
> +
> +#include "core.h"
> +#include "resources.h"
> +#include "vdec.h"
> +#include "venc.h"
> +
> +static void vidc_add_inst(struct vidc_core *core, struct vidc_inst *inst)
> +{
> + mutex_lock(&core->lock);
> + list_add_tail(&inst->list, &core->instances);
There are two different "instances" lists in this implementation, one
keeping track of vidc instances and one keeping track of hfi instances,
at the same time the vidc instances has a reference to its associated
hfi instance.
It should be possible to drop one of those lists.
> + mutex_unlock(&core->lock);
> +}
> +
> +static void vidc_del_inst(struct vidc_core *core, struct vidc_inst *inst)
> +{
> + struct vidc_inst *pos, *n;
> +
> + mutex_lock(&core->lock);
> + list_for_each_entry_safe(pos, n, &core->instances, list) {
> + if (pos == inst)
> + list_del(&inst->list);
> + }
> + mutex_unlock(&core->lock);
> +}
> +
> +static int vidc_rproc_boot(struct vidc_core *core)
> +{
> + int ret;
> +
> + if (core->rproc_booted)
> + return 0;
rproc_boot()/rproc_shutdown() is reference counted, so there is no
reason (other than this driver being buggy) to keep track of
"rproc_boot". As such, you can drop vidc_rproc_boot() and
vidc_rproc_shutdown() and just call the rproc functions directly.
> +
> + ret = rproc_boot(core->rproc);
> + if (ret)
> + return ret;
> +
> + core->rproc_booted = true;
> +
> + return 0;
> +}
> +
> +static void vidc_rproc_shutdown(struct vidc_core *core)
> +{
> + if (!core->rproc_booted)
> + return;
> +
> + rproc_shutdown(core->rproc);
> + core->rproc_booted = false;
> +}
> +
> +struct vidc_sys_error {
> + struct vidc_core *core;
> + struct delayed_work work;
> +};
This is cool, but during the 5 second delay we should be able to call
remove on the driver and this will dereference a freed hfi instance.
Move the worker to hfi_core and you can cancel it on remove.
> +
> +static void vidc_sys_error_handler(struct work_struct *work)
> +{
> + struct vidc_sys_error *handler =
> + container_of(work, struct vidc_sys_error, work.work);
> + struct vidc_core *core = handler->core;
> + struct hfi_core *hfi = &core->hfi;
> + struct device *dev = core->dev;
> + int ret;
> +
> + mutex_lock(&hfi->lock);
> + if (hfi->state != CORE_INVALID)
> + goto exit;
> +
> + mutex_unlock(&hfi->lock);
> +
> + ret = vidc_hfi_core_deinit(hfi);
> + if (ret)
> + dev_err(dev, "core: deinit failed (%d)\n", ret);
> +
> + mutex_lock(&hfi->lock);
> +
> + rproc_report_crash(core->rproc, RPROC_FATAL_ERROR);
This operation is async, as such I believe this to be fragile. To get
the expected result you should be able to simply call
rproc_shutdown()/rproc_boot() to restart the core...
However, if we at any point would like to be able to get memory dumps
from this core (likely a requirement on the Qualcomm side) we need to
call rproc_report_crash() and let it collect the resources and then
power cycle the core.
As the life cycle of the venus driver goes 1:1 with the rproc driver I
think it would be more suitable to make the v4l driver a child of the
rproc driver and have it probe/remove this driver as the rproc comes and
goes. This would allow us to call rproc_report_crash() here, we will be
removed and when the crash is handled (sometime in the future) we will
be probed again.
> +
> + vidc_rproc_shutdown(core);
> +
> + ret = vidc_rproc_boot(core);
> + if (ret)
> + goto exit;
> +
> + hfi->state = CORE_INIT;
> +
> +exit:
> + mutex_unlock(&hfi->lock);
> + kfree(handler);
> +}
> +
> +static int vidc_event_notify(struct hfi_core *hfi, u32 event)
> +{
> + struct vidc_sys_error *handler;
> + struct hfi_inst *inst;
> +
> + switch (event) {
> + case EVT_SYS_WATCHDOG_TIMEOUT:
> + case EVT_SYS_ERROR:
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + mutex_lock(&hfi->lock);
> +
> + hfi->state = CORE_INVALID;
> +
> + list_for_each_entry(inst, &hfi->instances, list) {
> + mutex_lock(&inst->lock);
> + inst->state = INST_INVALID;
> + mutex_unlock(&inst->lock);
> + }
> +
> + mutex_unlock(&hfi->lock);
> +
> + handler = kzalloc(sizeof(*handler), GFP_KERNEL);
> + if (!handler)
> + return -ENOMEM;
> +
> + handler->core = container_of(hfi, struct vidc_core, hfi);
> + INIT_DELAYED_WORK(&handler->work, vidc_sys_error_handler);
> +
> + /*
> + * Sleep for 5 sec to ensure venus has completed any
> + * pending cache operations. Without this sleep, we see
> + * device reset when firmware is unloaded after a sys
> + * error.
> + */
> + schedule_delayed_work(&handler->work, msecs_to_jiffies(5000));
> +
> + return 0;
> +}
> +
> +static const struct hfi_core_ops vidc_core_ops = {
> + .event_notify = vidc_event_notify,
> +};
This is an overly generic way of calling vidc_sys_error_handler().
There is no need for having the hfi_core_ops indirections for a single
op that will only exist in 1 and only 1 variant.
Just replace the two affected event_notify() calls with a direct call to
this function (and clean it up a bit).
> +
> +static int vidc_open(struct file *file)
> +{
> + struct video_device *vdev = video_devdata(file);
> + struct vidc_core *core = video_drvdata(file);
> + struct vidc_inst *inst;
> + int ret = 0;
> +
> + inst = kzalloc(sizeof(*inst), GFP_KERNEL);
> + if (!inst)
> + return -ENOMEM;
> +
> + mutex_init(&inst->lock);
> +
> + INIT_VIDC_LIST(&inst->scratchbufs);
Please inline the mutex_init() and INIT_LIST_HEAD() here and drop the
custom INIT_VIDC_LIST() wrapper macro.
> + INIT_VIDC_LIST(&inst->persistbufs);
> + INIT_VIDC_LIST(&inst->registeredbufs);
> +
> + INIT_LIST_HEAD(&inst->bufqueue);
> + mutex_init(&inst->bufqueue_lock);
> +
> + if (vdev == &core->vdev_dec)
> + inst->session_type = VIDC_SESSION_TYPE_DEC;
> + else
> + inst->session_type = VIDC_SESSION_TYPE_ENC;
> +
> + inst->core = core;
> +
> + if (inst->session_type == VIDC_SESSION_TYPE_DEC)
> + ret = vdec_open(inst);
> + else
> + ret = venc_open(inst);
> +
> + if (ret)
> + goto err_free_inst;
> +
> + if (inst->session_type == VIDC_SESSION_TYPE_DEC)
> + v4l2_fh_init(&inst->fh, &core->vdev_dec);
> + else
> + v4l2_fh_init(&inst->fh, &core->vdev_enc);
Here we have three sequential conditionals testing for the same thing,
please join them into one.
> +
> + inst->fh.ctrl_handler = &inst->ctrl_handler;
> +
> + v4l2_fh_add(&inst->fh);
> +
> + file->private_data = &inst->fh;
> +
> + vidc_add_inst(core, inst);
> +
> + return 0;
> +
> +err_free_inst:
> + kfree(inst);
> + return ret;
> +}
> +
> +static int vidc_close(struct file *file)
> +{
> + struct vidc_inst *inst = to_inst(file);
> + struct vidc_core *core = inst->core;
> +
> + if (inst->session_type == VIDC_SESSION_TYPE_DEC)
> + vdec_close(inst);
> + else
> + venc_close(inst);
> +
> + vidc_del_inst(core, inst);
> +
> + mutex_destroy(&inst->bufqueue_lock);
> + mutex_destroy(&inst->scratchbufs.lock);
> + mutex_destroy(&inst->persistbufs.lock);
> + mutex_destroy(&inst->registeredbufs.lock);
Here's a good reason for dropping the INIT_VIDC_LIST() macro
> +
> + v4l2_fh_del(&inst->fh);
> + v4l2_fh_exit(&inst->fh);
> +
> + kfree(inst);
> + return 0;
> +}
> +
> +static unsigned int vidc_poll(struct file *file, struct poll_table_struct *pt)
> +{
> + struct vidc_inst *inst = to_inst(file);
> + struct vb2_queue *outq = &inst->bufq_out;
> + struct vb2_queue *capq = &inst->bufq_cap;
> + unsigned int ret;
> +
> + ret = vb2_poll(outq, file, pt);
> + ret |= vb2_poll(capq, file, pt);
> +
> + return ret;
> +}
> +
> +static int vidc_mmap(struct file *file, struct vm_area_struct *vma)
> +{
> + struct vidc_inst *inst = to_inst(file);
> + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
> + int ret;
> +
> + if (offset < DST_QUEUE_OFF_BASE) {
> + ret = vb2_mmap(&inst->bufq_out, vma);
> + } else {
> + vma->vm_pgoff -= DST_QUEUE_OFF_BASE >> PAGE_SHIFT;
> + ret = vb2_mmap(&inst->bufq_cap, vma);
> + }
This feels hackish, is this really the way to do this?
> +
> + return ret;
> +}
> +
> +const struct v4l2_file_operations vidc_fops = {
> + .owner = THIS_MODULE,
> + .open = vidc_open,
> + .release = vidc_close,
> + .unlocked_ioctl = video_ioctl2,
> + .poll = vidc_poll,
> + .mmap = vidc_mmap,
> +#ifdef CONFIG_COMPAT
> + .compat_ioctl32 = v4l2_compat_ioctl32,
> +#endif
> +};
> +
> +static irqreturn_t vidc_isr_thread(int irq, void *dev_id)
> +{
> + return vidc_hfi_isr_thread(irq, dev_id);
> +}
> +
> +static irqreturn_t vidc_isr(int irq, void *dev)
> +{
> + return vidc_hfi_isr(irq, dev);
> +}
These two functions indicates that we're requesting the irq in the wrong
layer.
Also, these two functions arrives in a later patchset, so I assume this
doesn't compile...
> +
> +static int vidc_clks_get(struct vidc_core *core, unsigned int clks_num,
> + const char * const *clks_id)
> +{
> + struct device *dev = core->dev;
> + unsigned int i;
> +
> + for (i = 0; i < clks_num; i++) {
> + core->clks[i] = devm_clk_get(dev, clks_id[i]);
> + if (IS_ERR(core->clks[i]))
> + return PTR_ERR(core->clks[i]);
> + }
> +
> + return 0;
> +}
> +
> +static int
> +vidc_clks_enable(struct vidc_core *core, const struct vidc_resources *res)
> +{
> + unsigned int i;
> + int ret;
> +
> + for (i = 0; i < res->clks_num; i++) {
> + ret = clk_prepare_enable(core->clks[i]);
> + if (ret)
> + goto err;
> + }
> +
> + return 0;
> +err:
> + while (--i)
> + clk_disable_unprepare(core->clks[i]);
> +
> + return ret;
> +}
> +
> +static void
> +vidc_clks_disable(struct vidc_core *core, const struct vidc_resources *res)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < res->clks_num; i++)
> + clk_disable_unprepare(core->clks[i]);
> +}
> +
> +static const struct of_device_id vidc_dt_match[] = {
> + { .compatible = "qcom,vidc-msm8916", .data = &msm8916_res, },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(of, vidc_dt_match);
As you're using of_device_get_match_data() you can move this table to
the bottom of the file.
> +
> +static int vidc_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct vidc_core *core;
> + struct device_node *rproc;
> + struct resource *r;
> + int ret;
> +
> + core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL);
> + if (!core)
> + return -ENOMEM;
> +
> + core->dev = dev;
> + platform_set_drvdata(pdev, core);
> +
> + rproc = of_parse_phandle(dev->of_node, "rproc", 0);
> + if (IS_ERR(rproc))
> + return PTR_ERR(rproc);
> +
> + core->rproc = rproc_get_by_phandle(rproc->phandle);
FYI, We're hoping to land some patches shortly that will replace this
with rproc_get(pdev->dev.of_node), looking up an rproc by the standard
"rprocs" property...
> + if (IS_ERR(core->rproc))
> + return PTR_ERR(core->rproc);
> + else if (!core->rproc)
> + return -EPROBE_DEFER;
We're cleaning up this in the core as well.
You need to rproc_put() the rproc pointer after this point.
My question still stands though, if this driver should be probed as the
remoteproc is booted (or the apr service appearing). I will continue to
look at that.
> +
> + r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + core->base = devm_ioremap_resource(dev, r);
> + if (IS_ERR(core->base))
> + return PTR_ERR(core->base);
> +
> + core->irq = platform_get_irq(pdev, 0);
> + if (core->irq < 0)
> + return core->irq;
> +
> + core->res = of_device_get_match_data(dev);
> + if (!core->res)
> + return -ENODEV;
> +
> + ret = vidc_clks_get(core, core->res->clks_num, core->res->clks);
> + if (ret)
> + return ret;
> +
> + ret = dma_set_mask_and_coherent(dev, core->res->dma_mask);
> + if (ret)
> + return ret;
> +
> + INIT_LIST_HEAD(&core->instances);
> + mutex_init(&core->lock);
> +
> + ret = devm_request_threaded_irq(dev, core->irq, vidc_isr,
> + vidc_isr_thread,
> + IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
Drop this IRQF_TRIGGER_HIGH and have this be specified in devicetree.
> + "vidc", &core->hfi);
> + if (ret)
> + return ret;
> +
> + core->hfi.core_ops = &vidc_core_ops;
> + core->hfi.dev = dev;
> +
> + ret = vidc_hfi_create(&core->hfi, core->res, core->base);
> + if (ret)
> + return ret;
> +
> + ret = vidc_clks_enable(core, core->res);
> + if (ret)
> + goto err_hfi_destroy;
> +
> + ret = vidc_rproc_boot(core);
> + if (ret) {
> + vidc_clks_disable(core, core->res);
> + goto err_hfi_destroy;
> + }
> +
> + pm_runtime_enable(dev);
> +
> + ret = pm_runtime_get_sync(dev);
> + if (ret < 0)
> + goto err_runtime_disable;
> +
> + ret = vidc_hfi_core_init(&core->hfi);
> + if (ret)
> + goto err_rproc_shutdown;
> +
> + ret = pm_runtime_put_sync(dev);
> + if (ret)
> + goto err_core_deinit;
> +
> + vidc_clks_disable(core, core->res);
These operations follow the general pattern of booting other Qualcomm
remoteprocs; acquire and enable some resources, boot the core and
disable the resources. Therefor it looks quite likely that these
operations are related to the life cycle of the venus core, rather than
hfi.
> +
> + ret = v4l2_device_register(dev, &core->v4l2_dev);
> + if (ret)
> + goto err_core_deinit;
> +
> + ret = vdec_init(core, &core->vdev_dec);
> + if (ret)
> + goto err_dev_unregister;
> +
> + ret = venc_init(core, &core->vdev_enc);
> + if (ret)
> + goto err_vdec_deinit;
> +
> + return 0;
> +
> +err_vdec_deinit:
> + vdec_deinit(core, &core->vdev_dec);
> +err_dev_unregister:
> + v4l2_device_unregister(&core->v4l2_dev);
> +err_core_deinit:
> + vidc_hfi_core_deinit(&core->hfi);
> +err_rproc_shutdown:
> + vidc_rproc_shutdown(core);
> +err_runtime_disable:
> + pm_runtime_set_suspended(dev);
> + pm_runtime_disable(dev);
> +err_hfi_destroy:
> + vidc_hfi_destroy(&core->hfi);
> + return ret;
> +}
> +
> +static int vidc_remove(struct platform_device *pdev)
> +{
> + struct vidc_core *core = platform_get_drvdata(pdev);
> + int ret;
> +
> + ret = pm_runtime_get_sync(&pdev->dev);
> + if (ret < 0)
> + return ret;
No-one cares about you returning an error here, so you better move
forward and release as much of your resources as possible even though
you didn't get your pm.
> +
> + ret = vidc_hfi_core_deinit(&core->hfi);
> + if (ret) {
> + pm_runtime_put_sync(&pdev->dev);
> + return ret;
> + }
> +
> + vidc_rproc_shutdown(core);
> +
> + ret = pm_runtime_put_sync(&pdev->dev);
> +
> + vidc_hfi_destroy(&core->hfi);
> + vdec_deinit(core, &core->vdev_dec);
> + venc_deinit(core, &core->vdev_enc);
> + v4l2_device_unregister(&core->v4l2_dev);
> +
> + pm_runtime_disable(core->dev);
> +
> + return ret < 0 ? ret : 0;
> +}
> +
> +static int vidc_runtime_suspend(struct device *dev)
> +{
> + struct vidc_core *core = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = vidc_hfi_core_suspend(&core->hfi);
> +
> + vidc_clks_disable(core, core->res);
> +
> + return ret;
> +}
> +
> +static int vidc_runtime_resume(struct device *dev)
> +{
> + struct vidc_core *core = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = vidc_clks_enable(core, core->res);
> + if (ret)
> + return ret;
> +
> + return vidc_hfi_core_resume(&core->hfi);
> +}
> +
> +static int vidc_pm_suspend(struct device *dev)
> +{
> + return vidc_runtime_suspend(dev);
> +}
> +
> +static int vidc_pm_resume(struct device *dev)
> +{
> + return vidc_runtime_resume(dev);
> +}
> +
> +static const struct dev_pm_ops vidc_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(vidc_pm_suspend, vidc_pm_resume)
> + SET_RUNTIME_PM_OPS(vidc_runtime_suspend, vidc_runtime_resume, NULL)
> +};
> +
> +static struct platform_driver qcom_vidc_driver = {
> + .probe = vidc_probe,
> + .remove = vidc_remove,
> + .driver = {
> + .name = "qcom-vidc",
> + .of_match_table = vidc_dt_match,
> + .pm = &vidc_pm_ops,
> + },
> +};
> +
> +module_platform_driver(qcom_vidc_driver);
> +
> +MODULE_ALIAS("platform:qcom-vidc");
> +MODULE_DESCRIPTION("Qualcomm video encoder and decoder driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/media/platform/qcom/vidc/core.h b/drivers/media/platform/qcom/vidc/core.h
> new file mode 100644
> index 000000000000..5dc8e05f8c36
> --- /dev/null
> +++ b/drivers/media/platform/qcom/vidc/core.h
> @@ -0,0 +1,196 @@
> +/*
> + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
> + * Copyright (C) 2016 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __VIDC_CORE_H_
> +#define __VIDC_CORE_H_
> +
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/videobuf2-core.h>
> +
> +#include "resources.h"
> +#include "hfi.h"
> +
> +#define VIDC_DRV_NAME "vidc"
Unused
> +
> +struct vidc_list {
> + struct list_head list;
> + struct mutex lock;
> +};
Can't we get away without passing around lockable lists? Does these
lists have to be locked independently and should we really pass around
their lock with them?
> +
> +struct vidc_format {
> + u32 pixfmt;
> + int num_planes;
> + u32 type;
> +};
> +
> +struct vidc_core {
> + struct list_head list;
This list_head seems unused.
> + void __iomem *base;
base is acquired and passed by value to vidc_hfi_create(), so no need to
keep track of it here.
> + int irq;
This irq belongs to hfi, so it should probably be kept there.
> + struct clk *clks[VIDC_CLKS_NUM_MAX];
> + struct mutex lock;
This "lock" seems to be only related the instances list, please name it
more appropriately - and place it next to the instances member.
> + struct hfi_core hfi;
> + struct video_device vdev_dec;
> + struct video_device vdev_enc;
> + struct v4l2_device v4l2_dev;
> + struct list_head instances;
> + const struct vidc_resources *res;
> + struct rproc *rproc;
> + bool rproc_booted;
> + struct device *dev;
> +};
> +
> +struct vdec_controls {
> + u32 post_loop_deb_mode;
> + u32 profile;
> + u32 level;
> +};
> +
> +struct venc_controls {
> + u16 gop_size;
> + u32 idr_period;
> + u32 num_p_frames;
> + u32 num_b_frames;
> + u32 bitrate_mode;
> + u32 bitrate;
> + u32 bitrate_peak;
> +
> + u32 h264_i_period;
> + u32 h264_entropy_mode;
> + u32 h264_i_qp;
> + u32 h264_p_qp;
> + u32 h264_b_qp;
> + u32 h264_min_qp;
> + u32 h264_max_qp;
> + u32 h264_loop_filter_mode;
> + u32 h264_loop_filter_alpha;
> + u32 h264_loop_filter_beta;
> +
> + u32 vp8_min_qp;
> + u32 vp8_max_qp;
> +
> + u32 multi_slice_mode;
> + u32 multi_slice_max_bytes;
> + u32 multi_slice_max_mb;
> +
> + u32 header_mode;
> +
> + u32 profile;
> + u32 level;
> +};
> +
> +struct vidc_inst {
> + struct list_head list;
> + struct mutex lock;
> + struct vidc_core *core;
> +
> + struct vidc_list scratchbufs;
> + struct vidc_list persistbufs;
> + struct vidc_list registeredbufs;
Just inline the list_head and mutex here, as it's done for bufqueue.
> +
> + struct list_head bufqueue;
> + struct mutex bufqueue_lock;
> +
> + int streamoff;
> + int streamon;
> + struct vb2_queue bufq_out;
> + struct vb2_queue bufq_cap;
> +
> + struct v4l2_ctrl_handler ctrl_handler;
> + union {
> + struct vdec_controls dec;
> + struct venc_controls enc;
> + } controls;
> + struct v4l2_fh fh;
> +
> + struct hfi_inst *hfi_inst;
> +
> + /* session fields */
> + u32 session_type;
> + u32 width;
> + u32 height;
> + u32 out_width;
> + u32 out_height;
> + u32 colorspace;
> + u8 ycbcr_enc;
> + u8 quantization;
> + u8 xfer_func;
> + u64 fps;
> + struct v4l2_fract timeperframe;
> + const struct vidc_format *fmt_out;
> + const struct vidc_format *fmt_cap;
> + unsigned int num_input_bufs;
> + unsigned int num_output_bufs;
> + bool in_reconfig;
> + u32 reconfig_width;
> + u32 reconfig_height;
> + u64 sequence;
> +};
> +
> +#define ctrl_to_inst(ctrl) \
> + container_of(ctrl->handler, struct vidc_inst, ctrl_handler)
> +
> +struct vidc_ctrl {
> + u32 id;
> + enum v4l2_ctrl_type type;
> + s32 min;
> + s32 max;
> + s32 def;
> + u32 step;
> + u64 menu_skip_mask;
> + u32 flags;
> + const char * const *qmenu;
> +};
> +
> +/*
> + * Offset base for buffers on the destination queue - used to distinguish
> + * between source and destination buffers when mmapping - they receive the same
> + * offsets but for different queues
> + */
> +#define DST_QUEUE_OFF_BASE (1 << 30)
> +
> +extern const struct v4l2_file_operations vidc_fops;
Just pass this to v{dec,enc}_init() rather than back-referencing it
through a global variable. But on the other hand this is unused in this
patchset...
> +
> +static inline void INIT_VIDC_LIST(struct vidc_list *mlist)
> +{
> + mutex_init(&mlist->lock);
> + INIT_LIST_HEAD(&mlist->list);
> +}
> +
> +static inline struct vidc_inst *to_inst(struct file *filp)
> +{
> + return container_of(filp->private_data, struct vidc_inst, fh);
> +}
> +
> +static inline struct hfi_inst *to_hfi_inst(struct file *filp)
Unused
> +{
> + return to_inst(filp)->hfi_inst;
> +}
> +
> +static inline struct vb2_queue *
> +vidc_to_vb2q(struct file *file, enum v4l2_buf_type type)
Unused
> +{
> + struct vidc_inst *inst = to_inst(file);
> +
> + if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
> + return &inst->bufq_cap;
> + else if (type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> + return &inst->bufq_out;
> +
> + return NULL;
> +}
> +
> +#endif
> diff --git a/drivers/media/platform/qcom/vidc/helpers.c b/drivers/media/platform/qcom/vidc/helpers.c
> new file mode 100644
> index 000000000000..81079f2b5ed1
> --- /dev/null
> +++ b/drivers/media/platform/qcom/vidc/helpers.c
> @@ -0,0 +1,394 @@
> +/*
> + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
> + * Copyright (C) 2016 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +#include <linux/list.h>
> +#include <linux/mutex.h>
> +#include <linux/pm_runtime.h>
> +#include <media/videobuf2-dma-sg.h>
> +
> +#include "helpers.h"
> +#include "int_bufs.h"
> +#include "load.h"
> +#include "hfi_helper.h"
> +
> +static int session_set_buf(struct vb2_buffer *vb)
> +{
> + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> + struct vb2_queue *q = vb->vb2_queue;
> + struct vidc_inst *inst = vb2_get_drv_priv(q);
> + struct vidc_core *core = inst->core;
> + struct device *dev = core->dev;
> + struct hfi_core *hfi = &core->hfi;
> + struct vidc_buffer *buf = to_vidc_buffer(vbuf);
> + struct hfi_frame_data fdata;
> + int ret;
> +
> + memset(&fdata, 0, sizeof(fdata));
> +
> + fdata.alloc_len = vb2_plane_size(vb, 0);
> + fdata.device_addr = buf->dma_addr;
> + fdata.timestamp = vb->timestamp;
> + fdata.flags = 0;
> + fdata.clnt_data = buf->dma_addr;
> +
> + if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
> + fdata.buffer_type = HFI_BUFFER_INPUT;
> + fdata.filled_len = vb2_get_plane_payload(vb, 0);
> + fdata.offset = vb->planes[0].data_offset;
> +
> + if (vbuf->flags & V4L2_BUF_FLAG_LAST || !fdata.filled_len)
> + fdata.flags |= HFI_BUFFERFLAG_EOS;
> +
> + ret = vidc_hfi_session_etb(hfi, inst->hfi_inst, &fdata);
> + } else if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
> + fdata.buffer_type = HFI_BUFFER_OUTPUT;
> + fdata.filled_len = 0;
> + fdata.offset = 0;
> +
> + ret = vidc_hfi_session_ftb(hfi, inst->hfi_inst, &fdata);
> + } else {
> + ret = -EINVAL;
> + }
> +
> + if (ret) {
> + dev_err(dev, "failed to set session buffer (%d)\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int session_unregister_bufs(struct vidc_inst *inst)
> +{
> + struct device *dev = inst->core->dev;
> + struct hfi_core *hfi = &inst->core->hfi;
> + struct hfi_buffer_desc *bd;
> + struct vidc_buffer *buf, *tmp;
> + int ret = 0;
> +
> + mutex_lock(&inst->registeredbufs.lock);
> + list_for_each_entry_safe(buf, tmp, &inst->registeredbufs.list,
> + hfi_list) {
> + list_del(&buf->hfi_list);
So the hfi_list is the list_head for entries in the _vidc_ instance
list?
> + bd = &buf->bd;
> + bd->response_required = 1;
> + ret = vidc_hfi_session_unset_buffers(hfi, inst->hfi_inst, bd);
> + if (ret) {
> + dev_err(dev, "%s: session release buffers failed\n",
> + __func__);
> + break;
> + }
> + }
> + mutex_unlock(&inst->registeredbufs.lock);
> +
> + return ret;
> +}
> +
> +static int session_register_bufs(struct vidc_inst *inst)
> +{
> + struct device *dev = inst->core->dev;
> + struct hfi_core *hfi = &inst->core->hfi;
> + struct hfi_buffer_desc *bd;
> + struct vidc_buffer *buf, *tmp;
> + int ret = 0;
> +
> + mutex_lock(&inst->registeredbufs.lock);
> + list_for_each_entry_safe(buf, tmp, &inst->registeredbufs.list,
> + hfi_list) {
> + bd = &buf->bd;
> + ret = vidc_hfi_session_set_buffers(hfi, inst->hfi_inst, bd);
> + if (ret) {
> + dev_err(dev, "%s: session: set buffer failed\n",
> + __func__);
> + break;
> + }
> + }
> + mutex_unlock(&inst->registeredbufs.lock);
> +
> + return ret;
> +}
> +
> +int vidc_buf_descs(struct vidc_inst *inst, u32 type,
> + struct hfi_buffer_requirements *out)
If you call this vidc_get_buf_requirements() it would actually describe
what's going on. But why is this hfi wrapper in the core, rather than
just have the internal buffer manager call it directly.
The call doesn't seem to depend on the parameters or state, can we
cache the result?
> +{
> + struct hfi_core *hfi = &inst->core->hfi;
> + u32 ptype = HFI_PROPERTY_CONFIG_BUFFER_REQUIREMENTS;
> + union hfi_get_property hprop;
> + int ret, i;
> +
> + if (out)
> + memset(out, 0, sizeof(*out));
> +
> + ret = vidc_hfi_session_get_property(hfi, inst->hfi_inst, ptype, &hprop);
> + if (ret)
> + return ret;
> +
> + ret = -EINVAL;
> +
> + for (i = 0; i < HFI_BUFFER_TYPE_MAX; i++) {
> + if (hprop.bufreq[i].type != type)
> + continue;
> +
> + if (out)
> + memcpy(out, &hprop.bufreq[i], sizeof(*out));
> + ret = 0;
> + break;
> + }
> +
> + return ret;
> +}
> +
[..]
> +
> +void vidc_vb2_stop_streaming(struct vb2_queue *q)
> +{
> + struct vidc_inst *inst = vb2_get_drv_priv(q);
> + struct hfi_inst *hfi_inst = inst->hfi_inst;
> + struct vidc_core *core = inst->core;
> + struct device *dev = core->dev;
> + struct hfi_core *hfi = &core->hfi;
> + int ret, streamoff;
> +
> + mutex_lock(&inst->lock);
> + streamoff = inst->streamoff;
> + mutex_unlock(&inst->lock);
> +
> + if (streamoff)
> + return;
> +
> + mutex_lock(&inst->lock);
> + if (inst->streamon == 0) {
> + mutex_unlock(&inst->lock);
> + return;
> + }
> + mutex_unlock(&inst->lock);
Why do we keep track of streamon and stream off, why isn't streamoff
ever cleared? Why don't we check both conditions in one critical region?
> +
> + ret = vidc_hfi_session_stop(hfi, inst->hfi_inst);
> + if (ret) {
> + dev_err(dev, "session: stop failed (%d)\n", ret);
> + goto abort;
When are we going to relaim the buffers in these cases?
> + }
> +
> + ret = vidc_hfi_session_unload_res(hfi, inst->hfi_inst);
> + if (ret) {
> + dev_err(dev, "session: release resources failed (%d)\n", ret);
> + goto abort;
> + }
> +
> + ret = session_unregister_bufs(inst);
> + if (ret) {
> + dev_err(dev, "failed to release capture buffers: %d\n", ret);
> + goto abort;
> + }
> +
> + ret = internal_bufs_free(inst);
> +
> + if (hfi_inst->state == INST_INVALID || hfi->state == CORE_INVALID) {
> + ret = -EINVAL;
> + goto abort;
> + }
> +
> +abort:
> + if (ret)
> + vidc_hfi_session_abort(hfi, inst->hfi_inst);
> +
> + vidc_scale_clocks(inst->core);
> +
> + ret = vidc_hfi_session_deinit(hfi, inst->hfi_inst);
> +
> + mutex_lock(&inst->lock);
> + inst->streamoff = 1;
> + mutex_unlock(&inst->lock);
> +
> + if (ret)
> + dev_err(dev, "stop streaming failed type: %d, ret: %d\n",
> + q->type, ret);
> +
> + ret = pm_runtime_put_sync(dev);
> + if (ret < 0)
> + dev_err(dev, "%s: pm_runtime_put_sync (%d)\n", __func__, ret);
> +}
> +
> +int vidc_vb2_start_streaming(struct vidc_inst *inst)
> +{
> + struct device *dev = inst->core->dev;
> + struct hfi_core *hfi = &inst->core->hfi;
> + struct vidc_buffer *buf, *n;
> + int ret;
> +
> + ret = session_register_bufs(inst);
> + if (ret)
> + return ret;
> +
> + ret = internal_bufs_alloc(inst);
> + if (ret)
> + return ret;
> +
> + vidc_scale_clocks(inst->core);
> +
> + ret = vidc_hfi_session_load_res(hfi, inst->hfi_inst);
> + if (ret) {
> + dev_err(dev, "session: load resources (%d)\n", ret);
> + return ret;
> + }
> +
> + ret = vidc_hfi_session_start(hfi, inst->hfi_inst);
> + if (ret) {
> + dev_err(dev, "session: start failed (%d)\n", ret);
> + return ret;
> + }
> +
> + mutex_lock(&inst->bufqueue_lock);
> + list_for_each_entry_safe(buf, n, &inst->bufqueue, list) {
> + ret = session_set_buf(&buf->vb.vb2_buf);
> + if (ret)
> + break;
> + }
> + mutex_unlock(&inst->bufqueue_lock);
> +
> + if (!ret) {
> + mutex_lock(&inst->lock);
> + inst->streamon = 1;
> + mutex_unlock(&inst->lock);
> + }
> +
> + return ret;
> +}
> diff --git a/drivers/media/platform/qcom/vidc/helpers.h b/drivers/media/platform/qcom/vidc/helpers.h
> new file mode 100644
> index 000000000000..a151c96bf939
> --- /dev/null
> +++ b/drivers/media/platform/qcom/vidc/helpers.h
> @@ -0,0 +1,43 @@
> +/*
> + * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
> + * Copyright (C) 2016 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +#ifndef __VIDC_COMMON_H__
> +#define __VIDC_COMMON_H__
s/COMMON/HELPERS/
> +
> +#include <linux/list.h>
> +#include <media/videobuf2-v4l2.h>
> +
> +#include "core.h"
> +
> +struct vidc_buffer {
> + struct vb2_v4l2_buffer vb;
> + struct list_head list;
> + dma_addr_t dma_addr;
> + struct list_head hfi_list;
This seems to be the list_head used for associating buffers to the
_vidc_ instances.
> + struct hfi_buffer_desc bd;
> +};
> +
> +#define to_vidc_buffer(buf) container_of(buf, struct vidc_buffer, vb)
> +
> +struct vb2_v4l2_buffer *
> +vidc_vb2_find_buf(struct vidc_inst *inst, dma_addr_t addr);
> +int vidc_vb2_buf_init(struct vb2_buffer *vb);
> +int vidc_vb2_buf_prepare(struct vb2_buffer *vb);
> +void vidc_vb2_buf_queue(struct vb2_buffer *vb);
> +void vidc_vb2_stop_streaming(struct vb2_queue *q);
> +int vidc_vb2_start_streaming(struct vidc_inst *inst);
> +int vidc_buf_descs(struct vidc_inst *inst, u32 type,
> + struct hfi_buffer_requirements *out);
> +int vidc_set_color_format(struct vidc_inst *inst, u32 type, u32 fmt);
> +#endif
> diff --git a/drivers/media/platform/qcom/vidc/int_bufs.c b/drivers/media/platform/qcom/vidc/int_bufs.c
[..]
> +
> +static int internal_alloc_and_set(struct vidc_inst *inst,
> + struct hfi_buffer_requirements *bufreq,
> + struct vidc_list *buf_list)
> +{
> + struct vidc_internal_buf *buf;
> + struct vidc_mem *mem;
> + unsigned int i;
> + int ret = 0;
> +
> + if (!bufreq->size)
> + return 0;
> +
> + for (i = 0; i < bufreq->count_actual; i++) {
> + mem = mem_alloc(inst->core->dev, bufreq->size, 0);
Inline mem_alloc here; might need to make sure bufreq->size is 4K
aligned.
> + if (IS_ERR(mem)) {
> + ret = PTR_ERR(mem);
> + goto err_no_mem;
> + }
> +
> + buf = kzalloc(sizeof(*buf), GFP_KERNEL);
> + if (!buf) {
> + ret = -ENOMEM;
> + goto fail_kzalloc;
> + }
> +
> + buf->mem = mem;
> + buf->type = bufreq->type;
> +
> + ret = internal_set_buf_on_fw(inst, bufreq->type, mem, false);
> + if (ret)
> + goto fail_set_buffers;
> +
> + mutex_lock(&buf_list->lock);
> + list_add_tail(&buf->list, &buf_list->list);
> + mutex_unlock(&buf_list->lock);
> + }
> +
> + return ret;
> +
> +fail_set_buffers:
> + kfree(buf);
> +fail_kzalloc:
> + mem_free(mem);
> +err_no_mem:
> + return ret;
> +}
> +
[..]
> +
> +static int persist_set_buffer(struct vidc_inst *inst, u32 type)
> +{
> + struct hfi_buffer_requirements bufreq;
> + int ret;
> +
> + ret = vidc_buf_descs(inst, type, &bufreq);
> + if (ret)
> + return 0;
> +
> + mutex_lock(&inst->persistbufs.lock);
> + if (!list_empty(&inst->persistbufs.list)) {
This function is called twice, with type HFI_BUFFER_INTERNAL_PERSIST and
HFI_BUFFER_INTERNAL_PERSIST_1 respectively. Unless the buffer
requirements are missing for HFI_BUFFER_INTERNAL_PERSIST persistbufs
won't be empty and we will skip the later allocation.
> + mutex_unlock(&inst->persistbufs.lock);
> + return 0;
> + }
> + mutex_unlock(&inst->persistbufs.lock);
> +
> + return internal_alloc_and_set(inst, &bufreq, &inst->persistbufs);
> +}
> +
[..]
> +
> +static int scratch_set_buffers(struct vidc_inst *inst)
> +{
> + struct device *dev = inst->core->dev;
> + int ret;
> +
> + ret = scratch_unset_buffers(inst, true);
> + if (ret)
> + dev_warn(dev, "Failed to release scratch buffers\n");
internal_bufs_free() calls scratch_unset_buffers(reuse=false) so we're
coming here with an empty scratchbufs either way - meaning that this
whole file can be greatly simplified.
So instead of trying to fix that I would suggest that you just let
internal_bufs_alloc() acquire the buffer requirements and call
internal_alloc_and_set() directly, storing the result in a single list.
And then inline a free method in internal_bufs_free() as well as drop
all reuse-stuff and unused/dead code.
That would simplify this file quite a bit and if there actually is a
need for the reusing of buffer that can be added at some later time.
> +
> + ret = scratch_set_buffer(inst, HFI_BUFFER_INTERNAL_SCRATCH);
> + if (ret)
> + goto error;
> +
> + ret = scratch_set_buffer(inst, HFI_BUFFER_INTERNAL_SCRATCH_1);
> + if (ret)
> + goto error;
> +
> + ret = scratch_set_buffer(inst, HFI_BUFFER_INTERNAL_SCRATCH_2);
> + if (ret)
> + goto error;
> +
> + return 0;
> +error:
> + scratch_unset_buffers(inst, false);
> + return ret;
> +}
> +
> +static int persist_set_buffers(struct vidc_inst *inst)
> +{
> + int ret;
> +
> + ret = persist_set_buffer(inst, HFI_BUFFER_INTERNAL_PERSIST);
> + if (ret)
> + goto error;
> +
> + ret = persist_set_buffer(inst, HFI_BUFFER_INTERNAL_PERSIST_1);
> + if (ret)
> + goto error;
> +
> + return 0;
> +
> +error:
> + persist_unset_buffers(inst);
> + return ret;
> +}
> +
> +int internal_bufs_alloc(struct vidc_inst *inst)
> +{
> + struct device *dev = inst->core->dev;
> + int ret;
> +
> + ret = scratch_set_buffers(inst);
> + if (ret) {
> + dev_err(dev, "set scratch buffers (%d)\n", ret);
> + return ret;
> + }
> +
> + ret = persist_set_buffers(inst);
> + if (ret) {
> + dev_err(dev, "set persist buffers (%d)\n", ret);
> + goto error;
> + }
> +
> + return 0;
> +
> +error:
> + scratch_unset_buffers(inst, false);
> + return ret;
> +}
> +
> +int internal_bufs_free(struct vidc_inst *inst)
> +{
> + struct device *dev = inst->core->dev;
> + int ret;
> +
> + ret = scratch_unset_buffers(inst, false);
> + if (ret)
> + dev_err(dev, "failed to release scratch buffers: %d\n", ret);
> +
> + ret = persist_unset_buffers(inst);
> + if (ret)
> + dev_err(dev, "failed to release persist buffers: %d\n", ret);
> +
> + return ret;
> +}
> diff --git a/drivers/media/platform/qcom/vidc/int_bufs.h b/drivers/media/platform/qcom/vidc/int_bufs.h
> new file mode 100644
> index 000000000000..5f8b2b85839f
> --- /dev/null
> +++ b/drivers/media/platform/qcom/vidc/int_bufs.h
> @@ -0,0 +1,23 @@
> +/*
> + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
> + * Copyright (C) 2016 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +#ifndef __VIDC_INTERNAL_BUFFERS_H__
> +#define __VIDC_INTERNAL_BUFFERS_H__
> +
> +struct vidc_inst;
> +
> +int internal_bufs_alloc(struct vidc_inst *inst);
> +int internal_bufs_free(struct vidc_inst *inst);
> +
> +#endif
> diff --git a/drivers/media/platform/qcom/vidc/load.c b/drivers/media/platform/qcom/vidc/load.c
> new file mode 100644
> index 000000000000..8ae25fc0e8a5
> --- /dev/null
> +++ b/drivers/media/platform/qcom/vidc/load.c
> @@ -0,0 +1,104 @@
> +/*
> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
> + * Copyright (C) 2016 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/clk.h>
> +
> +#include "core.h"
> +#include "load.h"
> +
> +static u32 get_inst_load(struct vidc_inst *inst)
> +{
> + int mbs;
> + u32 w = inst->width;
> + u32 h = inst->height;
> +
> + if (!inst->hfi_inst || !(inst->hfi_inst->state >= INST_INIT &&
> + inst->hfi_inst->state < INST_STOP))
> + return 0;
> +
> + mbs = (ALIGN(w, 16) / 16) * (ALIGN(h, 16) / 16);
> +
> + return mbs * inst->fps;
> +}
> +
> +static u32 get_load(struct vidc_core *core, u32 session_type)
> +{
> + struct vidc_inst *inst = NULL;
> + u32 mbs_per_sec = 0;
> +
> + mutex_lock(&core->lock);
> + list_for_each_entry(inst, &core->instances, list) {
> + if (inst->session_type != session_type)
> + continue;
> +
> + mbs_per_sec += get_inst_load(inst);
> + }
> + mutex_unlock(&core->lock);
> +
> + return mbs_per_sec;
> +}
> +
> +static int scale_clocks_load(struct vidc_core *core, u32 mbs_per_sec)
> +{
> + const struct freq_tbl *table = core->res->freq_tbl;
> + int num_rows = core->res->freq_tbl_size;
> + struct clk *clk = core->clks[0];
Using individual clk pointers instead of this array would make this
"core_clk" easier to follow.
> + struct device *dev = core->dev;
> + unsigned long freq = table[0].freq;
> + int ret, i;
> +
> + if (!mbs_per_sec && num_rows > 1) {
> + freq = table[num_rows - 1].freq;
> + goto set_freq;
> + }
Here we will set freq to the last entry in the freq table, potentially
table[0] if num_rows == 1, so the second part of the conditional doesn't
add any value and you can skip the early initialization above.
And you can put the loop below in an else block instead of using a goto.
> +
> + for (i = 0; i < num_rows; i++) {
> + if (mbs_per_sec > table[i].load)
> + break;
> + freq = table[i].freq;
> + }
> +
> +set_freq:
> +
> + ret = clk_set_rate(clk, freq);
> + if (ret) {
> + dev_err(dev, "failed to set clock rate %lu (%d)\n", freq, ret);
> + return ret;
> + }
> +
> + return 0;
ret will be 0 here, so print the error message conditionally and then
just return ret.
> +}
> +
> +int vidc_scale_clocks(struct vidc_core *core)
This is only called from helpers.c, drop this file and move the
implementation there.
> +{
> + struct device *dev = core->dev;
> + u32 mbs_per_sec;
> + int ret;
> +
> + mbs_per_sec = get_load(core, VIDC_SESSION_TYPE_ENC) +
> + get_load(core, VIDC_SESSION_TYPE_DEC);
> +
> + if (mbs_per_sec > core->res->max_load) {
> + dev_warn(dev, "HW is overloaded, needed: %d max: %d\n",
> + mbs_per_sec, core->res->max_load);
> + return -EBUSY;
> + }
> +
> + ret = scale_clocks_load(core, mbs_per_sec);
> + if (ret)
> + dev_warn(dev, "failed to scale clocks, performance might be impacted\n");
> +
> + return 0;
> +}
[..]
> diff --git a/drivers/media/platform/qcom/vidc/mem.c b/drivers/media/platform/qcom/vidc/mem.c
> new file mode 100644
> index 000000000000..6a83b5784410
> --- /dev/null
> +++ b/drivers/media/platform/qcom/vidc/mem.c
> @@ -0,0 +1,64 @@
> +/*
> + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
> + * Copyright (C) 2016 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/device.h>
> +#include <linux/dma-direction.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/err.h>
> +#include <linux/slab.h>
> +
> +#include "mem.h"
> +
> +struct vidc_mem *mem_alloc(struct device *dev, size_t size, int map_kernel)
This is a terrible name for a global function.
But I think you can favorably inline this into the two callers. They
both have their own tracking objects. So just drop this entire file.
> +{
> + struct vidc_mem *mem;
> +
> + if (!size)
> + return ERR_PTR(-EINVAL);
> +
> + if (IS_ERR(dev))
> + return ERR_CAST(dev);
> +
> + mem = kzalloc(sizeof(*mem), GFP_KERNEL);
> + if (!mem)
> + return ERR_PTR(-ENOMEM);
> +
> + mem->size = ALIGN(size, SZ_4K);
> + mem->iommu_dev = dev;
> +
> + mem->attrs = DMA_ATTR_WRITE_COMBINE;
> +
> + if (!map_kernel)
> + mem->attrs |= DMA_ATTR_NO_KERNEL_MAPPING;
> +
> + mem->kvaddr = dma_alloc_attrs(mem->iommu_dev, mem->size, &mem->da,
> + GFP_KERNEL, mem->attrs);
> + if (!mem->kvaddr) {
> + kfree(mem);
> + return ERR_PTR(-ENOMEM);
> + }
> +
> + return mem;
> +}
> +
> +void mem_free(struct vidc_mem *mem)
> +{
> + if (!mem)
> + return;
> +
> + dma_free_attrs(mem->iommu_dev, mem->size, mem->kvaddr,
> + mem->da, mem->attrs);
> + kfree(mem);
> +};
[..]
> diff --git a/drivers/media/platform/qcom/vidc/resources.c b/drivers/media/platform/qcom/vidc/resources.c
> new file mode 100644
> index 000000000000..e00ed1caa824
> --- /dev/null
> +++ b/drivers/media/platform/qcom/vidc/resources.c
> @@ -0,0 +1,46 @@
> +/*
> + * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
> + * Copyright (C) 2016 Linaro Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +#include <linux/bug.h>
> +#include <linux/types.h>
> +#include <linux/kernel.h>
> +
> +#include "hfi.h"
> +
> +static const struct freq_tbl msm8916_freq_table[] = {
> + { 352800, 228570000 }, /* 1920x1088 @ 30 + 1280x720 @ 30 */
> + { 244800, 160000000 }, /* 1920x1088 @ 30 */
> + { 108000, 100000000 }, /* 1280x720 @ 30 */
> +};
> +
> +static const struct reg_val msm8916_reg_preset[] = {
> + { 0xe0020, 0x05555556 },
> + { 0xe0024, 0x05555556 },
> + { 0x80124, 0x00000003 },
> +};
> +
> +const struct vidc_resources msm8916_res = {
> + .freq_tbl = msm8916_freq_table,
> + .freq_tbl_size = ARRAY_SIZE(msm8916_freq_table),
> + .reg_tbl = msm8916_reg_preset,
> + .reg_tbl_size = ARRAY_SIZE(msm8916_reg_preset),
> + .clks = {"core", "iface", "bus", },
> + .clks_num = 3,
> + .max_load = 352800, /* 720p@30 + 1080p@30 */
> + .hfi_version = 0,
Unused
> + .vmem_id = VIDC_RESOURCE_NONE,
Unused
> + .vmem_size = 0,
Unused
> + .vmem_addr = 0,
Unused
> + .dma_mask = 0xddc00000 - 1,
> +};
These tables could with favor be moved next to the of_table in vidc.c
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
