Hi, I have an Ion Video 2 PC and a StarTech svid2usb23 (id: 0xeb1a, 0x5051). I have documented them here: https://linuxtv.org/wiki/index.php/Ion_Video_2_PC I can get them to be recognized by patching the em28xx driver. I use "EM2860_BOARD_TVP5150_REFERENCE_DESIGN". (The patch can be found here: https://www.linuxtv.org/wiki/index.php/Ion_Video_2_PC#Making_it_work) Yet, it almost works, there is only one bug. When I plug something yellow composite input of the device, it captures one frame then stops. If I disconnect the composite video so that there is no video input, then it starts capturing frames again. So the device doesn't want to capture video when there is input, it only captures frames when their is nothing connected to it. I can see that it stops capturing frames by looking at the frame counter in qv4l2. I have made a video about this problem: https://youtu.be/z96OfgHGDao?t=40s You can see what I explained in the previous paragraph at 1:58 in the video. These are the chips inside the Ion Video 2 PC: * Empia EM2860 * Empia EMP202 * 5150AM1 What would be the next thing to do to make it work? Thanks. Best regards, Alexandre -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
