Hello Sakari,
On 08/16/2016 04:47 PM, Sakari Ailus wrote:
> Hi Javier,
>
> Javier Martinez Canillas wrote:
>> Hello Hans,
>>
>> Thanks a lot for your feedback.
>>
>> On 08/13/2016 09:47 AM, Hans Verkuil wrote:
>>> On 07/20/2016 08:22 PM, Javier Martinez Canillas wrote:
>>>> Currently the dma-buf is unmapped when the buffer is dequeued by userspace
>>>> but it's not used anymore after the driver finished processing the buffer.
>>>>
>>>> So instead of doing the dma-buf unmapping in __vb2_dqbuf(), it can be made
>>>> in vb2_buffer_done() after the driver notified that buf processing is done.
>>>>
>>>> Decoupling the buffer dequeue from the dma-buf unmapping has also the side
>>>> effect of making possible to add dma-buf fence support in the future since
>>>> the buffer could be dequeued even before the driver has finished using it.
>>>>
>>>> Signed-off-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
>>>>
>>>> ---
>>>> Hello,
>>>>
>>>> I've tested this patch doing DMA buffer sharing between a
>>>> vivid input and output device with both v4l2-ctl and gst:
>>>>
>>>> $ v4l2-ctl -d0 -e1 --stream-dmabuf --stream-out-mmap
>>>> $ v4l2-ctl -d0 -e1 --stream-mmap --stream-out-dmabuf
>>>> $ gst-launch-1.0 v4l2src device=/dev/video0 io-mode=dmabuf ! v4l2sink device=/dev/video1 io-mode=dmabuf-import
>>>>
>>>> And I didn't find any issues but more testing will be appreciated.
>>>>
>>>> Best regards,
>>>> Javier
>>>>
>>>> drivers/media/v4l2-core/videobuf2-core.c | 34 +++++++++++++++++++++-----------
>>>> 1 file changed, 22 insertions(+), 12 deletions(-)
>>>>
>>>> diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c
>>>> index 7128b09810be..973331efaf79 100644
>>>> --- a/drivers/media/v4l2-core/videobuf2-core.c
>>>> +++ b/drivers/media/v4l2-core/videobuf2-core.c
>>>> @@ -958,6 +958,22 @@ void *vb2_plane_cookie(struct vb2_buffer *vb, unsigned int plane_no)
>>>> EXPORT_SYMBOL_GPL(vb2_plane_cookie);
>>>>
>>>> /**
>>>> + * __vb2_unmap_dmabuf() - unmap dma-buf attached to buffer planes
>>>> + */
>>>> +static void __vb2_unmap_dmabuf(struct vb2_buffer *vb)
>>>> +{
>>>> + int i;
>>>> +
>>>> + for (i = 0; i < vb->num_planes; ++i) {
>>>> + if (!vb->planes[i].dbuf_mapped)
>>>> + continue;
>>>> + call_void_memop(vb, unmap_dmabuf,
>>>> + vb->planes[i].mem_priv);
>>>
>>> Does unmap_dmabuf work in interrupt context? Since vb2_buffer_done can be called from
>>> an irq handler this is a concern.
>>>
>>
>> Good point, I believe it shouldn't be called from atomic context since both
>> the dma_buf_vunmap() and dma_buf_unmap_attachment() functions can sleep.
>>
>>> That said, vb2_buffer_done already calls call_void_memop(vb, finish, vb->planes[plane].mem_priv);
>>> to sync buffers, and that can take a long time as well. So it is not a good idea to
>>> have this in vb2_buffer_done.
>>>
>>
>> I see.
>>
>>> What I would like to see is to have vb2 handle this finish() call and the vb2_unmap_dmabuf
>>> in some workthread or equivalent.
>>>
>>> It would complicate matters somewhat in vb2, but it would simplify drivers since these
>>> actions would not longer take place in interrupt context.
>>>
>>> I think this patch makes sense, but I would prefer that this is moved out of the interrupt
>>> context.
>>>
>>
>> Ok, I can take a look to this and handle the finish() and unmap_dmabuf()
>> out of interrupt context as you suggested.
>
> I have a patch doing the former which is a part of my cache management
> fix patchset:
>
> <URL:http://git.retiisi.org.uk/?p=~sailus/linux.git;a=commitdiff;h=b57f937627abda158ada01a3297dbb0f0a57b515>
> <URL:http://git.retiisi.org.uk/?p=~sailus/linux.git;a=shortlog;h=refs/heads/vb2-dc-noncoherent>
>
Interesting, thanks for the links.
> There were a few drivers doing nasty things with memory that I couldn't
> quite fix back then. Just FYI.
>
Did you mean that there were issues with moving finish mem op call to DQBUF?
Do you recall what these drivers were or what were doing that caused problems?
In any case, what Hans proposed AFAIU is not to change when the finish call
happens but to split the vb2_buffer_done() function and defer part of it to
a workqueue or kthread. I'll give a try to that approach probably tomorrow.
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
