There are two big tables here that are very hard to adjust its
size.
The first one would fit into one page, but the latex.py logic
at Sphinx auto-switches to longtable when there are more than 30
rows. There's no way to override without coding.
The second one is really big, and won't fit on a single page.
So, it has to use tiny font to fit.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
Documentation/media/uapi/v4l/subdev-formats.rst | 36 ++++++++++++++++++++-----
1 file changed, 30 insertions(+), 6 deletions(-)
diff --git a/Documentation/media/uapi/v4l/subdev-formats.rst b/Documentation/media/uapi/v4l/subdev-formats.rst
index a347fcc206db..0b31943bb300 100644
--- a/Documentation/media/uapi/v4l/subdev-formats.rst
+++ b/Documentation/media/uapi/v4l/subdev-formats.rst
@@ -154,18 +154,26 @@ half of the green value) transferred first will be named
The following tables list existing packed RGB formats.
-.. FIXME: I was unable to find a way to use adjustbox or landscape for this table!
+.. HACK: ideally, we would be using adjustbox here. However, Sphinx
+.. is a very bad behaviored guy: if the table has more than 30 cols,
+.. it switches to long table, and there's no way to override it.
-.. tabularcolumns:: |p{7.6cm}|p{1.6cm}|p{0.7cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{-1.0cm}|
+
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22}|
.. _v4l2-mbus-pixelcode-rgb:
+.. raw:: latex
+
+ \begingroup
+ \tiny
+ \setlength{\tabcolsep}{2pt}
+
.. flat-table:: RGB formats
:header-rows: 2
:stub-columns: 0
:widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-
- .. row 1
- Identifier
@@ -2355,6 +2363,10 @@ The following tables list existing packed RGB formats.
- b\ :sub:`0`
+.. raw:: latex
+
+ \endgroup
+
On LVDS buses, usually each sample is transferred serialized in seven
time slots per pixel clock, on three (18-bit) or four (24-bit)
differential data pairs at the same time. The remaining bits are used
@@ -3751,13 +3763,22 @@ the following codes.
- d for dummy bits
-.. FIXME: I was unable to find a way to use adjustbox or landscape for this table!
-.. tabularcolumns:: |p{7.6cm}|p{1.6cm}|p{0.7cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{0.5cm}|p{-1.0cm}|
+.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22}|
.. _v4l2-mbus-pixelcode-yuv8:
-.. cssclass:: longtable
+
+.. HACK: ideally, we would be using adjustbox here. However, this
+.. will never work for this table, as, even with tiny font, it is
+.. to big for a single page. So, we need to manually adjust the
+.. size.
+
+.. raw:: latex
+
+ \begingroup
+ \tiny
+ \setlength{\tabcolsep}{2pt}
.. flat-table:: YUV Formats
:header-rows: 2
@@ -11439,6 +11460,9 @@ the following codes.
- v\ :sub:`0`
+.. raw:: latex
+
+ \endgroup
HSV/HSL Formats
^^^^^^^^^^^^^^^
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
